M 8 Head Breather Rerouting

[Jack Klarich]

M8 Head Breathers

• 
  
  
  
  
  
  
  Drill a hole 5/16th at the back of the stock air cleaner back plate.
  T the breather hoses off the head bolts
  Run the New line down the back of the backing plate out the hole
  Down the back of the engine and down under the oil tank
  That is where I put on the in line filter, I used a brake fluid master cylinder bleeder on the female end, the male end gets a plastic cap for draining
  
  
  
  
  
  And it works good, I got about a teaspoon of oil @ 150 miles today with 3420 miles on so far and Quicksilver 20-50 oil my first time EVER using synthetic oil
  
  
  The filter can be had for about 20.00, I have 2 of them so the new one became the sacrifice

[Jack Klarich]

M8 Head Breathers

• 
  
  
  
  
  
  
  Drill a hole 5/16th at the back of the stock air cleaner back plate.
  T the breather hoses off the head bolts
  Run the New line down the back of the backing plate out the hole
  Down the back of the engine and down under the oil tank
  That is where I put on the in line filter, I used a brake fluid master cylinder bleeder on the female end, the male end gets a plastic cap for draining
  
  
  
  
  
  And it works good, I got about a teaspoon of oil @ 150 miles today with 3420 miles on so far and Quicksilver 20-50 oil my first time EVER using synthetic oil
  
  
  The filter can be had for about 20.00, I have 2 of them so the new one became the sacrifice

I have since added a new filter with a drain on it

[vito]

Be very sure that the new breather can breath freely.

[Jack Klarich]

Be very sure that the new breather can breath freely.

It does and easy to drain

[Jack Klarich]

Final breather is done if y'all want I WILL POST PICS OR make y'all one cheap aint no business or looking to make a killing on this product

[aeroshots]

Final breather is done if y'all want I WILL POST PICS OR make y'all one cheap aint no business or looking to make a killing on this product

A teaspoon of oil per 150 miles seem a lot to me. My first thought is oil level. Don't get me wrong, this is just my thought. You may be okie dokie with it and that's okie dokie. I just completed the mod on mine and will be watching oil caught closely.
By the way, the M8 vent modification is so much easier than my Softtail Slim S. I'm still looking for some very small fittings to thread into the vent bolts.

[gerald martin]

Final breather is done if y'all want I WILL POST PICS OR make y'all one cheap aint no business or looking to make a killing on this product

Pictures would be great thanks

[Jack Klarich]

Pictures would be great thanks

I have a new design again send me your e mail

[gerald martin]

I have a new design again send me your e mail

Martingw@telus.net
Thanks

[Jack Klarich]

Martingw@telus.net

Thanks

Got it