• Hannigan's New 180 Front End for Honda GL1800 Trikes

    Once again Hannigan Motorsports sets the new standard for the trike industry with the Hannigan 180 Front End for all Honda Gold Wing trikes and sidecars 2001 to current and all BMW K1600GTL/GT trikes and sidecars 2012 to current. The new Hannigan 180 Front End gives your trike the handling, traction and tire life you've been waiting for.

    Until now, the limiting factor for handling on a premium trike has been the front tire. When ridden hard in a curve the stock front tire will start to slip, skip, and chatter. The 180 wide tire included in the front end package stays planted in the curves, providing greater stability and performance. This translates into a greater safety margin for all riders. Even those who do not normally push their trikes to the limits of traction will find that the 180 Front End improves their ability to change direction more quickly and brake harder in emergency situations. It also increases your level of confidence in low traction weather conditions. Ride quality is significantly improved with the 180 Front End and grooved pavement or grated steel bridges no longer cause your three wheel motorcycle to hunt and weave. With regard to tire life, Michelin claims 25,000 miles of longevity for their new 180 Commander tire on the rear of a two wheel Gold Wing.

    Now you can utilize this new wide double compound, deep tread tire on the front of your trike or sidecar rig. The 180mm tire is 2 wider than the standard OEM width tire. The 180 kit comes with a proprietary extra wide chrome or polished aluminum front wheel matched to the tire, so it looks as good as it performs. The wide wheel and tire necessitate the use of longer Spiegler custom fabricated hard brake lines, also included. You have made the rear end of your motorcycle wider with the installation of a trike kit. The Hannigan 180 front end restores a sense of proportion and gives you bragging rights where motorcyclists gather.


    Also included is an extra wide and long replacement fender made of hand laid laminated fiberglass and color matched to your motorcycle. It provides enhanced protection for the paint on your rear fenders without the need for a fender extender. On the Honda Gold Wing the kit includes proprietary extra wide upper and lower fork yokes machined out of 1661 billet. The BMW K1600GTL/GT utilizes a wide modified Hossack. In each case this Steer Lite feature with an additional 5 degrees of rake angle reduces steering effort by 60% compared to a stock front end.

    Jim Wheels Leatherman had the 180 Front End installed on his new Hannigan Gold Wing trike and sent this report:
    The new Hannigan 180 Front End with the 5 rake and fork brace has made a significant improvement to my trike riding experience. In just a few short miles, I have noticed that the trike is much more responsive and holds its lines much better as compared to the standard Gold Wing front end. It's very smooth, and the wider tire patch grips/holds the road surface well in wet conditions. The molded, custom made fiberglass two piece fender added great detail and functionality to the trike while helping to keep road debris from being thrown back onto the trike. I am extremely pleased with adding this new feature to my Hannigan Trike.

    The 180 Front End package may be installed on any Gold Wing 1800 or BMW K1600GTL/GT trike or sidecar, regardless of brand. The addition of the Hannigan 180 kit to a non-Hannigan trike will not make it ride as well as a Hannigan, but it helps.

    The entire package, including extra wide wheel, upper and lower fork yokes (or wide modified Hossack on the BMW), color matched longer, wider fender, longer brake lines and Michelin Commander tire retails for $2995, heavy fork springs and installation extra.

    Hannigan Motorsports is currently offering a Year End Steer Lite Special, deducting $995 from the price of any 180 Front End kit with the purchase of a Hannigan trike before December 31, 2013. Order your Hannigan trike conversion now and add the complete 180 Front End for only $2000.

    Hannigan Motorsports
    Murray, Kentucky
    (270) 753-4256


    Comments 1 Comment
    1. ben721364's Avatar
      ben721364 -
      Way to go! Hannigan leads the way.
  • Latest Sponsor Posts

    trikeman

    Check valve

    trikeman Yesterday, 10:27 PM Go to last post
    old willie

    U joint

    I called Mike at Roadsmith and got a part number for the U joint. Went to NAPA and picked one up. Finished installing it today and we are leaving on a

    old willie Yesterday, 08:29 PM Go to last post
    mhgoldwing

    Maintenance time

    Duc! Now you're talking some serious fun! I don't heal fast enough any longer to ride one of those and I would surely get myself into trouble. My ST1300

    mhgoldwing Yesterday, 03:07 PM Go to last post
    TTNW

    Fender heigth

    Lee:

    I checked the distance on my trike and it sits 23.5 inches. I've installed the Overload Spring on the Aux Shock per our discussion

    TTNW Yesterday, 02:31 PM Go to last post
    bikerbillone

    Maintenance time

    Oh yes, Roger That.....Catching up with some of my 'stuff' so we can do that. Millie loves to ride 'back set', so we are compatible.

    bikerbillone Yesterday, 01:04 PM Go to last post
    Bucco33!

