DNA Trike Conversion Question about Bolt or Stud

[dmcland]

DNA Trike Conversion Question about Bolt or Stud?

all

I have seen several discussions related to using a DNA rear axle.

I saw posted this part number being discused

napa 641-3132

when I pull this part number it comes back as M12-1.5 Wheel Bolt - 17mm Hex, 29.5mm Length

So my question is, does the axle use bolts for the wheels or studs?

many thanks

Darin

[Jack Klarich]

A wheel stud is a pressed in lug bolt

Like this You can punch the old 1 out, use a stack of washers and turn a lug nut around backwards to pull the new stud thru the hole

[dmcland]

A wheel stud is a pressed in lug bolt

Like this You can punch the old 1 out, use a stack of washers and turn a lug nut around backwards to pull the new stud thru the hole

So the axel uses studs not bolts?

thanks

[Jack Klarich]

299?'300px':'auto');" border="0">If your axle looks like this, area @ the rotor face smooth you have lug bolts that bolt thru the wheel and into the hub

[dmcland]

299?'300px':'auto');" border="0">If your axle looks like this, area @ the rotor face smooth you have lug bolts that bolt thru the wheel and into the hub

Excellent, thank you,

I can get supplies together as I wait for shipment

Darin