Re: Adjusting Stallion Headlight
[QUOTE=Mattel;3383]You would think adjusting the Strallion headlight would be easy, but it is a bit tricky. You need a 4mm socket with a short extention, a flashlight, and a very thin screwdriver.
There are three long adjustment threaded rod type screws on the headlight mounting plate. To adjust the light up or down you will need to move the top screw while holding the black plastic slotted piece that looks like a cone with slots in it. You will need to hold that slotted piece to keep it from spinning with the adjustment screw (this was the part that took me a while to figure out for myself). If you turn the adjustment screws without holding that plastic slotted cone like piece you will be just spinning the screw and scratching your head. Once you master that move, you will have an easy time making any adjustment you need to make. I found the left right bottom two adjustment screws can be adjusted with the hood down just sitting on the floor, but the top adjustment screw can only be adjusted with the hood up. I parked it in front of a brick wall and counted the bricks to see which way it was moving.
Good luck, let me know if you found this usefull.[/QUOTE]
I'm looking to change the bulbs making them both high/low beam
Paint code cross ref Orange paint
Has anyone done touch up on a Orange Stallion without buying it from USPaint. I need a pint
Front Caliper on Stallion Trike
Does anyone know the manufacture of the Stallion front brake caliper?