On a Gen 2 Gold Wing Hannigan, I need to know the outside-to-outside dimension of the rear wheel tire tracks.
Thanks!
On a Gen 2 Gold Wing Hannigan, I need to know the outside-to-outside dimension of the rear wheel tire tracks.
Thanks!
Wing with Roadsmith kit, Traxxion Ak20 cartridges and Accuride System.
07 ST 1300 for two-wheeled fun!
Width 61.5" Track Width 51"
http://www.hannigantrikes.com/produc...00-conversion/
Christian Motorcyclist Association #64488
Patriot Guard
Volunteer Fire/Rescue/EMT/Captain
Was a LEO
Part time Corrections Officer
Hmmm.... the one in my garage...
"rear wheel tire tracks"
Fart... I've got 58" - outside bulge to outside bulge...
56 ˝” – 57” Outside to Outside Tire Track, depending how you look at it…
(I believe "wheel track" or "Track Width" is center of tire to center of tire)
Yup, yup...
I guess the question of the hour is whatdayaneeditfor?
Let me offer a small bit of advice. Tell your friend not to do it. When I looked for an enclosed trailer for my Gen II I decided pretty quickly that only a 7X12 would work. If your friend has an open trailer, you need at least 64-65 inches since the trike is 61-63 inches wide. Even then you don't have much room if he hits a bump and it moves. Repairing and repainting a fender is not worth what little a bigger trailer would cost. I only Trike I ever saw fit comfortably in a 5X10 open trailer was a Triglide, but those are so small anyway it didn't matter.
As far as an enclosed, I even tried a 6X10 and couldn't even get it thru the doors. Just a thought. Also, my new enclosed 7X12 gives my plenty of room to walk around the bike after it is loaded and cost less than a major repair to the trike kit if something would have happened.