Off subject.
While waiting on the Paint, brake light parts and Tow-Pac
I Decided to go underground with some serious state of the art technology, to my Man Cave, music studio, work shop, etc. thanks to my Son the electrician!
Off subject.
While waiting on the Paint, brake light parts and Tow-Pac
I Decided to go underground with some serious state of the art technology, to my Man Cave, music studio, work shop, etc. thanks to my Son the electrician!
Tow-Pac got back to me with an offer.
I send them my reverse and pay the shipping and they send me the stock spindle.
Also I could get charged a 20% restocking charge, if parts don't look new, and they don't after motor rubbed on the tire.
That is $80.00 plus shipping. So I would be out well over $100.00 plus the spacer and lugs $50.00
So I would be out well over $150.00 for their crap reverse!
So I would end up with-- Less than $250.00 out of the $400.00 I paid + all the TIME and B.S.!
He also said it's been over 30 days but he would let me slide on that!
I almost told him where to go but held back and told him I would get back with him.
WOW - what a crock of BS from Tow Pac... I hope you told them that you would spread your problems all over the Internet and let everyone know what a POS it is and how badly you were treated!!!
I keep hearing stories like this about Tow Pac and I think they won't be able to stay in business if they continue on this way... Their customer service, and in this case, their engineering is really abhorrent!!! Guess I just got lucky with my purchase of their product...
I'll bet dollars to doughnuts that you see a change in the reverse setup sooner than later with the 14" tires!!!
Les
Les
I just got off the phone with Tow-Pac.
I told him how bad I was getting screwed and how it had a hard time handling my weight of 200#
He said "OH are you on the bike when you back up?
It's not made for that! You have to walk along side of the bike as it backs up"
I told him what good is that and why don't you explane that on you website?
He had no answer!
He just called me back and said I would not have to pay the $80.00 restocking fee but would have to pay shipping.
So I told him to ship me the spindle first! He has to check with the boss!
We are a two trike family: My trike is a 2004 Road King Classic with a Frankenstein conversion. My wife's trike is a 2007 Sportster with a Frankenstein conversion.
As I wait for the BS to settle!
Dennis the painter, an old biker, talked me into Not putting those 6" led lights on my trike.
He is right they will not look good and fit right. So I decided to go with his recommended LED's.
He also will help me put them on and put the parts back on the trike.
This should happen the end of next week. I'll take pictures of the event.
Here is where I got the Two lights I ordered yesterday.
https://www.jpcycles.com/product/3400521
I'm still waiting on the last of, I hope, harness wiring to come in!
The two above LED lights.
Also the parts from Tow-Pac to replace the reverse.
That's the most ridiculous thing I have ever heard!!! You have to be OFF THE BIKE to use reverse??? WTF!!! Don't know what they are smoking there but whatever it is, it is impairing there judgement and good sense!!!
Well, at least you got the restocking fee waived... Wonder if you could adapt the Voyager reverse to your setup???
The taillights look great and will enhance the appearance of the kit - good choice on those Bob...
I just don't understand Tow Pac's thinking on a lot of things - they sure are alienating a lot of customers with their less than ideal customer service or lack thereof!!!
Les
Les
This was Copy/Pasted from Tow-Pac's Website. This is All they have to say about their reverse!
Must be my fault because I didn't read between the lines!
He also said it was designed for people who could not push the bike when off of it!
Also made it sound like he is doing me a favor by taking it back. But I pay all shipping charges!
Lets see -- over $100.00 shipping and $50.00 for longer studs and spacer. I'm out plus all my time!
If I can not at lease get the money for shipping, then a long YouTube video is in order. I know how to get it on Google's first page on a search! It will cost them well over a little $100.00!
*Note it says 12" trikes but they told me it would work with 14" as well! And was glad to take my $440.00***
ELECTRIC REVERSE ASSIST
InstaDrive helps assist the rider in moving their trike in tight places such as garages or parking spaces.
