150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
DK Custom Products362rhino 2Harley Tri GlideWhat did you do to Your Tri-Glide T...
DK Custom Products362Rogue1Harley Tri GlideWhat did you do to Your Tri-Glide T...
Papa Zook96SullyBBQ, Grilling, Cooki...Whats for supper?
SSpoon5trike ladyNew Member Introduct...Hello from VA
gfaltersack1gfaltersackHarley Tri GlideDK Customs remote oil filter kit in...
SSpoon5SullyNew Member Introduct...Hello from VA
ctdair8Old Road DogHarley Tri GlideHot Rotors After New Pads
Oldman-TriGlide7BlueGrabberHarley Tri GlideEnclosed Trailer Size
SSpoon5Jack KlarichNew Member Introduct...Hello from VA
SSpoon5GorillaNew Member Introduct...Hello from VA
SSpoon5SSpoonNew Member Introduct...Hello from VA
14TG414TGHarley Tri GlideInstallation of a new Fuel Filter &...
New Orleans Kevin7Jack KlarichHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
14TG4Jack KlarichHarley Tri GlideInstallation of a new Fuel Filter &...
Seaweed7NotgrownupHarley Tri GlideLower Fairing Vents
14TG4GorillaHarley Tri GlideInstallation of a new Fuel Filter &...
14TG414TGHarley Tri GlideInstallation of a new Fuel Filter &...
14TG4Jack KlarichHarley Tri GlideInstallation of a new Fuel Filter &...
DrCrazyTrain3Jack KlarichHarley Freewheeler /...True Dual Header
ctdair8Jack KlarichHarley Tri GlideHot Rotors After New Pads
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
14TG4TrampasHarley Tri GlideInstallation of a new Fuel Filter &...
520fd3Rogue1For Sale & WTB C...FS: Trike Mid-Step
520fd3520fdFor Sale & WTB C...FS: Trike Mid-Step
14TG414TGHarley Tri GlideInstallation of a new Fuel Filter &...
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
Jack Klarich1Jack KlarichGeneral Harley ChatExhaust Heat Shield
BigN693Jack KlarichEnabled TrikersFull length floorboards
JTJersey5Noodles107Harley Freewheeler /...Removing Trim Around Oil Cooler
ctdair8Old Road DogHarley Tri GlideHot Rotors After New Pads
ctdair8Old Road DogHarley Tri GlideHot Rotors After New Pads
Phu Cat4Phu CatGeneral DiscussionIs there a TV commercial
TXFIRE765GoldWingrGregHonda TrikesNew to Trikes and needing a convers...
paid4c431GoldWingrGregHonda TrikesDifference in touring between two w...
Donnimac4GoldWingrGregHonda TrikesLehman Monarch II
paid4c410GoldWingrGregHonda TrikesService for differential on a Motor...
DrCrazyTrain3powerhaulicHarley Freewheeler /...True Dual Header
520fd3NotgrownupFor Sale & WTB C...FS: Trike Mid-Step
Yannick25vwbug72501VW Powered TrikesWil-Mac trike kit
520fd3520fdFor Sale & WTB C...FS: Trike Mid-Step
Bear22012Jack KlarichNew Member Introduct...New member
Phu Cat4rhino 2General DiscussionIs there a TV commercial
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
scaldedchevy3Papa ZookLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
hogmemberisold2cScjhbGeneral DiscussionHow many carry spare headlight bulb...
Phu Cat4cScjhbGeneral DiscussionIs there a TV commercial
DrCrazyTrain3DrCrazyTrainHarley Freewheeler /...True Dual Header
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
New Orleans Kevin7MykneesbehurtinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
DK Custom Products362Jack KlarichHarley Tri GlideWhat did you do to Your Tri-Glide T...
ctdair8MykneesbehurtinHarley Tri GlideHot Rotors After New Pads
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
Seaweed7Jack KlarichHarley Tri GlideLower Fairing Vents
14TG6Jack KlarichHarley Tri GlideInstalled Genuine HD Armrest kit
ctdair8Jack KlarichHarley Tri GlideHot Rotors After New Pads
Phu Cat4trike ladyGeneral DiscussionIs there a TV commercial
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
scaldedchevy3Papa ZookLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
AriNV6Papa ZookRider Safety Discuss...Maybe silly but serious question, s...
Phu Cat4Phu CatGeneral DiscussionIs there a TV commercial
TwoBye1TwoByeFor Sale & WTB C...GL1500 Tall windshield
scaldedchevy3MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
Gernerwa11SullyNew Member Introduct...New Member from Bellingham, WA
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
Jack Klarich2Jack KlarichGeneral DiscussionGreat Day for a ride today
Gernerwa11Jack KlarichNew Member Introduct...New Member from Bellingham, WA
Gernerwa11Jack KlarichNew Member Introduct...New Member from Bellingham, WA
Jarhead17753Jack KlarichHarley Freewheeler /...paint job
