Cnc water jet.
Some more machine work to go.
Probably all be done on manual knee mill unless I decide on something fancy.
Printable View
Cnc water jet.
Some more machine work to go.
Probably all be done on manual knee mill unless I decide on something fancy.
Added up all the numbers. Looks like my pistons are gonna be out the top of the hole by .220".
So making some big spacers for the jugs.
Cut and ground.
Cleaned up at .241"
[ATTACH=CONFIG]47720[/ATTACH]
ThumbUp Amazing what a man will put himself through to get more HP , as a x trucker I know the need for more HP . :D:D
Did a little machine shop time after work.
Front end spring link pieces.
[ATTACH=CONFIG]47727[/ATTACH]
[COLOR="silver"][SIZE=1]- - - Updated - - -[/SIZE][/COLOR]
Cylinders and pistons came in today.
[ATTACH=CONFIG]47728[/ATTACH]
[ATTACH=CONFIG]47729[/ATTACH]
[COLOR="silver"][SIZE=1]- - - Updated - - -[/SIZE][/COLOR]
Anybody need?
Eagle 2241 cam used
Eagle 2246 cam used
Empi lube a lobe lifters new
Empi 1.25 ratio rockers used
Four SS 35.5 valves new
Four 35.5 valve seats new
Looking to get 1.4 ratio rockers for the new build.
ThumbUp Saving yourself a lot of extra upkeep , work , with those grease inserts ,,,nice job Rex !!!! ThumbUp
Mmmmm cam.
Is there such a thing as too much?
[ATTACH=CONFIG]47730[/ATTACH]
As a owner operator trucker and a lover of HOT RODS I'd have to say ,,,,NAAAAA :D
Well I did go a few steps larger than most people do on the street. Thinking I can get away with it.
Case is bored for the 94's
[ATTACH=CONFIG]47733[/ATTACH]
[COLOR="silver"][SIZE=1]- - - Updated - - -[/SIZE][/COLOR]
With the spacers.
[ATTACH=CONFIG]47732[/ATTACH]
[COLOR="silver"][SIZE=1]- - - Updated - - -[/SIZE][/COLOR]
First mock up of the front end.
[ATTACH=CONFIG]47731[/ATTACH]
ThumbUpThumbUp,,,Front end looks great Rex ,[U] ThumbUpThumbUp . Do you think that's enough recoil with one shock ?[/U]