-
ignition wiring
OK, well i have rewired the trike, fitted relay to all circuits and have a six way fuse rack,lights, horn, flasher, hazards, all LED lights in the display panel works fine.
The fly in the ointment is the ignition, i have electronic ignition but have put points back is to try and get it to work. I have 12v at the positive on the coil , the negative side it earthed but still i have no spark.
Can someone supply a really simple diagram showing battery, coil, point and condenser wiring. I can't see the wood for the trees, i am obviously missing something really basic buy its pissing me off.
I have renewed the cap. HT leads and rotor.
when i took it off the road it was running fine so it is something i have done or not done but i am dammed if i know what.
I feel real stupid that something simple ss beating me. I have done this many times in the past it makes me mad.
-
this is my first run diagram
for some reason I cant add a Pic to the post
check out ThumbUpthe links
[URL]http://www.3fowlers.com/images/photos/manual/first%20start.jpg[/URL][URL="http://www.3fowlers.com/images/photos/manual/first%20start.jpg"]
[url]http://www.3fowlers.com/manual.html[/url]
[/URL]
-
As with Fowler's diagrams, the ignition on power runs to the + side of the coil. Then - side of the coil runs to the condenser wire or the ignition post on the distributor.
-
Bit late with this as my email stopped syncing for some reason.
My problem was of my own making, I had a wire going to earth when there should not have been.