I ordered and recieved the lift kits. The local HD dealer did not want to even consider installing the brackets ... the service manager recommended a local trike builder ... I call them and they said to come on over ... the shop owner looked at the parts ... read the direction and then he and another guy made up their own plan to install the parts ... they did have a world class lift and used 4 jacks ... from the time they first looked at the instruction until they took it off the lift was 29 minutes ... well worth the half hour charge.
The machine looks much better ... I have read someone set their shock air pressure at 30 LBS and someone else said 40 LBS ... I set the pressure at 35 LBS ... I took it for a 325 mile ride Sunday and it was perfect ... the front end seemed to have a little more bit to it but that was a good thing ... one nice surprise, maybe ... I have been checking my fuel milage because a couple of weeks ago I replaced the stock pipes with V & H Duals to get rid of the cat ... also had it retuned so I wanted to check to see if there was a change in milage ... I noticed Sunday I got an extra 2 to 3 miles per gallon ... could it be with the machine sitting more level there is better air flow under the bike and less wind resistance ...