2003 Goldwing still has driver pegs. Want to install floor boards, also down and forward a bit. Do floor boards work on trikes and what do you like?
Thanks Joe
2003 Goldwing still has driver pegs. Want to install floor boards, also down and forward a bit. Do floor boards work on trikes and what do you like?
Thanks Joe
If you install weight bearing foot fairings you can remove the pegs and rest your feet on them. Lowers your feet and is much more comfortable. Also install a Kurt heel rest to assist using the foot brake
Christian Motorcyclist Association #64488
Patriot Guard
Volunteer Fire/Rescue/EMT/Captain
Was a LEO
Part time Corrections Officer
These are common in this area. I have them and am pleased with them.
http://wingstuff.com/products/2624-k...w-heel-shifter
- - - - - - - - - - - - - - - -
2008 Stallion
Reading, PA 19606
- - - - - - - - - - - - - - - -
Jerry "Gold Rush" (aka: "SPOOK") San Angelo, TX
2015 GL1800/Roadsmith HTS1800
TOI - IBA #23804 (SS1K & BB1.5K)
I'm like an old race horse..... I can still run the race -- Just ache more at the finish line and need more rest between outings.
Comment from a owner on another forum:
"I have the Accent Panels on my Champion and really like them. The two extra large yellow running lights in the front help on being visible. Plus, I am 6'2", 290lbs and the foot peg location on the wing was causing me to get cramps in my legs. I took the pegs off and put my feet on the Accent Panels when RIDING ONLY. I do not step on the panels to mount or dismount, just rest my feet on them."
Christian Motorcyclist Association #64488
Patriot Guard
Volunteer Fire/Rescue/EMT/Captain
Was a LEO
Part time Corrections Officer
Good info!!! Thanks for "Birddogging" that for us!!
Jerry "Gold Rush" (aka: "SPOOK") San Angelo, TX
2015 GL1800/Roadsmith HTS1800
TOI - IBA #23804 (SS1K & BB1.5K)
I'm like an old race horse..... I can still run the race -- Just ache more at the finish line and need more rest between outings.
I have a Lehman Trike kit on a 2012 GL1800. The trike has weight bearing Aqua Shields and I installed the Kury floor boards with the toe heal shiffter as well. The trick here is on the Lehman Kit there are 2 different shape small brackets that replace the OEM supports that support the Aqua Shields attaching them to the OEM Peg mounting brackets. These brackets allow space for the driver boards to be mounted while still maintaining the weight bearing features.
I use the Kury boards to mount and dis-mount the bike. Champion which mow has purchased Lehman may have these addition brackets that would fit the Champion Trike. I can give you the Lehman Parts numbers if you wish. It may be worth a call to Champion to see if they would fit.
If referring to running boards, some manufactures make them weight bearing and some don't.
Just and FYI ... be aware that some running boards make clutch fluid changes, evaporative control system inspections, and coolant changes more labor intensive. On some, the running boards must be removed or pulled loose in order to remove the lower center cowl. According to Honda, some of those services need done every 12,000 miles.
I have the Kury floorboards and heel toe shifter as well and really like them. Roadsmith makes forward comfort controls for the Goldwing.
http://trikeshop.com/shop/product/726/comfort-controls/