I have a 2010 trike and waiting for delivery of a Bushtec trailer. I have the Revco hitch. Anyone have a suggestion on the best plug and play wiring harness to use?<br />
<br />
Thanks<br />
<br />
Glenn
I have a 2010 trike and waiting for delivery of a Bushtec trailer. I have the Revco hitch. Anyone have a suggestion on the best plug and play wiring harness to use?<br />
<br />
Thanks<br />
<br />
Glenn
Buy the Rivco wiring harness and use their directions. Their directions are the best for our Tri Glides and are referred to by others for their complete directions with pictures.
I used the bushtec wiring setup, works a charm!! The Bushtec setup isolates so the trailer wiring is not wired off your bikes system. If something happens to trailer lights the bike lights will still work!
Ride Safe and Enjoy!
Bill & Sherry
1977-1986 United States Navy
I prefer the Harness from Ride Time technology
Ride Time Technology - Quick-Connect Accessory & Trailer Wiring Adapter
They also have a nice 5 wire to 4 wire harness.
[SIGPIC][/SIGPIC]
Steve TOI #285
____________________________
Stage One Download, Rinehart Slipons, Fuel Moto Breather kit, 2" pull back handlebars, 1 1/4" rear shock lift, FlashR side signal lighting, TourPak re-position kit, Rear sequential turn signals, Wide Windshield, Windshield trim, Floorboard extensions, Trailer hitch, etc etc etc
bushtec has a plug and play harness that worked fine on my Trike..
The Rivco set up works great -- just make sure you use the trailer isolator it will plug in after the 5 to 4 wire converter and then you just hook up your trailer plug
I found when I did my trailer hitch receptacle was the Kuryakyn trailer hitch receptacle #9183. It has the receptacle and a place for your safety chains to hitch to.
Works great!
Regards,
Rosy
From NH