[ATTACH=CONFIG]102421[/ATTACH]Wires the flasher, Possible buyer came by this morning,:wave4:And ready the full 48 Volts, F-R, Speeds 1-2-3 wires, :pepper:
Printable View
[ATTACH=CONFIG]102421[/ATTACH]Wires the flasher, Possible buyer came by this morning,:wave4:And ready the full 48 Volts, F-R, Speeds 1-2-3 wires, :pepper:
:clapping::wave4:
[ATTACH=CONFIG]102444[/ATTACH]Buttoned up the J-Boxes, rear flasher lights work good and the horn is way to loud, :clapping:
[ATTACH=CONFIG]102467[/ATTACH]Charge Batts-[ATTACH=CONFIG]102468[/ATTACH]-More soon-er, :clapping:
Should be moving this week, then this thing will be going to a wiring pro, :gah:...
[ATTACH=CONFIG]107857[/ATTACH]Moving sucks, the plumbing, Ducts come apart, carport is still not enclosed, but the hell with it, TriPod is going in for the wiring fix this week,:clapping:
Sometimes things don't according to plan, such as the new house with many problems,:gah: and the wiring didn't turn out the way the instructions noted (Damn Chinese)[ATTACH=CONFIG]108981[/ATTACH]and the heat here in Riverside so I take it apart and move the electrics inside,[ATTACH=CONFIG]108982[/ATTACH]and with the help from YouTube wiring problems solved,:clapping:Bench Tested that is, now to put it back on the trike to find the mistakes...:confused:
[ATTACH=CONFIG]109020[/ATTACH]Color coded wires mixed up from controller to twist grip,:clapping:forward and reverse are mixed on the selector (minor fix):gah:then bolt down the engine+ chain and GO-GO, I hope...:Coffee:
Good 2 C U back at it, still following;)
Yep, still following you Tommy, taking shape at last.
[ATTACH=CONFIG]109034[/ATTACH]This is my so-called wiring from a pro, and I paid for this shit...:gah:
[QUOTE=TomyJ;894957][ATTACH=CONFIG]109034[/ATTACH]This is my so-called wiring from a pro, and I paid for this shit...:gah:[/QUOTE]
That is ugly from a pro, I would expect to see soldered joints with heat shrink @ the very least from a pro
The real pro is the man in the mirror....you will have to wire it yourself...
[ATTACH=CONFIG]109086[/ATTACH]Setting up the wiring now on the trike (note the batts). OK!:clapping:The wires were mixed from the controller to the throttle (Thanks China) AND!!! I found a local wiring/solder guy who helps restore old pin ball machines locally, How cool is that... After he fixes TriPod then he will do RebelRouser.
I am not destined to get the projects finished,:gah:The wiring guy's wife gave him covid, so I decided to do one of my "Honey Do's List" change the double side stairs for more room in the carport. :clapping:[ATTACH=CONFIG]109249[/ATTACH]:Coffee:
[ATTACH=CONFIG]109827[/ATTACH]Batteries rewire, Still at it, a little at a time...:gah:
MockUp again! DAMN!:gah: Most of the wiring is straightened out BUT when the motor is engaged the diamond plate moves up or down, not enough support/bracing for the motor mount plate, so back to the drawing board for more bracing...:Shrug:[ATTACH=CONFIG]109965[/ATTACH][ATTACH=CONFIG]109966[/ATTACH][ATTACH=CONFIG]109967[/ATTACH]...
[ATTACH=CONFIG]110178[/ATTACH]-[ATTACH=CONFIG]110179[/ATTACH]Do you think these added braces will stop the flex? EDIT: Have to order the aluminum from eBay, not a large supply here in Hemet Ca.
Yes, nice job with the fab and welding:clapping:
[ATTACH=CONFIG]110345[/ATTACH]The welder said this is over kill, I hope he's right. :clapping: