Lehman Trike Trunk Lock

[Dobey260]

Hello,

I purchased my late father in laws 08 HD Ultra Classic with a Lehman Renegade trike conversion. I'm having issues with the trunk door opening up when I ride. Is there a lock or latch kit that I can install on the door? I've tried adjusting the door but it still wants to open up.

Thanks

[rhino 2]

Hello,

I purchased my late father in laws 08 HD Ultra Classic with a Lehman Renegade trike conversion. I'm having issues with the trunk door opening up when I ride. Is there a lock or latch kit that I can install on the door? I've tried adjusting the door but it still wants to open up.

Thanks

Mark.. Welcome to Trike Talk..👍👍

[cycle7447]

Hello,

I purchased my late father in laws 08 HD Ultra Classic with a Lehman Renegade trike conversion. I'm having issues with the trunk door opening up when I ride. Is there a lock or latch kit that I can install on the door? I've tried adjusting the door but it still wants to open up.

Thanks

Welcome Sir. There have been several posts on this site about the same thing. You can also search Harley Trike Trunk for more.

Hope this helps.

Up date: I have got this lock replacement worked out but it will only work on the Lehman built bodies. There is a web site called truckcaportopperreplacementparts and they have more stuff than I ever dreamed was even made. The lock system on the Lehman bodies is turned by a 1/4 inch square shaft operating the cable releases. Next time you have one break order a lockable "t" handle long shaft unir from these folks and throw away the OEM lock then drill two holds using the "t" handle rear flange as a template, guide the long squrae shaft through the square hole bolt it to the trike boody using lock nuts, problem solved. Cost, about $30.00

[Monti]

Welcome Sir. There have been several posts on this site about the same thing. You can also search Harley Trike Trunk for more.

Hope this helps.

Up date: I have got this lock replacement worked out but it will only work on the Lehman built bodies. There is a web site called truckcaportopperreplacementparts and they have more stuff than I ever dreamed was even made. The lock system on the Lehman bodies is turned by a 1/4 inch square shaft operating the cable releases. Next time you have one break order a lockable "t" handle long shaft unir from these folks and throw away the OEM lock then drill two holds using the "t" handle rear flange as a template, guide the long squrae shaft through the square hole bolt it to the trike boody using lock nuts, problem solved. Cost, about $30.00

Could you go into a little more detail on how to do this, thxs

[rhino 2]

Could you go into a little more detail on how to do this, thxs

Monti..............Welcome To Trike-Talk.........

[Monti]

Monti..............Welcome To Trike-Talk.........

thxs