2016 Tri glide handlebars

[Waldo1]

Oh yeah , i see where i can unplug it but the plug in side wont go through the handle bars with out removing it so its just 4 wires so ill cut and solider color to color cant go wrong at least i hope lol,

[Fearless]

A good number of those plugs have releases on the wires I don't know if the TBW has though would save splices if it did. fearless

Oh yeah , i see where i can unplug it but the plug in side wont go through the handle bars with out removing it so its just 4 wires so ill cut and solider color to color cant go wrong at least i hope lol,

[1dn5up]

You can un plug the wires from the plug, gota release the locking pins at each terminal. Take pix or mark as to ware they get plugged back to.

- - - Updated - - -

[QUOTE=Casper;402638]The Khrome Werks 2+2 narrow Sweepers are great, I'm 5'7" with 29" sleeve and they work great for me

Would that be part # 300519 ? Or 18 ?

[Waldo1]

300517A on the site but they told me that sites like JP cycles use different numbers and in fact that site said it would not fit my but the owner at Krome works said that the one for me it was the wide, and yes i did see where the pins come off and i will do it slow maybe this weekend if its raining here for sure i'll post picks and update again thanks to all who guided me

[Fearless]

Not hard just take your time you will love the changes and be able to say you did it yourself

300517A on the site but they told me that sites like JP cycles use different numbers and in fact that site said it would not fit my but the owner at Krome works said that the one for me it was the wide, and yes i did see where the pins come off and i will do it slow maybe this weekend if its raining here for sure i'll post picks and update again thanks to all who guided me

[Waldo1]

Well i got the exhaust on last night wow now it sounds like a HARLEY should, will install the HWY pegs tonight with the floor board extenders , now for the bad I ordered the sweepers from J&P and the bushings ,well the bushings came in and no bars so this morning some lady tells me they processing and cant locate them in the warehouse, so i call again this time i got a new lady that knows whats going on so she said it will go out today hummmmm but the bad thing is when i ordered the exhaust i did over night and got them 2 days late so they gonna refund me but dangggg man , so thats where i strand

[Fearless]

If you are clear about you expect about the shipping costs they will make it right I have had the same thing happen to me and they are a stand up company going through some pains themselves. keep us posted . fearless

Well i got the exhaust on last night wow now it sounds like a HARLEY should, will install the HWY pegs tonight with the floor board extenders , now for the bad I ordered the sweepers from J&P and the bushings ,well the bushings came in and no bars so this morning some lady tells me they processing and cant locate them in the warehouse, so i call again this time i got a new lady that knows whats going on so she said it will go out today hummmmm but the bad thing is when i ordered the exhaust i did over night and got them 2 days late so they gonna refund me but dangggg man , so thats where i strand

[Waldo1]

Update , got the floor board extenders on last night and put the hwy pegs on but didnt set them yet until i get the handle bars on, got a shipping update they will be here monday so i have to wait on that but i'll take all the stuff off this weekend and post pics

[Sloufoot]

J&P had some real problems with moving their warehouse this year. Hope they got everything straightened out. For a while they were running 90 days + behind.

[tbear]

Well i got the exhaust on last night wow now it sounds like a HARLEY should, will install the HWY pegs tonight with the floor board extenders , now for the bad I ordered the sweepers from J&P and the bushings ,well the bushings came in and no bars so this morning some lady tells me they processing and cant locate them in the warehouse, so i call again this time i got a new lady that knows whats going on so she said it will go out today hummmmm but the bad thing is when i ordered the exhaust i did over night and got them 2 days late so they gonna refund me but dangggg man , so thats where i strand

I ordered mine from Krome Werks directly and it took 3 days.

[HDB0B]

Oh yeah , i see where i can unplug it but the plug in side wont go through the handle bars with out removing it so its just 4 wires so ill cut and solider color to color cant go wrong at least i hope lol,

You can use a needle to release the pin locking tabs from the connector. You then pull the wires through and re-insert the pins into the connector.

Bob

[Waldo1]

Well i got it took all apart all went well EXCEPT that little Trip Reset Button i broke it but all is good i'll get them to order one and swap it for me the reset still works i have to use my finger, the handle bars will be in today so i'll start tonight and it looks like the TBW wire will slip right through without taking them apart , i took them out the other bars with no problems at all here are the pics, oh i did swap the bushing also got ride of them flimsy rubber ones

[Waldo1]

HERE are more pics

[HDB0B]

What did you purchase to replace the "flimsy" rubber bushings?

Thanks,

Bob

[1dn5up]

Bars are a subjective preference... what feels good to one will be all wrong for another. Take a look around at other riders and see what they are using, and most would gladly (I think) let you check their setup out for feel. I am 5' 5" and went with the HD reduced reach bars on my '14 TG. Over 50K miles later I traded it in on the "17, and was happy enough with the bars that I had the dealer install them on the new one. By the way, they also come in black and with the wires run inside the bars, they look as sweet as they feel!

Again, just my opinion

Do you have the part # with the throttle installed ? Tks.

[1dn5up]

I ordered the 2+2 WIDE SWEEPERS , NEW BUSHINGS, new slip on's , hwy pegs, floor board extensions , gonna go all the way with her,

keep going, you can do it !

[Waldo1]

i installed the polyurethane bushings was easy, what part number ya looking far, the sweeper bars if so its the one that ends in 17A, i called them and he told me thats the one i needed

[Waldo1]

ok here ya go

[Waldo1]

Now i caint seem to find where that small plug goes with the black and white wires i dont remember unplugging it but i read that its for heated hand grips does anyone know ????? thanks looks like ill be done tonight , man what a difference just sitting on it

[1dn5up]

Now i caint seem to find where that small plug goes with the black and white wires i dont remember unplugging it but i read that its for heated hand grips does anyone know ????? thanks looks like ill be done tonight , man what a difference just sitting on it

on mine, the right heated grip gets plugged into the center of the DBW . Two wire plug. Then the rubber cap covers it. I think it's what you ask