I cannot get the picture I have on my phone to post in the reply.
I cannot get the picture I have on my phone to post in the reply.
I took my iPad out to the shop and got some pics I could post.
Longbeard71, do you have any pictures of the main part of the support and how it is attached to the frame? Is it just one piece of 1 inch square tubing?
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.
2020 TriGlide Tahitian Teal aka (Hawaiian Hussy). Avon frt & Comfortred rear tires. ProAction frt & rear susp. RZ seat. DK floorboard extension & rear axle retainer kit with EBS, HD pull -back bars. Custom Dynamics front turn signals & Vent grill. All ,HD "Edge Cut " accessories.
I milled slotted holes in the square and used stainless steel ubolts around frame. I put some gussets in at the 90 degree turn for strength. Mine is a 2011 so no brake pedal but there is room to move the mount toward the back more. You would need to measure to see if it would clear. I have made two of these one for my 2011 and a 2012 works good for me they could be made taller mine is level with front floorboard. It makes it very easy to get on and off.
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.
Sorry I do not have any pics before I installed it. It is a single piece of 1" square tubing across the bottom.
Clay, you don’t have to take it off, but just jack it up and crawl under and take some pictures, lol, just kidding.
2018 115 anniversary Tri glide, 2 +2 narrow sweepers, DK comfort lift, DK tour pack relocation kit, pro action shocks, power vision, fuel moto air cleaner, s and s mufflers
Maybe this will help, from trike mid step web site
2018 115 anniversary Tri glide, 2 +2 narrow sweepers, DK comfort lift, DK tour pack relocation kit, pro action shocks, power vision, fuel moto air cleaner, s and s mufflers
Here are a few pictures of a mid-step that I made. It is made from 1" X .125 wall square tubing. Had no way to bend it, so I made two 45* angles. Floor boards are patterned after a set of Cobra Floor boards made for a Kawasaki VN800 They are cut down 2" made from 1/2" aluminum. Pardon the pictures of being upside down. They are not like that on my computer.
Ray
2017 Harley Triglide
Tijuana Border