Harley Sealed Bearing Service

Alot of folks may want to do their own bearing work at home

Many get confused on the tools needed, you can spend a ton of money on Jim's and HD tools, or you can try an inexpensive puller like this 1 from Harbor Freight. I am NOT saying it works 100 per cent of the time, I have had luck with a pilot puller similar to this ( being retired tech) I have all my own pullers and bearing splitters. To pull the bearings back in I have frozen them in the freezer, they will MOST times drop right in, if not a threaded rod, a socket just a bit smaller in diameter as the bearing, and a plate on the back side will push the bearings in the hub. Good Luck and save some money.

[IMG]https://s-media-cache-ak0.pinimg.com/originals/95/5b/16/955b163f70c7b2c6096feb7cbe523398.jpg[/IMG]

Here is a threaded rod pusher for installing

[IMG]https://shop.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_17892.jpg[/IMG] Pilot bearing puller from Harbor freight