hogmemberisold2hogmemberisoldGeneral DiscussionHow many carry spare headlight bulb...
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG6Papa ZookHarley Tri GlideInstalled Genuine HD Armrest kit
AriNV6Papa ZookRider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6pawsRider Safety Discuss...Maybe silly but serious question, s...
B SMITH10rhino 2Harley Tri GlideTrailering Tri Glide
B SMITH10DK Custom ProductsHarley Tri GlideTrailering Tri Glide
AriNV6Pegasus1300Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
TomyJ16TomyJHome Built TrikesRebel RT
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
AriNV13Jack KlarichNew Member Introduct...New to trike
steelpony55553Jack KlarichDetailingCeramic coating
AriNV6Jack KlarichRider Safety Discuss...Maybe silly but serious question, s...
JTJersey5Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
steelpony55553AriNVDetailingCeramic coating
AriNV13AriNVNew Member Introduct...New to trike
JTJersey5Old Road DogHarley Freewheeler /...Removing Trim Around Oil Cooler
paid4c410VulcanscottHonda TrikesService for differential on a Motor...
DK Custom Products362New Orleans KevinHarley Tri GlideWhat did you do to Your Tri-Glide T...
AriNV13Pegasus1300New Member Introduct...New to trike
Jarhead17753GorillaHarley Freewheeler /...paint job
New Orleans Kevin7New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
TomyJ8Jack KlarichSidecar ForumHackHer
JTJersey5Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV4Jack KlarichCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
ISP-FL2ISP-FLThe Knife EnthusiestBenchmade Warranty
woody13Rmitchell55Maggie Valley Gather...Maggie Valley 2024
New Orleans Kevin7ISP-FLHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13PosseRiderMaggie Valley Gather...Maggie Valley 2024
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
New Orleans Kevin7NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
New Orleans Kevin7PanheadSteveHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac4DonnimacHonda TrikesLehman Monarch II
Donnimac4DonnimacHonda TrikesLehman Monarch II
ken g9rhino 2Harley Tri Glidereverse not working
New Orleans Kevin7New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
ken g9520fdHarley Tri Glidereverse not working
520fd3520fdFor Sale & WTB C...FS: Trike Mid-Step
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey5rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
myhonda614TGHarley Tri GlideKuryakyn filler pad
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
ken g9ken gHarley Tri Glidereverse not working
JTJersey5rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
myhonda614TGHarley Tri GlideKuryakyn filler pad
AriNV4AriNVCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
TFNC12AriNVNew Member Introduct...Just saying hello
Jarhead17753Jarhead1775Harley Freewheeler /...paint job
AriNV13AriNVNew Member Introduct...New to trike
AriNV13AriNVNew Member Introduct...New to trike
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
woody13woodyMaggie Valley Gather...Maggie Valley 2024
myhonda6NotgrownupHarley Tri GlideKuryakyn filler pad
New Orleans Kevin7NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac4MickHonda TrikesLehman Monarch II
Gernerwa11trike ladyNew Member Introduct...New Member from Bellingham, WA
myhonda6Rmitchell55Harley Tri GlideKuryakyn filler pad
Gernerwa11GorillaNew Member Introduct...New Member from Bellingham, WA
Yannick25GorillaVW Powered TrikesWil-Mac trike kit
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
Donnimac4GorillaHonda TrikesLehman Monarch II
Gernerwa11rhino 2New Member Introduct...New Member from Bellingham, WA
Gernerwa11Marc HNew Member Introduct...New Member from Bellingham, WA
Gernerwa11Uncle FesterNew Member Introduct...New Member from Bellingham, WA
MDO100ZammyHarley Freewheeler /...What Did You Do To Your Freewheeler...
Gernerwa11ZammyNew Member Introduct...New Member from Bellingham, WA
AriNV13Phu CatNew Member Introduct...New to trike
New Orleans Kevin7New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Jjhooker22DeathBySnuSnuVW Powered TrikesSide shifter assembly for 1980 WilM...
Rodnok12ol' schoolNew Member Introduct...Hello Honda Trike owners!
AriNV13ol' schoolNew Member Introduct...New to trike
TFNC12ol' schoolNew Member Introduct...Just saying hello
Likes Likes:  0
Thanks Thanks:  0
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 31

