Stallion U-Joint

A reminder to check and grease the U-Joint periodically.

[ATTACH=CONFIG]39114[/ATTACH]

Ouch!! Hopefully it wasn't too difficult getting that sucker out. Did it leave you stranded Dean?

Get-er fixed and get out there!! :xszpv::xszpv:

[QUOTE=Gold Rush;385230]Ouch!! Hopefully it wasn't too difficult getting that sucker out. Did it leave you stranded Dean?

Get-er fixed and get out there!! :xszpv::xszpv:[/QUOTE]

I was coming home from a rally traveling 75-80 mph. I started to feel a vibration thru the gas pedal and when I slowed down to stop for gas I could [B]then[/B] hear the screeching sound. I limped it home and all fixed today. Easy to unbolt the u joints. It a ordinary joint so easy to find.

The real issue is trying to get grease in the joint. Very hard to get onto the fitting if you even due.

I recently tried to grease my U-joints. I could not get the grease gun on the zerk. It just would not quite line up so I could. Have others had this issue? Maybe a different angled zerk or a skinny gun nozzle, if there is such a thing.

John in Olney, TX

White Stallion #142

[QUOTE=Ployboy;385244]I recently tried to grease my U-joints. I could not get the grease gun on the zerk. It just would not quite line up so I could. Have others had this issue? Maybe a different angled zerk or a skinny gun nozzle, if there is such a thing.

John in Olney, TX

White Stallion #142[/QUOTE]

It appears a needle nozzle is needed:

[video=youtube_share;zd31gzEV_E0]https://youtu.be/zd31gzEV_E0[/video]

Dean, thanks for that video. I'll get a needle injector for my gun.

John

[QUOTE=Dean H;385223]A reminder to check and grease the U-Joint periodically.

[ATTACH=CONFIG]39114[/ATTACH][/QUOTE]

Dean whats your milage now ?

I have lubed mine twice in 56K. I put the bike on ramps, then jack one wheel clear so that I can rotate it and get a clear shot on each fitting. I have one of those injectors, but I was able to get on it with a standard grease fitting. I use the Ford long life grease.

Disconnected the drive shaft and greased mine yesterday.
Tomg

Greased the U-Joint with the injector and it worked great. I wish everything worked that easy.ThumbUp

[QUOTE=Ed Hobgood;390386]Greased the U-Joint with the injector and it worked great. I wish everything worked that easy.ThumbUp[/QUOTE]

Ed can you please post a picture of the "injector" that you used. I've yet to find one to work for me.

Ted, I got the injector at O'Reilly and the item number is PFM W54216 and it cost $7.99 I'm trying to send a picture but for some reason I've not been able to get it to download (to big).[ATTACH=CONFIG]39837[/ATTACH]

How's the weather for you guys down there?

Thanks ED Looks like just some wind for right now unless it turns.