I want to 'll do a stage 2 on my 2016 freewheeler, if you can advise me I would be grateful. What is the best torque cam to buy. Will anything else need to be updated and what is the approximate cost if done by a dealer.
Printable View
I want to 'll do a stage 2 on my 2016 freewheeler, if you can advise me I would be grateful. What is the best torque cam to buy. Will anything else need to be updated and what is the approximate cost if done by a dealer.
[QUOTE=2ndheart;711624]I want to 'll do a stage 2 on my 2016 freewheeler, if you can advise me I would be grateful. What is the best torque cam to buy. Will anything else need to be updated and what is the approximate cost if done by a dealer.[/QUOTE]
Hello my friend. Hopefully Jack will chime in here, as he has had a twin cam FW.
In general, I feel you can't go wrong with S&S.
[url]https://www.fuelmotousa.com/series-221027-ss-cycle-harley-davidson-camshafts.html[/url]
Here would be my choice, I would have crank run out checked first before doing any work
[URL]https://www.sscycle.com/4-steps/step-2-cams-and-pushrods[/URL]
[QUOTE=Jack Klarich;711728]Here would be my choice, I would have crank run out checked first before doing any work
[URL]https://www.sscycle.com/4-steps/step-2-cams-and-pushrods[/URL][/QUOTE]
Jack, I have a question, everything listed is for 2013 or older. Where are the cams listed for the last few years of the TC?
[QUOTE=MDO;711758]Jack, I have a question, everything listed is for 2013 or older. Where are the cams listed for the last few years of the TC?[/QUOTE]
Here
[url]https://www.sscycle.com/easy-start-cams/[/url]
I was told the 2016 FW engine came with an upgraded cam. Due to being a trike.
Was this wrong info!
If yes, so an upgraded cam is int the stage 2?
Thanks
[QUOTE=Mcmister;711798]I was told the 2016 FW engine came with an upgraded cam. Due to being a trike.
Was this wrong info!
If yes, so an upgraded cam is int the stage 2?
Thanks[/QUOTE]
Same cams are in a Roadking Model, nuthin super about them I can see
All 2014 - 2016 had updated camshafts, this the designation 103ho. A performance cam for the trike is not listed for 2014+ twin cams. I am not sure what cam would work for a stage 2 update, maybe if someone has done a stage 2 on a Rushmore trike they could give me a heads up.
My HD dealer “”specialist” told me “you already have the Rushmore cam. No need to further upgrade cam. Next upgrade would be larger pistons, etc”
My stage 1 was/is very worthwhile
HD FW 2016