Thread: Engine heat tri glide

  1. #1
    20+ Posts
    Join Date
    Sep 2011
    Location
    seagoville,texas.usa
    Posts
    26

    Default Engine heat tri glide

    I have a 2011 triglide ultra classic and this is the first harley i have owned.
    My question is how can you tell when your engine is to hot and you need to shut it down to cool off. 105 here in Texas and at traffic lights some time they are very long and iam concerned about over heating the engine. any comments will help with my concern of frying the engine.

  2. #2
    1750+ Posts Trent's Avatar
    Join Date
    Jul 2011
    Location
    Meridian, ID. USA
    Posts
    1,383

    Default Re: Engine heat tri glide

    There are more threads here about this subject than I have hairs on my head! Go to the search link above and type in TriGlide heat issues and be prepared to be overwhelmed.

  3. #3
    TheBobs
    Guest

    Default Re: Engine heat tri glide

    Welcome to the forum. My 2012 TG and I recently got stuck in a Denver rush hour traffic jam on my way back to California. It was 100 degrees that day. Spent about 45 minutes going 5-10 mph or so. I have a fairing mounted oil temperature gauge. Temps on the I-70 outside of town going 75 mph were about 280 deg. Within 15 minutes of traffic, oil temp reached around 300 deg. I was in the fast lane and couldn't get over. Never idled, so no ETIMS. By the time we got west side of the I-35 and moving again, oil temp was about 320 deg. It never went down even at 55 mph due to climbing in elevation up the mountain. I couldn't really get over until I got to about 7,000 ft. Oil temp was about 350 degrees or so and I finally got to a place where I could pull over. Chief Hosa offramp. Sat there for about 30 minutes. Oil temps back down to about 200 deg. For the rest of the climb to Loveland Pass, oil temps were about 270-300 degrees with air temps around 75 degrees above 8,000 feet. To put things in perspective, oil temps were 270-300 degrees for the rest of the trip. Sorry for long story, but you asked how hot the engine is when you have to shut it down and how can you tell. My answer is anicdotal, I ran it well above 300 degrees for a long time, pretty much because I had no choice. It started running poorly just before I pulled over and I had to get very aggressive to get in a position to pull off. I've since put another 1,500 miles on it and it's still running ok. I am running SYN-3 and a 50-state legal stage I tune. Even running it in some extreme conditions it held up pretty darn good. Make sure you run a good synthetic oil and the newest stock or stage I tune HD has for the 2011. You should be ok if my experience is any indication of what these new TGs can handle. There's a bunch of "cooling tactics" you can do, but that's another thread and there's a good sticky thread in this section by Wizard that is mandatory reading. Good luck, ride safe!

  4. #4
    20+ Posts
    Join Date
    Sep 2011
    Location
    seagoville,texas.usa
    Posts
    26

    Default Re: Engine heat tri glide

    thanks for all your info will help alot

  5. #5
    Class Clown Bikerbozo's Avatar
    Join Date
    Jun 2010
    Location
    Coram, NY USA
    Posts
    4,338

    Default Re: Engine heat tri glide

    Keep in mind, if sitting in traffic, the HD engines are designed to stop firing on the rear cylinder to cut down on heat. I learned this on the Cross Bronx Expressway years ago. Yes, as bad as the name implies. Didn't know why idle speed dropped so low until HD mechanic told me about it. Synthetic oil is a must also.

