-
[QUOTE=Scott1;732951]Well I tried on the Kuryakyn 7214 Side Flairs using some spring clamps and I found that they [U][B]do not fit[/B][/U] my [U][B]2002 Lehman Predator Trike[/B][/U]. [COLOR=#b22222][B]… etc … [/B][/COLOR]returning the Kury 7214 fender flairs to Amazon do to not fitting.
Greg[/QUOTE][B]I'm sorry,[/B] I hope I didn't lead anyone down a path to disappointment. [B]I do appreciate the picture & info.[/B] Being your trike is black, I think it still looks[B] good[/B], but then if something don't look right "to me on mine", it bothers me whether anyone else sees it or not.
On mine, the rear "flared" part would be behind the faux bumper / light bar end anyway. I might try them still, [B]gonna study the pics closely[/B]. I might be able to "rotate" them towards the front?
-
[QUOTE=CrystalPistol;733071][B]I'm sorry,[/B] I hope I didn't lead anyone down a path to disappointment. [B]I do appreciate the picture & info.[/B] Being your trike is black, I think it still looks[B] good[/B], but then if something don't look right "to me on mine", it bothers me whether anyone else sees it or not.
On mine, the rear "flared" part would be behind the faux bumper / light bar end anyway. I might try them still, [B]gonna study the pics closely[/B]. I might be able to "rotate" them towards the front?[/QUOTE]
I thought they were to short for my liking and you could mod the rear piece by cutting off the under lip about 2" long and rotate it forward a little.
I traced the left side on paper, both pieces, as shown in the picture. If you want I will send it to you by mail and you can see the 2 parts and you could even cut them out to see how they would fit. Send your mailing address to deleted (my spam address) and I will put it in the US mail.
Greg
-
Message sent …. [size=3][COLOR=#008000][FONT=comic sans ms][I][B]THANK YOU SIR![/B][/I][/FONT][/COLOR][/SIZE]
-
[QUOTE=CrystalPistol;733183]Message sent …. [size=3][COLOR=#008000][FONT=comic sans ms][I][B]THANK YOU SIR![/B][/I][/FONT][/COLOR][/SIZE][/QUOTE]
Your welcome.
Check your mail in a couple days. I sent you a email and I will mail the tracings on Tuesday.
Greg
-
[QUOTE=Scott1;733218]Your welcome.
Check your mail in a couple days. I sent you a email and I will mail the tracings on Tuesday.
Greg[/QUOTE]They come today … [SIZE=3][FONT=century gothic][I][B]Thanks again! [/B][/I][/FONT][/SIZE]
I got busy and didn't get to "test" them today after the mail ran as I took wife out for Applebee's supper & Lowe's lumber run.
-
[QUOTE=CrystalPistol;734216]They come today … [SIZE=3][FONT=century gothic][I][B]Thanks again! [/B][/I][/FONT][/SIZE]
I got busy and didn't get to "test" them today after the mail ran as I took wife out for Applebee's supper & Lowe's lumber run.[/QUOTE]
Got to keep the better half happy. I went to Home Depot yesterday to get 3 stainless steel screws, 6mm 2" long and 1 pack of SS. washers (6), and it cost $6.72, OUCH :(. Needed to cut off the heads and make them into studs so I could install some safety chrome held in place with cap nuts.
Enjoy the drawings, Greg
-
1 Attachment(s)
[B]I know [/B]about the prices on individual SS bits & pieces, but they look good polished. I use some old cookie tins for storing left over pieces, the collection grows. [B]
Looked[/B] at those tracings today,[B] Thank You.[/B]
[B]Nicely done! [/B] I tested it against my fender, both pieces … my fender arc is a little bigger in the rear part, but it could work I think, I might use the tracing to make a pair of patterns full size from some cardboard to get a better idea. [B]You saved me from "trial by order" though.[/B]
I also looked up on a shelf and there amongst other stuff, is a boxed 20 foot role of chrome/black fender trim. Unopened. I measured it through the clear wrap, just a hair under 1/2" ([COLOR=#b22222][I]call it 15/32"[/I][/COLOR]) wide chrome part with a hair over 1/8" ([I][COLOR=#b22222]call it 5/32"[/COLOR][/I]) wide fatter black portion that sits "proud" of the chrome, and it has that lip to go under the fender lip. 5/8" wide overall.
[B] [URL]https://www.carid.com/cowles/protektotrim-5-8-lip-with-bead-fender-trim-20-length-chrome-mpn-37-353.html[/URL][/B]
It has a lip and a black edge that is higher than the chrome to protect the chrome, guess I bought it to go on the trike & just forgot where I put it. Will try it first, since I have it, [B]but I'm gonna check the tracing too. [/B]
[ATTACH=CONFIG]83567[/ATTACH]
-
1 Attachment(s)
[QUOTE=CrystalPistol;734373]I also looked up on a shelf and there amongst other stuff, is a boxed 20 foot role of chrome/black fender trim. Unopened. I measured it through the clear wrap, just a hair under 1/2" ([COLOR=#b22222][I]call it 15/32"[/I][/COLOR]) wide chrome part with a hair over 1/8" ([I][COLOR=#b22222]call it 5/32"[/COLOR][/I]) wide fatter black portion that sits "proud" of the chrome, and it has that lip to go under the fender lip. 5/8" wide overall.
[B][URL]https://www.carid.com/cowles/protektotrim-5-8-lip-with-bead-fender-trim-20-length-chrome-mpn-37-353.html[/URL][/B]
It has a lip and a black edge that is higher than the chrome to protect the chrome, guess I bought it to go on the trike & just forgot where I put it. Will try it first, since I have it, [B]but I'm gonna check the tracing too. [/B][/QUOTE]
I ordered the chrome molding that you suggested above from Carid.com and installed it on my rear wheel wells. Came out looking pretty good and I am happy. I got the wheels on and my trike is all done and ready to ride. I ordered a new license plate and got insurance. I just have to wait for the DMV. to send me the license plate and of course good weather.
[ATTACH=CONFIG]83948[/ATTACH]
Greg
-
-
1 Attachment(s)
[QUOTE=Scott1;736158]I ordered the chrome molding that you suggested above from Carid.com and installed it on my rear wheel wells. Came out looking pretty good and I am happy. [COLOR=#0000ff][I][B]… etc …[/B][/I][/COLOR][/QUOTE]
[B]Looking Good to [size=3][I]GO[size=3]O[SIZE=3]O[/SIZE][SIZE=2]Oo[/SIZE][/SIZE]! ;)[/I][/SIZE]
[/B]Ready for Chapter rides now. I am waiting on it to warm up, then I'ma gonna do same.
Thanks for posting!
Just curious, it stood out in both pics, I was wondering, what's "this"? :Shrug: I'm sorry, not meaning to be nosey, it just jumps out at me when I look at the pic. :Coffee: