Lehman Trike Swingarm Monarch II (reconditioned) ready to use

[SIZE=2][FONT=Arial][FONT=Comic Sans MS]LEHMAN TRIKE MONARCH II SWING ARM THAT HAS BEEN COMPLETELY RECONDITIONED.[/FONT][/FONT]

[FONT=Arial][FONT=Comic Sans MS]PROFESSIONALLY REPAIRED BY A CERTIFIED FABRICATING WELDING SHOP TO ORIGINAL FACTORY MEASUREMENTS.[/FONT][/FONT]

[FONT=Arial][FONT=Comic Sans MS]ALL OF THE ORIGINAL FACTORY DEFECTS HAVE BEEN IDENTIFIED AND ADDRESSED SO THAT THIS SWING ARM IS BETTER AND STRONGER THAN IT EVER WAS NEW.[/FONT][/FONT]

[FONT=Arial][FONT=Comic Sans MS]PLACED ON A FACTORY STYLE JIG FOR CONFORMITY.[/FONT][/FONT]

[FONT=Arial][FONT=Comic Sans MS]I BOUGHT THIS SWING ARM FROM AN UN-WRECKED, UNDAMAGED KIT BECAUSE RIDER WANTED INDEPENDENT SUSPENSION.[/FONT][/FONT]

[FONT=Arial][FONT=Comic Sans MS]OVER 11 HOURS WENT INTO THE REPAIR, SO I DOUBT I WILL EVER CONSIDER DOING ANOTHER.[/FONT][/FONT]

[FONT=Arial][FONT=Comic Sans MS]THIS SWING ARM IS READY TO INSTALL AND INCLUDES NEW LB6301 ISO BUSHINGS, SLEEVES AND FRONT DRIVESHAFT BOOT.[/FONT][/FONT]

[/SIZE][SIZE=3][FONT=Arial][SIZE=3][FONT=Comic Sans MS][SIZE=2]SHIPS FREE TO LOWER 48 STATES ONLY.[/SIZE]

[ATTACH=CONFIG]98232[/ATTACH]

[ATTACH=CONFIG]98233[/ATTACH]

[ATTACH=CONFIG]98234[/ATTACH]

[/FONT][/SIZE][/FONT][/SIZE][SIZE=2][FONT=Arial][FONT=Comic Sans MS]IF [/FONT][/FONT][/SIZE][SIZE=3][FONT=Arial][SIZE=3][FONT=Comic Sans MS][SIZE=2]YOU HAVE A CRACKED SWING ARM ON YOUR LEHMAN MONARCH II STRAIGHT AXLE TRIKE CONVERSION WHERE THE KIT WAS MANUFACTURED BETWEEN 2004-2012, THIS IS YOUR QUICK TICKET OUT OF DESPAIR.

IT IS LISTED ON eBAY FOR $1795.00 BUT T/T MEMBERS GET IT FOR $1550.00.[/SIZE]

contact me at [URL="http://www.mjtrikes.com"]www.mjtrikes.com[/URL]

[/FONT][/SIZE][/FONT][/SIZE]

Hi Lee, I just bought a 2004 goldwing trike with a Lehman Monarch 2 conversion. The swing arm isolator bushings are totally deteriorated. Trying to figure out how is the best and easiest way to get in there to replace the bushings. Do I need to take the body off or just the tires or what? plus I need to figure out what parts I need and where to find them.

[QUOTE=skeet;875910]Hi Lee, I just bought a 2004 goldwing trike with a Lehman Monarch 2 conversion. The swing arm isolator bushings are totally deteriorated. Trying to figure out how is the best and easiest way to get in there to replace the bushings. Do I need to take the body off or just the tires or what? plus I need to figure out what parts I need and where to find them.[/QUOTE]

William sorry to say but Lee passed away last year maybe somebody else will have some information for you about your Lehman conversion..

William. I have a 2005 that had the same thing with the bushings.

It was more then I wanted to tackle so I took mine in. Gene's Gallery in Springfield Mo

He said it was a big job. Tires, Mufflers, Drive shaft, Stabilizer arm. He said the new bushings were a little oversized and had to use a lot of lube and clamps to get them in place.

[QUOTE=Fixin2;876210]William. I have a 2005 that had the same thing with the bushings.

It was more then I wanted to tackle so I took mine in. Gene's Gallery in Springfield Mo

He said it was a big job. Tires, Mufflers, Drive shaft, Stabilizer arm. He said the new bushings were a little oversized and had to use a lot of lube and clamps to get them in place.[/QUOTE]

I have the same issue. Does anyone know where I can get the bushings (LB6301)? In the shop now, but they can't find the bushings.

[QUOTE=Bobeuchre0;879042]I have the same issue. Does anyone know where I can get the bushings (LB6301)? In the shop now, but they can't find the bushings.[/QUOTE]

Bob.......Welcome to Trike-Talk........:wave4::wave4:..

[URL="https://www.ebay.com/itm/403146647170"]LB6301 LEHMAN TRIKE MONARCH II SWINGARM ISOLATOR BUSHINGS - SET OF FOUR | eBay[/URL]