• RoadGlide Hannigan Transformer Build

    Here is Will & Katy Orr's 2011 Road Glide before being transformed into a trike using Hannigan's Harley Transformer conversion. Will (member Fireman Will) brought his bike to our shop directly from the Kerville Hill Country Gathering. He wanted to see how a Transformer looked, rode, and handled the twisties in person before he ordered so he met up with Clint44 at the Kerville gathering to get a close up look at 'Barney', Clint's beautiful purple 2011 Street Glide Transformer that we had built for him earlier in the year.



    Will's bike before starting. This was the first Road Glide Transformer ever built.








    I hauled Will's bike to the Hannigan factory for paint and install in our enclosed Ultimate Trailer. This was the first trip of any distance using the trailer and have to say I'm loving it, super quick and easy to load. Flip a switch and the top raises, flip another switch and the air-ride system lowers the deck for loading and unloading. Also has a drive-in locking wheel chock and four built in ratchet straps so its a breeze for one person to load and secure. I'm spoiled already.

    ......continue reading here
    This article was originally published in forum thread: RoadGlide Hannigan Transformer Build started by Cut-N-Shoot Customs View original post
    Comments 34 Comments
    1. Papa Zook's Avatar
      Papa Zook -
      Attachment 31670Attachment 31671Attachment 31672Attachment 31673

      After a month of discussing paint scheme options while the kit was being built, Will and I came up with the stripes shown above. They are similar to the stripes Timmy did on Parrot HD's orange Transformer trike, but different. I know I drove Timmy crazy on the last three Transformers we've ordered because I have been on site for all three and directed the stripe layout on every one, taking pictures and emailing them to the owners during the process for their final approval. All were changed and tweeked a bit before final paint to get the perfect paint job and all turned out phenomenal. A big thanks to Timmy and Hannigan for putting up with my perfectionism.
    1. Papa Zook's Avatar
      Papa Zook -
      Attachment 31689

      Attachment 31693

      Attachment 31690

      Timmy does good work. Clear is on, now it bakes for a while. Tell me what you think?







      Attachment 31691

      Paint cured, water sanded and buffed.







      Attachment 31692

      Pictures really dont do this paint job justice. You have to see it in the light to appreciate it. The color match is dead on.







      Attachment 31694

      Paint all done, now its time to start building a trike.
    1. Papa Zook's Avatar
      Papa Zook -
      Attachment 31695

      Now the fun starts. Installed one of our 9 degree (+5) rake kits, trike kit is ready, about to tear the bike down.








      Attachment 31696

      Bike torn down and ready to become a trike...no backing out now Will









      Attachment 31697

      The only required cutting on the bike is the removal of a small pencil eraser sized corner off of a factory tab on the right side for clearance. It looks worse than it is so I didn't send Will this picture as I didn't want to freak him out...LOL
    1. Sully's Avatar
      Sully -
      Thats looking great, and the paint is
    1. Papa Zook's Avatar
      Papa Zook -
      Kit is on, now to do final alignment of the body and side panels.

      Attachment 31707

      Tour Pack mounts installed, starting to look like a trike now. The side panels are custom Hannigan parts and replace the stock side panels. These panels really give the Transformer bagger trike a very unique custom look as the reach up and hug the gas tank and exactly fit the lines of the body. Very custom and very clean!

      Attachment 31704

      Side panels and body adjusted, time to tighten everything down. Grade eight bolts and nylock nuts used throughout and all fasteners are witness marked with a white paint pen on every single nut and bolt after tightening. Attention to every detail is the difference between a good trike build and a bad one.

      Attachment 31705

      Sat the seat in place, now have to mark and trim the flat top part of the body to allow the seat to fit down into the body and onto the replacement stub fender. This part requires skill and patience to get just right. We don't rush installs, we get them right the first time. Those big volume dealers who brag on a one day paint and install scare me. I have seen some and they are not what I would want, they look good at 20 feet away but get up close and you will see what a one day paint and install looks like.

