Normal line of site warning lights, no looking down!

This seems to me like something many folks would use a lot. [IMG]https://www.vtxcafe.com/images/smilies/cheers.gif[/IMG]

I really don’t want to strip and tap into the wires as I can see this would be the easy way, but, using connectors to tap into the existing wiring connectors would be the right way to do it though.

So ask you, has one of you preformed this on your Honda [B]VTX or other make,[/B] can you pass on your secrets. [IMG]https://www.vtxcafe.com/images/newstuff/1.gif[/IMG]

Photos as well as information would be a real plus. Thanks ahead of time, [IMG]https://www.vtxcafe.com/images/newstuff/glee.gif[/IMG]



David Hilton

Ret. USN ETC/SS

[QUOTE=SubDude;630963]This seems to me like something many folks would use a lot. [IMG]https://www.vtxcafe.com/images/smilies/cheers.gif[/IMG]

I really don’t want to strip and tap into the wires as I can see this would be the easy way, but, using connectors to tap into the existing wiring connectors would be the right way to do it though.

So ask you, has one of you preformed this on your Honda [B]VTX or other make,[/B] can you pass on your secrets. [IMG]https://www.vtxcafe.com/images/newstuff/1.gif[/IMG]

Photos as well as information would be a real plus. Thanks ahead of time, [IMG]https://www.vtxcafe.com/images/newstuff/glee.gif[/IMG]



David Hilton

Ret. USN ETC/SS[/QUOTE]

Heads up display .....The auto industry tried that once , It never went over big...:Shrug:

[QUOTE=SubDude;630963]This seems to me like something many folks would use a lot. [IMG]https://www.vtxcafe.com/images/smilies/cheers.gif[/IMG]

I really don’t want to strip and tap into the wires as I can see this would be the easy way, but, using connectors to tap into the existing wiring connectors would be the right way to do it though.

So ask you, has one of you preformed this on your Honda [B]VTX or other make,[/B] can you pass on your secrets. [IMG]https://www.vtxcafe.com/images/newstuff/1.gif[/IMG]

Photos as well as information would be a real plus. Thanks ahead of time, [IMG]https://www.vtxcafe.com/images/newstuff/glee.gif[/IMG]



David Hilton

Ret. USN ETC/SS[/QUOTE]

I've never done this mod on a ride, but it's a great idea. I've always thought that a heads up display thing on a bike would awesome. Guessing they are too pricy to put on a bike. This is one of the things I've always liked about the big touring bikes (Harley Ultra Glide, Honda GL1800's and the BMW K1200LT), they have pretty large warning lights that get your attention.

If I was to do this type mod, I would splice to the feed, solder, dielectric grease and then heat shrink the whole connection. I've used this method lots on splices and repairs with good success.

Dang .. why am I giving you advice ... you where an ET ... you probably know better than I ... :D ... I was just a grease monkey.

[QUOTE=rhino 2;630978]Heads up display .....The auto industry tried that once , It never went over big...:Shrug:[/QUOTE]

I drove a GM product that had it. I loved it. Too bad it went by the wayside.