- $440 if ordered with a new InstaTrike or MiniTrike kit
- $540 if ordered separately for existing InstaTrike or MiniTrike kit
DESCRIPTION
[COLOR=#222222 !important]Category: Trailers and Accessories
- Runs off of motorcycle battery. Motorcycle does not need to be running to operate
- Works with all 12 inch InstaTrike and MiniTrike kits.
- Can be installed on existing 12 inch InstaTrike and MiniTrike kits.
- Replaces left axle
- Weighs approximately 15 pounds
Well, I do not see any verbiage that states you have to be off the bike!!! Rather misleading if that's what they are saying...
After thinking about it for a while, if it were mine, I might look around to see if I could find a larger, more powerful motor that might work better. before sending the thing back.. With your skill set I think this is well within the realm of possibilities...
I would assume they are using a gear motor and powerful gear motors are available thru surplus channels that might work... Are there any identifying manufacturers markings on the motor??? It would be nice to have reverse and Voyager seems to do it... Might be worth a phone call to them to see how they handle it and if it could be adapted to the Tow Pac kit...
http://www.mtcvoyager.com/motorcycle-trike-kit-reverse/
Les
Les thanks
It's the weekend so I can't call them so I sent Voyager an email and will see what they say!
The motor looks just like an GM power window motor from the mid 80s.I think Trigg used a similar setup but used a starter motor.I'm sure anything other than their offer and your on your own.I guess you are supposed to get the not strong part from the statement about using it in garages and parking lots.
Do not argue with an idiot.He will drag you down to his level and beat you with experience.
Its dog eat dog world and i'm wearing milkbone underwear.
1989 GL1500 Goldwing (SOLD)
2006 GL1800 CSC
By going with the reverse in the trans you'd be ahead should you ever want to go with a trike conversion. Reading the tow-pac site for reverse they give little to no info on the unit and how it works. Most reverse set ups work with the rider on the trike.
Retired trike builder
America's first lady trike builder.
WOW, a power window motor??? That certainly explains why it is so slow and sluggish... The video I saw of the Voyager backing up looks like it does it with authority...
Of course, I don't have any issues with my Goldwing backing up because of the internal reverse setup... Maybe Trike Lady is correct and doing the internal install would be the better way to go... Only problem with that I see is the $$$$ but it is another option...
Les
Up date on tail lights. I will have to send them back. Awesome lights but Too big. The painter told me to get the mini ones and I got the full size.
Almost 2 1/2 pounds each. So I have the mini ones on order.
This is a picture of the mini one's, they are LED!
https://www.jpcycles.com/product/3400666
On the reverse, Look like the in Tran. is the way to go. Thanks folks.
I just got in the replacement axle from Tow-Pac.
I had to pay for it and will get my money back less shipping when I reture the reverse,
also the money I paid for the reverse. But again not the shipping on the return postage.
I'm upside down on this first shipping charge!
For Tow-Pac's sake I better not have to eat these shipping charges!
Picture not in focus but that's the replacement axel on the yellow floor.
Do not argue with an idiot.He will drag you down to his level and beat you with experience.
Its dog eat dog world and i'm wearing milkbone underwear.
1989 GL1500 Goldwing (SOLD)
2006 GL1800 CSC
Marc
Looks like you got it figured out! Looks the same to me, down to the electrical plug.
Thanks Tow-Pac!
I'm wanting to move a 1000# trike and my 200# Azz
Not a fricking piece of glass!
It looks like the GM one I had on my old Corvette !
I like how they put their "Made in the U.S.A." sticker on it, like they made it!
My two Mini LED trike tail lights came in today! They are very bright! Look good and will mount easy with two bolts and a thick rubber!
Today is a rainy nasty cold day. Looks like a good time to make a video before removing and packing up the reverse and shipping that junk back. I will tell it like it is, but on the kit part of the Tow-Pac, I will be as fair as they were to me! Nothing positive will be said! It will not get recommended due to the poor customer service, poor engineering and how they screw you over.
If something else goes South I know I'm on my own!
Junk reverse pulled for return, new axle in place.
Two good videos made, that are now at all flattering to Tow-Pac!
When I had the wheel off the ground I noticed it moves up and down a lot, It's getting its suspension for the
twisting and bending of the frame. How will it Not crack?