Hi, I see you've risen and maintained your motor trike ALOT. I have a question about leveling that your posts did not exactly cover.
My new to me 2003 spyder style with disc brakes (unknown version), original drive shaft (going to order a new one) and small trunk opening that used oem trunk release LEANS TO THE RIGHT about an inch.
However the wear on the front tire is more on the left side. Looking at the front of the trike, the whole thing seems to lean right. Additionally, we took our 1st 2up ride yesterday and the right rear sounds like it is bottoming out or hitting fender well on larger pot holes.
Should I follow direction to level ladder frame or body shell first?
Fyi heim joint move a little, but probably not the full amount desired.
Motor only had 50k miles, unknown trike miles. I also haven't found mfg tag yet.
Not figured out safe way to lift rear end yet to remove tires.
Thank in advance Bob
My new to me 2003 spyder style with disc brakes (unknown version), original drive shaft (going to order a new one) and small trunk opening that used oem trunk release LEANS TO THE RIGHT about an inch.
However the wear on the front tire is more on the left side. Looking at the front of the trike, the whole thing seems to lean right. Additionally, we took our 1st 2up ride yesterday and the right rear sounds like it is bottoming out or hitting fender well on larger pot holes.
Should I follow direction to level ladder frame or body shell first?
Fyi heim joint move a little, but probably not the full amount desired.
Motor only had 50k miles, unknown trike miles. I also haven't found mfg tag yet.
Not figured out safe way to lift rear end yet to remove tires.
Thank in advance Bob