      Attachment 31706
    1. FuzzyWuzHe's Avatar
      FuzzyWuzHe -
      Sweet ride ... another Hannigan winner.
    1. Papa Zook's Avatar
      Papa Zook -
      Attachment 31708

      Brad marks and trims the body for seat fitment. Hannigan purposely leaves this part of the body extra wide as different seats require different sized openings, otherwise there would be a large gap. The Corbin seats for an example are narrower than the stock tour seats. This method produces a perfect custom fit no matter what seat is used.
    1. Papa Zook's Avatar
      Papa Zook -
      Attachment 31718

      This is the seat before trimming the upper body which will allow the seat to drop into place. When it rests on the fender below it is in the same position as stock.







      Attachment 31714

      After careful trimming, the rear of the seat now sits down snug on the rear fender which is no longer the stock Harley fender as it is replaced with a thick fiberglass stub fender supplied by Hannigan. The seat attachment is the same and uses the stock Harley bolt to hold the seat in place.







      Attachment 31713

      See how much lower the seat fits than before? Perfect fitment for a clean professional look. This picture shows the Fast Back option installed. The tour pack can be removed and the Fast Back cover installed to give the trike two distinctly different looks. I love this option.
    1. Papa Zook's Avatar
      Papa Zook -
      Attachment 31719


      Attachment 31720

      This is how trike shops align the rear wheels using two 8 foot fluorescent light tubes measuring to the front wheel rim. Strange huh...but it works.
    1. trikermutha's Avatar
      trikermutha -
      Bike is sharp.. Brad be careful cutting I see no safety glasses being worn..
    1. Papa Zook's Avatar
      Papa Zook -
      Attachment 31721

      All finished now and ready to go home to Oklahoma.

      Attachment 31722

      Attachment 31723

      Attachment 31724

      Here is Brad holding out the keys to Will's new Hannigan Transformer. Thanks Brad for another fine job. The finished trike looks, rides and handles phenomenal. I think we did good. Now y'all tell me what you think?
    1. tfdeputydawg's Avatar
      tfdeputydawg -
      Looks great. One question, how about a rear view pic? Thanks
    1. 56Elwood's Avatar
      56Elwood -
      Very unique! Nice work.
    1. Sunman's Avatar
      Sunman -
      That is one fantastic looking trike. Thanks for posting all of the photos.

      Sunman
    1. Keystone's Avatar
      Keystone -
      That is a sharp looking Trike! I've often said that HD should have the Shark-nose as an option on their Factory trikes.
    1. Papa Zook's Avatar
      Papa Zook -
      Quote Originally Posted by 56Elwood View Post
      Very unique! Nice work.
      Thanks

      Quote Originally Posted by Sunman View Post
      That is one fantastic looking trike. Thanks for posting all of the photos.

      Sunman
      Glad to. I know I enjoy seeing trike build threads, hope y'all do too.

      Quote Originally Posted by Keystone View Post
      That is a sharp looking Trike! I've often said that HD should have the Shark-nose as an option on their Factory trikes.
      I agree but doubt that will happen any time soon.

      Quote Originally Posted by tfdeputydawg View Post
      Looks great. One question, how about a rear view pic? Thanks
      Attachment 31728

      Attachment 31729

      Here are a couple of rear pics, not the best but all I got.
    1. graygoat's Avatar
      graygoat -
      Very nice looking trike, one of a kind for sure!
    1. irmagoo's Avatar
      irmagoo -
      that's one fine look'n trike!!
      I would say the time and care taken in the process shows in the results!! I really like the different look you can get by removing trunk- like a different trike!!... great job done by all!!
      magoo
    1. Lucky's Avatar
      Lucky -
      GREAT LOOKING RIDE! Thanks for the write up and Pics.
    1. trikermutha's Avatar
      trikermutha -
      Those look like LED tail lights?? Is this correct and how do they look powered up?
  • Latest Sponsor Posts

    trikeman

    Check valve

    trikeman Yesterday, 10:27 PM Go to last post
    old willie

    U joint

    I called Mike at Roadsmith and got a part number for the U joint. Went to NAPA and picked one up. Finished installing it today and we are leaving on a

    old willie Yesterday, 08:29 PM Go to last post
    mhgoldwing

    Maintenance time

    Duc! Now you're talking some serious fun! I don't heal fast enough any longer to ride one of those and I would surely get myself into trouble. My ST1300

    mhgoldwing Yesterday, 03:07 PM Go to last post
    TTNW

    Fender heigth

    Lee:

    I checked the distance on my trike and it sits 23.5 inches. I've installed the Overload Spring on the Aux Shock per our discussion

    TTNW Yesterday, 02:31 PM Go to last post
    bikerbillone

    Maintenance time

    Oh yes, Roger That.....Catching up with some of my 'stuff' so we can do that. Millie loves to ride 'back set', so we are compatible.

    bikerbillone Yesterday, 01:04 PM Go to last post
    Bucco33!

