Hello. just installed LED headlight on my Harley Freewheeler. I can see the adjusting bolt for vertical adjustment but can't get on it to loosen. Any trick or special tool? Thanks
Hello. just installed LED headlight on my Harley Freewheeler. I can see the adjusting bolt for vertical adjustment but can't get on it to loosen. Any trick or special tool? Thanks
Use two long 9/16th wrenches with steering straight ahead, the bolt is tight as hell
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL
Thank you. Cut a 9/16" wrench off and slipper a piece of 3/4" pipe over wrench. worked great!
I used 9/16 ratcheting boxed wrenches
How do you get to the bolt to adjust light front, rear or bottom
Ya got to look at the front end ahead of the gas tank, U will see the bolts thru the block, they are 3/8 inch= 9/16th wrench, Pretty stinkin tight
Now the one goes thru left to right that is 4 uo and down
The 1 thru the bottom { Straight up} u can get it from the front of the bike, cover ur fender so ya dont ding the paint
This bolt IF u get it loose U can swing the light bucket L and R
Look at #44 here
Nuff Said," Were Burnin Daylight, Lets Ride"(Sober 37 years)
Current ride : 2021 FREEWHEELER M8, oldest ride 1960 FL