Wet bolt for Voyager

[h=2]"Wet" bolt for Voyager[/h][COLOR=#333333][INDENT]I have just spent the entire day surfing the internet trying to find the zerk fitted "wet" 1/2 in bolt that runs through the bushing on the suspension fork! They don't exist. Some company had to make them because I have two of them on my desk, and one is completely WORN out. I tried EVERY nut and bolt place I could locate, dream of, make up, or imagine! They are for naught! I was going to try some boat trailer spring leaf bolts and bushings. This is all well and good by they only come in 9/16" id and 3 inch length. My bolt is 1/2 inch and 2 1/4 inches long. In addition, the bushing is only 1.0 inch long. The shortest I could locate were 1.75 inches. Don't call Voyager.....they just don't respond and don't sell any [B]parts[/B]!

You can get a whole new fork assembly if you want, but there ain't no stinking [U][I][B]PARTS [/B][/I][/U]:mad:[U][I][B]![/B][/I][/U] I could drill out the forks from 1/2 to 9/16 and use a 9/16 wet bolt, but they are all still way too long. I could cut the 9/16 bolt off, have it re-threaded and cut the bushing to fit. $$$$$$. This is way too complicated, time consuming and expensive just to replace a bolt and a bushing. [U]Any one have any suggestions?

[/U]OLDVETERAN :(:Shrug::gah:[/INDENT]

[/COLOR]

I remembered my old Chicago Hardware Company - McMaster Carr... Hope this helps... They list one that is 2 13/16" - might work???

[URL]https://www.mcmaster.com/#grease-bolts/=17zj2xs[/URL]

Les

[QUOTE=dadztoy;472383]I remembered my old Chicago Hardware Company - McMaster Carr... Hope this helps... They list one that is 2 13/16" - might work???

[URL]https://www.mcmaster.com/#grease-bolts/=17zj2xs[/URL]

Les[/QUOTE] Thanks I'll giv them a try.