    Maintenance time

    Looking forward to getting back up there and seeing how our trike handles on all the roads weve ridden over the years! Going to be different not peg

    Bucco33! Yesterday, 12:37 PM Go to last post
    mhgoldwing

    Maintenance time

    You know your trike has wheels, right? You're close enough to make a long weekend trip to MV! Some of those north Georgia roads ain't bad either. Just

    mhgoldwing Yesterday, 10:34 AM Go to last post
    bikerbillone

    Maintenance time

    Thanks Mike, appreciate the kind words. Plan to do 3 days at the TT ride in at Maggie, then spend some time with an old Post Office buddy now living

    bikerbillone Yesterday, 05:44 AM Go to last post
    mhgoldwing

    Maintenance time

    Love Maggie Valley and have used it as base camp several times. So many neat roads to ride other than The Dragon which I have several t-shirts from.

    mhgoldwing Yesterday, 05:35 AM Go to last post
    bikerbillone

    Maintenance time

    AT Brother Zook's recommendation, I'm now running 23 psi in the rears, he was right, better ride. However, I've not tested that in the twisties, so not

    bikerbillone Yesterday, 05:02 AM Go to last post
    Marc H

    Check valve

    I always thought residual check valves were for when the master cylinder was below the calipers.What is the purpose of the one on the front cyl? 89 Goldwing

    Marc H 08-13-2018, 07:46 PM Go to last post
    mhgoldwing

    Maintenance time

    I know many like the 22 -24 psi in the rears. However, for me, I have found that with two-up I can feel my Michelin rear tires feeling "loosey goosey"

    mhgoldwing 08-13-2018, 08:47 AM Go to last post
    Burnerboy

    Maintenance time

    I'm also going to try 22-24 lbs in rear(s) thanks for the info here..

    Not sure what I now have in there NOW but going out this morning for

    Burnerboy 08-13-2018, 07:22 AM Go to last post
    triwinggirl

    Sitting on my hands

    again im way curious, how are the repairs going?

    triwinggirl 08-13-2018, 12:13 AM Go to last post
    werewolf

    My Trike Riding Experience

    Beautiful Valk!

    werewolf 08-12-2018, 09:20 PM Go to last post
    mhgoldwing

    U joint

    I would call RS regardless as this may be a warranty claim or at least one they might choose to fix for you.

    mhgoldwing 08-12-2018, 08:34 PM Go to last post
    old willie

    U joint

    I have a 2012 Gold Wing with a 2017 Trike conversion. I noticed the grease seal on the rear universal joint has came apart on one side. Can I get a new

    old willie 08-12-2018, 08:16 PM Go to last post
    Burnerboy

    My Trike Riding Experience

    Come meet me at Scotty'ies restaurant Golfcourse, we go there quite often... I don't golf, but the food there is excellent, then off we go for a ride,

    Burnerboy 08-12-2018, 08:14 AM Go to last post
    ssgtlitz

    No easy but works

    I had very much the same problem, adjusted, adjusted and adjusted some more! I measured I cussed, and I got totally P'O' so:

    ssgtlitz 08-12-2018, 12:28 AM Go to last post
    radismukes

    My Trike Riding Experience

    Great work and Welcome to the group!

    radismukes 08-11-2018, 10:58 PM Go to last post
    Gorilla

    My Trike Riding Experience

    Frank nice trike. Thank you for posting your experience. Not many people can give the before and after report that verifies what we all say about adding

    Gorilla 08-11-2018, 04:18 PM Go to last post
    Trail Blazer

    Hello Frank

    welcome to trike talk from east Texas, oh I can relate to your post. I had a gl1500 triked out with 6 deg. rake. I had never road a trike of any kind.

