The right front bearing cover came off of my Stallion on the way to the 3 Wheel Rally. I’m here in Spearfish hoping an auto mechanic can fix the Trike. Hate to say this but, every motorcycle place could not help. Fingers are crossed,
Printable View
The right front bearing cover came off of my Stallion on the way to the 3 Wheel Rally. I’m here in Spearfish hoping an auto mechanic can fix the Trike. Hate to say this but, every motorcycle place could not help. Fingers are crossed,
Good Luck, Might try a Ford Place, I believe it's a Ranger power plant.
Most of the front end is Ford so any mechanic be able to work on it 🙏
did just the cover come off? does the seal look ok, if it is not spewing grease around it is probably ok. it is just a cover held on by allen screw. paul the tt coridnator in deadwood had his stallion worked on in spearfish but I don't know where. give him a call or see him at tt headquarters
good luck
Dragon
The dust cover on both sides of the axle are just that! You should see a nut with a carter pin through it which has a washer behind it and behind that is the seal for the axle and bearing. Both sides are the same. So if all is missing is the dust cover, ride on, you don't have any issue. Tomg
Good morning
you might give outdoor motorsports a call 3245 e colorado blvd 605-642-7731 opeans at 9am hope this helps
Dragon
Call Pmar. (Paul) 605-520-7570 He is at the rally. His Stallion broke down last year or year before. He got a shop in Spearfish to tow it in & fix it... He is leading the TT TOI rides.
I should further clarify that the swing arm is against the seal and caliper bracket which has the outer and inner grease seal as wel as the bearing. The outer cover is only a decorative cover for the axle nut and end of the axle. I have known many who were missing both axle covers. Tomg
Good evening
was any of this helpful did you get going again. hope so too many things to miss
Dragon:Shrug:
Ditto Dragon's comment. I am of Paul Harvey vintage. I want to hear the rest of the story. Me thinks you just lost a dust cap. I did the locktite treatment to mine years ago.