If your on the fence about a rider backrest or want to save $$$ on one.

Printable View

03-22-2018, 03:06 PM
FuzzyWuzHe

2 Attachment(s)

If your on the fence about a rider backrest or want to save $$$ on one.

So I wanted a back rest for my Ultra, but, really didn't want to spend $200 for the HD one plus $40 something for the mounting.

I was looking on eBay for a good used one, with bracket and came across this:

[URL]https://www.ebay.com/itm/Detachable-Rider-Backrest-For-Harley-Electra-Glide-Ultra-Limited-FLHTK-2009-2014/322147479605?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649[/URL]

Some disclaimers:

Says it's located in Kentucky, but, actually comes from China ... wheew, just beat the tariffs.

Takes about two weeks to get here.

Review:

Seems of decent quality. Looks like they bought a HD one and copied it. Mine was missing all the hardware and instructions. Here's what I got:

[ATTACH=CONFIG]55761[/ATTACH]

My old Tri back rest, had a bad spring, so I took the spring to a hardware store and bought two a little heavier. I still had one, so, just found some 1/4" bolts and nylock nuts and installed it.

Here it is installed:

[ATTACH=CONFIG]55762[/ATTACH]

I took the pic at a bad angle, makes it look crooked, it's not. I'm a big guy, and I can lean back pretty heavy on it. I think for the 65$ including shipping, it was a good deal. Time will tell, but it is good for now.
03-22-2018, 07:46 PM
NC Triker

Back Rest

Their website says this does not fit a trike. Glad it worked for you but for the rest of us???
03-22-2018, 08:09 PM
67wizard

Check page 8 & 9 says it fits 13 - 16 Trikes.
03-22-2018, 08:14 PM
FuzzyWuzHe

This bracket looks just like the HD bracket that HD used to say wouldn't fit the trike ... and it did. I would bet money this one will fit a tri.
10-13-2018, 06:45 PM
TonkaDriver

No Instructions

Fuzzy, Do you have any photos of how the bracket is installed. They don't include any instructions when shipped and I couldn't find any online.

Thanks in advance,

Kurt
10-13-2018, 09:37 PM
FuzzyWuzHe

1 Attachment(s)

[QUOTE=TonkaDriver;618107]Fuzzy, Do you have any photos of how the bracket is installed. They don't include any instructions when shipped and I couldn't find any online.

Thanks in advance,

Kurt[/QUOTE]

It's mounted exactly like the HD one ... go to the HD web site and download the pdf from there .... tried to attach it below ... not sure it worked

Basically, the mount bolts to the two passenger handhold mounting bolts, then the L bracket bolts to one of the brackets above the battery ... you'll need to play with which of the mounting bolts on the bracket to see which set lines up with the seat slot.

[ATTACH]62801[/ATTACH]
11-29-2018, 08:49 PM
DDubya

My buddy put one on his Road King and likes it.
11-30-2018, 11:43 AM
DK Custom Products

Or if you want to save money AND get one made in the USA, check these out-

[url]http://www.grasshopperlimited.com/harley-davidson-touring-models/[/url]

I've had a backrest from these folks on my Softail for 4-5 years and have been very pleased with it.

On my TG I have an older Harley model backrest, but if I needed a new one, I would look at these.

Besides the good price, and being made in the USA, they also have a pocket for the passenger in the back of the backrest.

Kevin
11-30-2018, 12:50 PM
MDO

[QUOTE=DK Custom Products;630668]Or if you want to save money AND get one made in the USA, check these out-

[URL]http://www.grasshopperlimited.com/harley-davidson-touring-models/[/URL]

I've had a backrest from these folks on my Softail for 4-5 years and have been very pleased with it.

On my TG I have an older Harley model backrest, but if I needed a new one, I would look at these.

Besides the good price, and being made in the USA, they also have a pocket for the passenger in the back of the backrest.

Kevin[/QUOTE]

Thanks a lot Kevin for the tip.

I just contacted grasshopper limited to confirm the correct model for my 17 Freewheeler with a HD Sundowner seat. It has the slot for the backrest. I don't need the pocket on back & that saves $15.

Also, they have 10% off till the end of the year.:cool: That savings covers most of the shipping.
11-30-2018, 09:51 PM
DK Custom Products

[QUOTE=MDO;630689]Thanks a lot Kevin for the tip.

I just contacted grasshopper limited to confirm the correct model for my 17 Freewheeler with a HD Sundowner seat. It has the slot for the backrest. I don't need the pocket on back & that saves $15.

Also, they have 10% off till the end of the year.:cool: That savings covers most of the shipping.[/QUOTE]

Cool, glad they had one for you! :clapping:

Kevin