Adjusting Handlebars on Freewheeler

I need to adjust the handlebars. How do I get to the handlebar clamps?

Thanks,

Sunman

I PM'd you.

[QUOTE=Sunman;276582]I need to adjust the handlebars. How do I get to the handlebar clamps?

Thanks,

Sunman[/QUOTE]

Should get you close. Front bolt through the headlight nasal probably isn't there

[video=youtube_share;kXDRUzDeZ9w]https://youtu.be/kXDRUzDeZ9w[/video]

I just did mine, lift the black cover piece that surrounds the front fork lock. A knife or thin screw driver will gently pry it up. There are two access holes that line up with two of the four top clamp bolts. Use a long Allen wrench and loosen the two. This will loosen the bars enough to move them where you want them.

[QUOTE=spowell928;276906]I just did mine, lift the black cover piece that surrounds the front fork lock. A knife or thin screw driver will gently pry it up. There are two access holes that line up with two of the four top clamp bolts. Use a long Allen wrench and loosen the two. This will loosen the bars enough to move them where you want them.[/QUOTE]

Thanks. Will give it a try.

Sunman

I PM'd you ~ I'll send you the pages as soon as I get your e-mail address

[QUOTE=0pini0nated;276980]I PM'd you ~ I'll send you the pages as soon as I get your e-mail address[/QUOTE]

Thanks but I got it done. The tip from spowell928 worked perfectly. Took about 3 minutes to adjust the bars.

Thanks again.

Sunman

[QUOTE=Sunman;276582]I need to adjust the handlebars. How do I get to the handlebar

Thanks,

Sunman[/QUOTE]

how did you get the cover off of the switch?

[QUOTE=Huck1949;832283]how did you get the cover off of the switch?[/QUOTE]

You can pry it off with a fingernail.