    Maintenance time

    Looking forward to getting back up there and seeing how our trike handles on all the roads we’ve ridden over the years! Going to be different not “peg

    Bucco33! Yesterday, 12:37 PM Go to last post
    mhgoldwing

    Maintenance time

    You know your trike has wheels, right? You're close enough to make a long weekend trip to MV! Some of those north Georgia roads ain't bad either. Just

    mhgoldwing Yesterday, 10:34 AM Go to last post
    bikerbillone

    Maintenance time

    Thanks Mike, appreciate the kind words. Plan to do 3 days at the TT ride in at Maggie, then spend some time with an old Post Office buddy now living

    bikerbillone Yesterday, 05:44 AM Go to last post
    mhgoldwing

    Maintenance time

    Love Maggie Valley and have used it as base camp several times. So many neat roads to ride other than The Dragon which I have several t-shirts from.

    mhgoldwing Yesterday, 05:35 AM Go to last post
    bikerbillone

    Maintenance time

    AT Brother Zook's recommendation, I'm now running 23 psi in the rears, he was right, better ride. However, I've not tested that in the twisties, so not

    bikerbillone Yesterday, 05:02 AM Go to last post
    Marc H

    Check valve

    I always thought residual check valves were for when the master cylinder was below the calipers.What is the purpose of the one on the front cyl? 89 Goldwing

    Marc H 08-13-2018, 07:46 PM Go to last post
    mhgoldwing

    Maintenance time

    I know many like the 22 -24 psi in the rears. However, for me, I have found that with two-up I can feel my Michelin rear tires feeling "loosey goosey"

    mhgoldwing 08-13-2018, 08:47 AM Go to last post
    Burnerboy

    Maintenance time

    I'm also going to try 22-24 lbs in rear(s) thanks for the info here..

    Not sure what I now have in there NOW but going out this morning for

    Burnerboy 08-13-2018, 07:22 AM Go to last post
    triwinggirl

    Sitting on my hands

    again im way curious, how are the repairs going?

    triwinggirl 08-13-2018, 12:13 AM Go to last post
    werewolf

    My Trike Riding Experience

    Beautiful Valk!

    werewolf 08-12-2018, 09:20 PM Go to last post
    mhgoldwing

    U joint

    I would call RS regardless as this may be a warranty claim or at least one they might choose to fix for you.

    mhgoldwing 08-12-2018, 08:34 PM Go to last post
    old willie

    U joint

    I have a 2012 Gold Wing with a 2017 Trike conversion. I noticed the grease seal on the rear universal joint has came apart on one side. Can I get a new

    old willie 08-12-2018, 08:16 PM Go to last post
    Burnerboy

    My Trike Riding Experience

    Come meet me at Scotty'ies restaurant Golfcourse, we go there quite often... I don't golf, but the food there is excellent, then off we go for a ride,

    Burnerboy 08-12-2018, 08:14 AM Go to last post
    ssgtlitz

    No easy but works

    I had very much the same problem, adjusted, adjusted and adjusted some more! I measured I cussed, and I got totally P'O' so:

    ssgtlitz 08-12-2018, 12:28 AM Go to last post
    radismukes

    My Trike Riding Experience

    Great work and Welcome to the group!

    radismukes 08-11-2018, 10:58 PM Go to last post
    Gorilla

    My Trike Riding Experience

    Frank nice trike. Thank you for posting your experience. Not many people can give the before and after report that verifies what we all say about adding

    Gorilla 08-11-2018, 04:18 PM Go to last post
    Trail Blazer

    Hello Frank

    welcome to trike talk from east Texas, oh I can relate to your post. I had a gl1500 triked out with 6 deg. rake. I had never road a trike of any kind.

