-
6 Attachment(s)
[QUOTE=tntrike03;349502]Hi Ozarkryder, Could you please post a picture of your RAM Mounts showing your GPS, Phone & Drink Holder. I am just starting to look for something to mount my on my 03 Goldwing Trike?
Thanks in advance[/QUOTE]
Smaller picture is the original cup holder with a single 1" ("B" size) ball brake/clutch clamp RAM mount and a Moto Fizz cup holder. Big picture is the current holder I madebfor a Bubba 24 oz Hero Sport Bottle with the same RAM products.
[ATTACH=CONFIG]34287[/ATTACH][ATTACH=CONFIG]34288[/ATTACH]
I originally put a RAM ball on the underside of the armrest, used a medium arm again and a "B" size ball on a BCS cup holder. Bigger picture is the current RAM clamp on the grab handle after Gloria had me take off the armrests , medium arm and another home made holder for a Bubba bottle.
[ATTACH=CONFIG]34289[/ATTACH][ATTACH=CONFIG]34290[/ATTACH]
Here is the GPS holder and the phone holder on a double ball clutch/brake mount on the left handlebar. The GPS and phone mounts are from RAM, I use a medium arm on the GPS and a short arm on the phone holder.
[ATTACH=CONFIG]34291[/ATTACH][ATTACH=CONFIG]34292[/ATTACH]
RAM webside has an amazingly large selection of products: [URL]http://www.rammount.com/[/URL]
If I can't find what I need locally (I rarely can, not many RAM dealers in our area) I used to go through Express Mounts, but now I use GPS City. They are the same company, the prices are usually the same, they take the same credit cards, but GPS city takes PayPal while Express Mounts doesn't.
-
A few of the best thing I have done are a tuner, floor board extensions, T-Glide lifts & 2+2 handle bars, & I made a wood bead seat cover.
-
[QUOTE=Ozarkryder;349581]Smaller picture is the original cup holder with a single 1" ("B" size) ball brake/clutch clamp RAM mount and a Moto Fizz cup holder. Big picture is the current holder I madebfor a Bubba 24 oz Hero Sport Bottle with the same RAM products.
[ATTACH=CONFIG]34287[/ATTACH][ATTACH=CONFIG]34288[/ATTACH]
I originally put a RAM ball on the underside of the armrest, used a medium arm again and a "B" size ball on a BCS cup holder. Bigger picture is the current RAM clamp on the grab handle after Gloria had me take off the armrests , medium arm and another home made holder for a Bubba bottle.
[ATTACH=CONFIG]34289[/ATTACH][ATTACH=CONFIG]34290[/ATTACH]
Here is the GPS holder and the phone holder on a double ball clutch/brake mount on the left handlebar. The GPS and phone mounts are from RAM, I use a medium arm on the GPS and a short arm on the phone holder.
[ATTACH=CONFIG]34291[/ATTACH][ATTACH=CONFIG]34292[/ATTACH]
RAM webside has an amazingly large selection of products: [URL]http://www.rammount.com/[/URL]
If I can't find what I need locally (I rarely can, not many RAM dealers in our area) I used to go through Express Mounts, but now I use GPS City. They are the same company, the prices are usually the same, they take the same credit cards, but GPS city takes PayPal while Express Mounts doesn't.[/QUOTE]
Ram mounts for everything! Do they make a nut-cup holder with swedish massage?
-
[QUOTE=Bazooka;350479]Ram mounts for everything! Do they make a nut-cup holder with swedish massage?[/QUOTE]
No nut holders, and as Gloria is German, no Swedish massage, but the 2 bikes and 2 trikes all got balls.;)
-
-
Most of maany
[QUOTE=Bazooka;349110]What is the best mod you did to your trike? If you have more than one that you really like, then name the top two or three in order of 1st, 2nd and 3rd and what you like about each one. This can be a modification, a tuner, paint job, handlebar, engine upgrade, accessory etc.
Also, post your trike info first, example:
Harley Ultra Hannigan Conversion
or
Honda GL1800 Roadsmith Conversion
or
Harley Tri-Glide[/QUOTE]
1- I :pepper::pepper:got a trigg for my VTX 1800
2- 6 degree rake from Randy
3- and the list goes on and on
-
Best mods?
Zook's 6 degree rake with alls balls
Fork brace
Baker wings
-
Have done so much to it hard to say, but really like the 2 in tank lift a lot. Looks better and runs cooler too.
-
'08 Special Construction, "Bug Bike"
1.) Replaced the front end with one having a shorter offset. Eliminated understeer completely.
2.) Replaced pegs with floor boards and raised the seat. Much improved comfort and ride.
3.) Installed a hydraulic clutch. Much easier to operate.
Godspeed and ride safe!
-
1. Mic-O-Pegs
2. Trike Wings
3. Avon Trike tire