Does anybody know the part number for the stock handle bar's ? I need 2 to 3 more inches of rise ( no jokes ) and need to know what the Harley book saids. Thanks Rick
Printable View
Does anybody know the part number for the stock handle bar's ? I need 2 to 3 more inches of rise ( no jokes ) and need to know what the Harley book saids. Thanks Rick
[QUOTE=rickm;436291]Does anybody know the part number for the stock handle bar's ? I need 2 to 3 more inches of rise ( no jokes ) and need to know what the Harley book saids. Thanks Rick[/QUOTE]
55800247
Gramp's are you sure of that number ? I can't find it in my catalog to get all the spec's.
Found this info on the web so take it with a grain of salt:
matt
Bar Diameter 1"
Width 32"
Pull Back 4.25"
Rise 12"
Base Width 11.5"
Knurl Width 3.06"
With those number's it a set of Heritage bars, look's like Harley doesn't make anything higher. I mean like a 14 inch rise.
To get that much of a rise you will have to look at ape bars 56942-10B
Check out krome werks 2+2 bars. They have a good selection with measurement images.
[QUOTE=rickm;436324]Gramp's are you sure of that number ? I can't find it in my catalog to get all the spec's.[/QUOTE]
I got that # from Ronnies Harley Davidson website. They have a parts list for each model. That # is for the OEM bar.
[QUOTE=rickm;436324]Gramp's are you sure of that number ? I can't find it in my catalog to get all the spec's.[/QUOTE]
55800247 is the Part Number Mancusso Harley Davidson in Houston gave me as the stock 2015 Freewheeler handlebars. It is listed on page 621 in the 2015 Harley Davison Parts and Accessories Catalog. The specs are:
1.0" dia, 32.0" width, 4.25" pull back, 12.0" rise, 11.5" base width, 3.06" knurl width, Stainless Steel.
Sunman
Thank you gentlemen, I think I'm going with the Khrome werks 2+2's. Part number 300519, now to check on any brake lines and wires. Anybody have any knowage of this ? Thanks Rick
[QUOTE=rickm;436589]Thank you gentlemen, I think I'm going with the Khrome werks 2+2's. Part number 300519, now to check on any brake lines and wires. Anybody have any knowage of this ? Thanks Rick[/QUOTE]
Maybe this thread might help.
[URL]http://www.triketalk.com/forum/threads/37383-Finished-up-a-lot-of-mods-on-15-freewheeler[/URL]
[QUOTE=rickm;436589]Thank you gentlemen, I think I'm going with the Khrome werks 2+2's. Part number 300519, now to check on any brake lines and wires. Anybody have any knowage of this ? Thanks Rick[/QUOTE]
This is 2021. I just got my 2015 FLRT in Dec. Even though the stock bars say 12" mini apes, I am needing at least 2 more inches of pull back.
Thought about these same bars, but Krome Werks web says they do not fit. Did you have problems? Donna