buy the outlet at any auto store make sure you buy the complete outlet,dill a 1 inch hole in the back of the pocket hook the red wire to hot and black to ground,that it.
How do you add a 12 volt outlet to the left fairing pocket? Is there a video out there showing the procedure?
Gerald
buy the outlet at any auto store make sure you buy the complete outlet,dill a 1 inch hole in the back of the pocket hook the red wire to hot and black to ground,that it.
I don't know what type of bike you have so this may not apply.
Before drilling make sure there is room behind the pocket to accept the outlet.I miscalculated and had to make a plastic "washer" to cover my mistake.
Also if hooking directly to battery make sure you install an inline fuse.
Good luck and ride safe,
Tip
I understand the wiring, but would like to be clear on the removal of the pocket before I start.
Gerald
Jerry "Gold Rush" (aka: "SPOOK") San Angelo, TX
2015 GL1800/Roadsmith HTS1800
TOI - IBA #23804 (SS1K & BB1.5K)
I'm like an old race horse..... I can still run the race -- Just ache more at the finish line and need more rest between outings.
the trike is an 08 gold wing
gerald