I have a 2005 Ultra Classic/Leaman and don't if the drive belt is standard Harley or a Leaman part. Anyone know? Hope it's Harley with the problems Leaman is having.
I have a 2005 Ultra Classic/Leaman and don't if the drive belt is standard Harley or a Leaman part. Anyone know? Hope it's Harley with the problems Leaman is having.
I have the same setup, but can't answer your question. I did notice the drive belt is much narrower then the one on my two wheeler. They do make belts that are different sizes, so the best bet would to be match it up.
Is your belt about 1"- 11/8" wide?
I wouldn't worry about Lehman as they don't make their own belts. Most belts I have seen have some type of part number or manufacture number on them. I was thinking of gettting a wider one if I replaced mine, as the belt pulley looks wider then the belt. Next time I jack up the trike I will take a closer look at mine.
Thanks, don't need one now, just wanted to make sure I could get one if needed.
Your trike uses the stock belt it came with.
Overcoming Adversity is the path to better ideas!!
2008 Roadglide w/ MOTOR TRIKE Kit
S&S 124" Headwork & Custom designed cams by John
Custom made right side shifter (Lost my left leg above the knee due to a hit n run driver) SOOS's custom made floorboard spacer
Good news FLTR2008TRIKE. I assume you mean the belt that came with the motorcycle from Harley. Thanks
Overcoming Adversity is the path to better ideas!!
2008 Roadglide w/ MOTOR TRIKE Kit
S&S 124" Headwork & Custom designed cams by John
Custom made right side shifter (Lost my left leg above the knee due to a hit n run driver) SOOS's custom made floorboard spacer