    Trail Blazer 08-11-2018, 01:04 PM Go to last post
    frankj

    Americade

    I was parked there many times, walked around checking out the bikes and looked for your black GW Roadsmith and a Massachusetts plate, but didn't see it

    frankj 08-11-2018, 10:55 AM Go to last post
    David357

    My Trike Riding Experience

    Great lookin' trike Frank.

    Thanks for sharing such a detailed report summary. That was a great approach to understanding your personal

    David357 08-11-2018, 10:37 AM Go to last post
    Burnerboy

    My Trike Riding Experience

    Were you at the Americade rally this year???? I believe I saw your bike (or one that looked like it) on Canada Street

    Ronnie

    Burnerboy 08-11-2018, 10:15 AM Go to last post
    Burnerboy

    My Trike Riding Experience

    Interesting and a thankful post, as I (and I'm sure many others out there, thought the same thing).....When I changed over my 2010 Goldwing into a trike,

    Burnerboy 08-11-2018, 10:13 AM Go to last post
    Jack Klarich

    My Trike Riding Experience

    Nice paint

    Jack Klarich 08-11-2018, 10:10 AM Go to last post
    LadyonaMission

    My Trike Riding Experience

    Nice trike.

    LadyonaMission 08-11-2018, 10:08 AM Go to last post
    mhgoldwing

    My Trike Riding Experience

    Beautiful ride!

    mhgoldwing 08-11-2018, 10:02 AM Go to last post
    frankj

    My Trike Riding Experience

    Had no trike riding experience when I had my Valkyrie converted with a Roadsmith kit. I also wanted to experience riding it with no rake kit, I wanted

    frankj 08-11-2018, 09:50 AM Go to last post
    Lee H. Mann

    Please help;new trike rider ,old trike

    Ron,

    I just ran across your post and apologize for not seeing it earlier.

    Just looking at the picture, you own a Renegade model

    Lee H. Mann 08-10-2018, 06:22 PM Go to last post
    Lee H. Mann

    Swing arm/differential connection for Monarch II on 2005 Goldwing

    The above bushings go here ......

    Lee H. Mann 08-10-2018, 05:55 PM Go to last post
    Lee H. Mann

    Lehman trike rides very low in rear

    This is how a Lehman should sit without rider or passenger.

    This is a 2008 straight axle Monarch II

    Lee H. Mann 08-10-2018, 05:49 PM Go to last post
    Bucco33!

    Maintenance time

    My wife loved the psychotic description😂!

    Dave I would listen to Lucky and Papa Zook and their recommendations. Theyve been at

    Bucco33! 08-10-2018, 05:16 PM Go to last post
    Wind Therapy

    Bucco beat me to the punch . . .

    Bucco,

    You must be psychotic! You posted almost verbatim what I was about to do. I too was a Dark Sider, and ran my ROF Dunlop Wintersport

    Wind Therapy 08-10-2018, 12:09 PM Go to last post
    Papa Zook

    Maintenance time

    Told ya! It makes a HUGE difference. Just leave at what you have it at, it will handle the twisties, two up and trailering with no problem.

    Papa Zook 08-10-2018, 10:20 AM Go to last post
    Bucco33!

    Maintenance time

    BIG difference in ride quality so far on our flat hot roads! Thanks for the info!! I'm set at 23psi by my digital gauges and my TPMS registers one pound

    Bucco33! 08-10-2018, 09:59 AM Go to last post
    radismukes

    Testimony on using Lee H. Mann for Lehman parts!

    A Gentleman with an EXCELLANT REPUTATION!

    radismukes 08-08-2018, 10:24 PM Go to last post
    LeftWinger1940

    Appreciation

    Thanks again to Jim Murphy for his advice on driveshaft maintenance on my 1500

    trike/early Lehman conversion. I'm sure I'll have more questions

    LeftWinger1940 08-08-2018, 10:16 PM Go to last post
    CrystalPistol

    Lehman Monarch Trunk Lid

    Mine is not a Mon-II, mine is a GTL with two simple hinges and a latch, and when I bought it I was warned about hard rains or washing sprays. I fiddled

    CrystalPistol 08-08-2018, 10:02 PM Go to last post