air wing rack with led light

[KevinC1980]

I put the air wing rack on the Freewheeler today. I also got the smoked LED light to go in it. After installing the light, running the wire, and removing the seat, I learn the adapter Harley sells with the kit does not work on the Freewheeler. The Y adapter to plug into the tail light harness is a 6 pin adapter. The Freewheeler has an 8 pin plug for the tail light harness... Any suggestions as to a part number to request from them to get the right harness so I dont have to cut and splice wires? The harness and kit they sell for the Freewheeler is for the Ultra/Triglide, and they have a 6 pin plug on the tail light harness. We popped the seat on my dads '14 Ultra and its a perfect fit.

[dirtdobber]

I have run into almost the same thing when I was wiring my gps. When using the zomo wiring it has to be plugged in before the Y adapter. Gives 2 sources for power.
It's backwards

[Springman2007]

Please see the post I created called "2015 FLRT Rear Wiring Harness Insert"

Hope this Helps,

Springman

PS - Ask Zook to make it a Sticky if you like

[KevinC1980]

Please see the post I created called "2015 FLRT Rear Wiring Harness Insert"

Hope this Helps,

Springman

PS - Ask Zook to make it a Sticky if you like

That post will be of great help! I went back to Harley today and Harley and myself found out that the Freewheeler does not have a Y connector yet. So I will have to make one. They will be making the contacts this week to let them know that apparently the Freewheeler has a different harness and different plugs than all the other bikes they have. They were scratching their heads as to why Harley did this.

[dirtdobber]

Is it possible to use the accessory plug under the left cover?
The touring bike rear extra run/brake light uses this plug.
On the flrt you have to use their gps plug to connect the Y adapter which has 2 sets of working on the 4 prong plug.
I will double check my adapter to see if they can still do the run/brake from that plug.
By using the gps plug you get 2 extra accessory plugs plus the gps if you use the wired connections.
The Y plug will not fit the accessory plug on the flrt.
Just guessing here.

[Mudxshark]

Open road outfitters makes a plug-n-play harness, $129.00, Just the Y splitter is $30.00

[Springman2007]

Here is the post you need to understand the rear wiring tail of the Freewheeler:

http://www.triketalk.com/forum/threa...Harness-Insert

I have to confess that for the Air Wing Rack light, I just ran it over in the left fender and attached it to that rear fender light assembly on my trike..... If that is all your adding (rear light - wise) you don't need to go to too much trouble to do so.....

PS - I don't know about you and your Air Wing Light - but I think mine is pretty weak (Brightness Wise) - that is something I wish someone would offer us a brighter version of........
Springman

[mrbob]

I hooked in my wing light to the wires running to the tail lights. The book wiring shows both side have the same color wires. I found the wires right behind the seat running along the trunk. I spliced in to it in the middle. Black to black, blue to blue and blue,red to blue red. Wing light works good on an when I hit the brake lights foot and hand. The air wing flashes when left turn signal is on too, but right turn signal doesn't. Does this all make sense?