Thank You Jack.... I was getting great fluid flow with my prior tests making me believe that it's "not" the check valve. I thought maybe it
Ray & Paula Yesterday, 10:18 AMThe residual check valve if bad should lock both rear brakes, however working with the proportioning valve could cause such a problem, also the brakes
Jack Klarich Yesterday, 09:56 AMGot delayed again.... Plus, I've been doing some more digging into the possibility of this issue being the Secondary Master Cylinder (SMC). That, along
Ray & Paula Yesterday, 09:18 AMThank You Jack.... I'll be sure she goes slow with the pedal. Before, I went full slow strokes on the pedal but, I'll go ahead and go with 1/2 as as you
Ray & Paula 09-15-2023, 01:14 PMHow does the brake fluid look?
If it is old, there could be sludge in the cylinder, also plugging the port, this happens whit the age of
You have a sound plan IMO
You have already bled the rear brakes several times so there should be plenty of new fluid already in the lines
OK...... I'm back. I had to play catch up on other things...LOL! I do have my new rear brake MC and plan on replacing the old one over the weekend. Other
Ray & Paula 09-15-2023, 08:46 AMI suggest the rotors may have become warped from overheating not apparent from just looking. Sad to say that is an expensive fix.
bikerbillone 09-15-2023, 06:33 AMI'd call Road Smith and get a knowledgeable answer
tourman 09-14-2023, 11:30 PMI recently purchased a 2002 Goldwing with a Roadsmith conversion. I am the third owner so I don't have all the history. The Roadsmith conversion has
Grandpot 09-14-2023, 08:19 PM
relink the rear brakes
Roadsmith sell a kit to relink the rear brakes that were disabled with pre 2016 builds. I purchased a kit and installed it this year for mine.It has made
John557 Yesterday, 08:15 PM