Likes: 0
Thanks: 0
Re: Ok here goes, My first trike build
Thanks man love what your doin. I got a rear end out of a golf cart that im gonna try to make work soo we will see. Oh about shortening your rear axel did you do that all yourself. If so would love to know how you did. Cause that might be my other option.
Thanks again for all your info. Cant wait to see the finished product
Re: Ok here goes, My first trike build
that sounds cool make sure you put it on here so we all can follow what you are doing. as far as my shortening the axle housing, don't know about the golf kart but on a car or truck rear you drill out the factory weld pull out the housing from the pumkin then cut it down then insert and reweld, as far as the axle check with a machine shop in your area to see if they can shorten and respline it.
Re: Ok here goes, My first trike build
I got the brakes bled and working on the rear and the emergency brake hooked up and working. Also picked up a set of xs1100 special front forks,calipers,and fender that moves the front wheel out about 2 inches, so that should help with the rake on the bike and they are longer too. So I may not need a rake kit to make it steer easier. Also tried the pinesol cleaner (Original) treatment on my carbs and to my surprize it work really well. I let them soak for 2 days and what a difference and it won't harm any rubber or plasic on your carbs. once the forks get here I will install them, then turn my attention to the body of some sort haven't decided yet wheather to buy one or build one. Hey anyone got any ideas on what body to u se or to build one?
Re: Ok here goes, My first trike build
What kind of tire would work the best on the front of my trike that I am building? tire on it now is 3.50 h19 Also the front forks I am using are off a xs1100 special which are 3 inches longer and move the wheel from the bottom of the forks to the front of the forks and are air assist. which should help with my rake of the forks. I am rebuilding the forks should I replace the springs for something a little stiffer?
Re: Ok here goes, My first trike build
Front forks are on and the front wheel is 1 3/4 further out then it was before, I think that alone reduced the trail which should help with the steering. I think I have located a avon tire that is like a car tire, flatter across the center of the tire and wider. Avon SM Mark II Rear Tire - Cruiser Motorcycle - Motorcycle Superstore check it out.
Re: Ok here goes, My first trike build
Ok kind of at a stand still with the holiday and ordering some parts I need to continue with the build, so it may be after the holidays before I start the build again.
SO MERRY CHRISTMAS AND HAPPY NEW YEARS TO EVERYONE.
Re: Ok here goes, My first trike build
The same back to you, can't wait to see the it finished
[SIGPIC][/SIGPIC]
Threedom to Ride!!
2011 FLHTCU/Motortrike
Re: Ok here goes, My first trike build
ok I am at it again, got some parts in. So this is where I started. I found a small flywheel from a local speed shop, it is used but in good shape, Hey for 20 bucks who cares if I destroy it but I didn't because a new one costs 75 bucks. It fits a small block chevy but ford will work also. I had to machine out the center hole to make it fit over the rear pinion flange and weld it in place. Pic no.1
Re: Ok here goes, My first trike build
The flywheel is made by bert racing transmissions in canada and the local speed shop will charge you anywhere from 50 to 75 bucks for this. It is only 6 1/2 inches wide and a regular starter will work with it. I am going to find a small starter for it. then wire it in with a relay and a push button on the handle bars. So when you put the bike in neutral and push the button it should move backwards at a slow pace. I will post more pics as I go along.
Re: Ok here goes, My first trike build
got the rear back on and now the trike is setting on jack stands and the front wheel.
Re: Ok here goes, My first trike build
Glad your progress is going well
[SIGPIC][/SIGPIC]
Threedom to Ride!!
2011 FLHTCU/Motortrike
Re: Ok here goes, My first trike build
Is the flywheel going to be used for a reverse? I have been following along just not saying anything till now. Also I saw where you were asking about a body. My question would be do you want to mount the body in conjunction with the differential or to the frame? When I built my wife's trike I made a frame for the body to sit on, which that frame is attached to the differential. By doing this I was able to hang the fenders very close to the tires as they move in unison with the differential. If your looking for body ideas still I will give some input if you want it, but really need to see clear pictures of the whole rear setup. I like your ideas so far.Originally Posted by dcryder
Danny
Re: Ok here goes, My first trike build
Yes the flywheel is for reverse setup. And yes I am interested in your ideas on a body setup. will try and take better pictures tomorrow and post them so you can see what I have done so far.
Re: Ok here goes, My first trike build
hey got board so I took some pics.
Last edited by dcryder; 01-05-2012 at 08:31 PM. Reason: pics
Re: Ok here goes, My first trike build
I see where you have mounted your shocks, but from the pictures I'm a little confused to the up & down movement. Where is the pivot point? If you want to email me directly you can at hardone2get@yahoo.com
What ideas do you have in your head as to what shape would you like to see on the body?
Re: Ok here goes, My first trike build
I found a subaru starter and fabricated a mount for it to go on the rearend. That took awhile but I got it done and it works perfectly.
Re: Ok here goes, My first trike build
I'm curious as to what the reverse speed will be? That's a great idea you came up with. I got your email and when I get home tonight I will reply with some pictures and ideas.
Re: Ok here goes, My first trike build
The subaru starter I got has gear reduction so it shouldn't be to fast at all. And I am looking forward to the pics and ideas.
Re: Ok here goes, My first trike build
I orderd 2 fenders today should have them in a week or so. Now got to go get some sheet metal to start forming the body. I have built stock car bodies but this is going to be different and harder I think, we will see.
Re: Ok here goes, My first trike build
I have been working on some other things as well, got the carbs back on after cleaning and rebuilding them and half of the airbox as well. Also ran the new wiring for the starter and relays I am using now to find some sort of starter botton or momentary switch to put on the handle bars.
Posting Permissions
