Ok Folks
How hard would it be to paint the trike? Looking at red and black....or one or the other
Anyway open to suggestions....
Should I live the wood alone?
Should I just the the bike "as is"?
Ok Folks
How hard would it be to paint the trike? Looking at red and black....or one or the other
Anyway open to suggestions....
Should I live the wood alone?
Should I just the the bike "as is"?
Wow thats a personal taste question, but if were mine I would paint it. Green to match what you have?
Stallion #406 // 2013 Tri-Glide
99.9% of all the trikes are painted in some way.
Your trike is very different and classy.
I would NOT paint it.
Leave the wood natural---just make sure that it is protected by at least 3 coats of Spar Poly Urethane.
You can get it in Matte, Semi-gloss or High gloss.
If you want it to stand out even more, you can decide on a design that you like, decide where you want the designs and then apply the designs by wood-burning
(it's like a brand).
You have to sand the area where you want the designs, all the way to bare wood, do the wood-burning, then put on the Spar Urethane.
Something to think about.
Ride safe!!! Lots of idiots out there!!!
Paint the trim any color you want but the wood it too classy to paint.
Ride safe!!! Lots of idiots out there!!!
Thanks!