    Trail Blazer 08-11-2018, 01:04 PM Go to last post
    frankj

    Americade

    I was parked there many times, walked around checking out the bikes and looked for your black GW Roadsmith and a Massachusetts plate, but didn't see it

    frankj 08-11-2018, 10:55 AM Go to last post
    David357

    My Trike Riding Experience

    Great lookin' trike Frank.

    Thanks for sharing such a detailed report summary. That was a great approach to understanding your personal

    David357 08-11-2018, 10:37 AM Go to last post
    Burnerboy

    My Trike Riding Experience

    Were you at the Americade rally this year???? I believe I saw your bike (or one that looked like it) on Canada Street

    Ronnie

    Burnerboy 08-11-2018, 10:15 AM Go to last post
    Burnerboy

    My Trike Riding Experience

    Interesting and a thankful post, as I (and I'm sure many others out there, thought the same thing).....When I changed over my 2010 Goldwing into a trike,

    Burnerboy 08-11-2018, 10:13 AM Go to last post
    Jack Klarich

    My Trike Riding Experience

    Nice paint

    Jack Klarich 08-11-2018, 10:10 AM Go to last post
    LadyonaMission

    My Trike Riding Experience

    Nice trike.

    LadyonaMission 08-11-2018, 10:08 AM Go to last post
    mhgoldwing

    My Trike Riding Experience

    Beautiful ride!

    mhgoldwing 08-11-2018, 10:02 AM Go to last post
    frankj

    My Trike Riding Experience

    Had no trike riding experience when I had my Valkyrie converted with a Roadsmith kit. I also wanted to experience riding it with no rake kit, I wanted

    frankj 08-11-2018, 09:50 AM Go to last post
    Lee H. Mann

    Please help;new trike rider ,old trike

    Ron,

    I just ran across your post and apologize for not seeing it earlier.

    Just looking at the picture, you own a Renegade model

    Lee H. Mann 08-10-2018, 06:22 PM Go to last post
    Lee H. Mann

    Swing arm/differential connection for Monarch II on 2005 Goldwing

    The above bushings go here ......

    Lee H. Mann 08-10-2018, 05:55 PM Go to last post
    Lee H. Mann

    Lehman trike rides very low in rear

    This is how a Lehman should sit without rider or passenger.

    This is a 2008 straight axle Monarch II

    Lee H. Mann 08-10-2018, 05:49 PM Go to last post
    Bucco33!

    Maintenance time

    My wife loved the “psychotic” description😂!

    Dave I would listen to Lucky and Papa Zook and their recommendations. They’ve been at

    Bucco33! 08-10-2018, 05:16 PM Go to last post
    Wind Therapy

    Bucco beat me to the punch . . .

    Bucco,

    You must be psychotic! You posted almost verbatim what I was about to do. I too was a Dark Sider, and ran my ROF Dunlop Wintersport

    Wind Therapy 08-10-2018, 12:09 PM Go to last post
    Papa Zook

    Maintenance time

    Told ya! It makes a HUGE difference. Just leave at what you have it at, it will handle the twisties, two up and trailering with no problem.

    Papa Zook 08-10-2018, 10:20 AM Go to last post
    Bucco33!

    Maintenance time

    BIG difference in ride quality so far on our flat hot roads! Thanks for the info!! I'm set at 23psi by my digital gauges and my TPMS registers one pound

    Bucco33! 08-10-2018, 09:59 AM Go to last post
    radismukes

    Testimony on using Lee H. Mann for Lehman parts!

    A Gentleman with an EXCELLANT REPUTATION!

    radismukes 08-08-2018, 10:24 PM Go to last post
    LeftWinger1940

    Appreciation

    Thanks again to Jim Murphy for his advice on driveshaft maintenance on my 1500

    trike/early Lehman conversion. I'm sure I'll have more questions

    LeftWinger1940 08-08-2018, 10:16 PM Go to last post
    CrystalPistol

    Lehman Monarch Trunk Lid

    Mine is not a Mon-II, mine is a GTL with two simple hinges and a latch, and when I bought it I was warned about hard rains or washing sprays. I fiddled

    CrystalPistol 08-08-2018, 10:02 PM Go to last post