i'am alittle concerned about the universal joint on drive shaft, grease is 12 years old, no fitting on joint, do I have to disassembly the joints to repack with new grease
Printable View
i'am alittle concerned about the universal joint on drive shaft, grease is 12 years old, no fitting on joint, do I have to disassembly the joints to repack with new grease
[size=3][B]The front u-joint is non-greaseable protected from the elements where the rear u-joint is pretty much exposed.
The rear u-joint has a zerk fitting and there is a zerk fitting on the dog-bone pivot at the swingarm as well.
Make sure each has plenty of grease.
Happy Trike Riding !!!!![/B][/SIZE]
[IMG]https://encrypted-tbn3.gstatic.com/shopping?q=tbn:ANd9GcSXrSINQEP0o5KJLEcrm5J-gzIbOc6IBnAhoUUw6vZKXpqs1lwYB6B_JGsome8j24F0fkWr41CcIg&usqp=CAE[/IMG]If you are in a pinch this will work if you are real careful
You can slip the needle point in the u joint dust boot cap and pump a bit of new grease in This adapter can be had for about 10 dollars at Harbor Freight
I have had 1 for years and still use it