  6. DKCustoms postbit
  7. #6
    750+ Posts
    Join Date
    Aug 2011
    Location
    Lake Murray, SC
    Posts
    766

    Default Re: Engine heat tri glide

    I was told by an H-D mechanic who left the H-D dealer to go it on his own not to shut it down when it is hot but to get some air moving, if you can't I guess you would have to shut down. I have the H-D parade fan and an UltraCool 18 row oil cooler with 2 high capacity fans. In HOT weather and in traffic it will run 230* to 250* max.

  8. #7
    20+ Posts
    Join Date
    Sep 2011
    Location
    seagoville,texas.usa
    Posts
    26

    Default Re: Engine heat tri glide

    I was thinking of getting the fan but $400.00 is a lot

  9. #8
    TheBobs
    Guest

    Default Re: Engine heat tri glide

    I've recently installed Wards Parts Werks FCS fans. They work really good and look even better.

  10. #9
    50+ Posts
    Join Date
    Mar 2012
    Location
    Minnesota
    Posts
    52

    Default Re: Engine heat tri glide

    This what I have done to combat the heat problem on 2012 Triglide.

    1- took off the lowers
    2- installed floor board extenders
    3- installed 3 1/2 inch jackpot mufflers
    4- installed fuel moto air cleaner
    5- intalled a tune from fuel moto with the power vision tuner
    6- opened up the bat wings to let the air flow thru

    I have the Jackpot HTC Ceramic headpipes on order.

    The trike run real good and most of the heat seems to be reduced alot. The mufflers have a great sound not to load and nice and deep rumble to them. I a happy camper so far.
    Retired but plenty of spark left.
    Minnesota Dick ThumbUp

  11. #10
    2500+ Posts GARYD's Avatar
    Join Date
    Oct 2011
    Location
    GLEN ELLYN, IL. USA
    Posts
    2,648

    Default Re: Engine heat tri glide

    Crotch coolers work fantastic - that's the first thing I would do - then work from there.

    Back a few years ago I was coming back from Canada (03 Ultra) and had bumber to bumper traffic up to the gestopo gates. I'm sitting there not moving more then 6 or 8 feet at a time - veeery slow. Anyway the bike starts moving - I have the clutch pulled all the way in - I can't stop it. So I pull over to the side and shut it off(could not get it into neutral if my life depended on it). Checked the LED dipstick - temps was 300*. I sat on the shoulder for 1/2 hour then got back in line and eventually passed the gates.
    Immediately change all the fluids when I got home.
    So I'm assuming the bike will move on it's own if the engine/fluids gets too hot. I don't have any other explanation.

  12. #11
    50+ Posts
    Join Date
    Feb 2012
    Location
    CHISHOLM MN USA
    Posts
    57

    Default Re: Engine heat tri glide

    I have a crotch cooler for sale if anybody is interested, it really helps but I amchanging my complete exhaust system
    and hopefull won't need it $70 shipped I used it for 1 week.

  13. #12
    1000+ Posts screwball's Avatar
    Join Date
    Apr 2011
    Location
    Santa Clarita, SoCa & Bullhead City, Az
    Posts
    1,175

    Default Re: Engine heat tri glide

    New car coolant temperatures are usually 240* Synthetic oil temperature breakdown is over 400* You can't guess how hot your bike is. If it really bothers you, get an oil temp gage installed. Now you will spend 90% of your time looking at the gage instead of the beautiful scenery. Try and stay out of stop and go traffic and you won't have a problem. I live in Southern California, it is 109* today. Wife and I rode about 100 miles for lunch (and back) It's a Harley, they run hot. Put a fan on your oil cooler, where do you think that air blows....
    http://www.triketalk.com/forum/custo...epic4494_1.gif
    Why 3 wheels?

    because 2 isn't enough and 4 is too many
    We are really Steve & Vesta Brown
    Her: 2014 Tri-Glide Me: 2015 Freewheeler
    Vietnam Vet 1967-68 U.S. Air Force

  14. #13
    750+ Posts
    Join Date
    May 2011
    Location
    peru,in,usa
    Posts
    755

    Default Re: Engine heat tri glide

    TO GARYD: you need to adjust your clutch. the engine should dis-engage when you pull -in the clutch. do you have 1/16" play in the clutchwhen you releas it?
    to The bobs, have you tryed to put your trike in the parade mode? that should help. lb

  15. #14
    2500+ Posts GARYD's Avatar
    Join Date
    Oct 2011
    Location
    GLEN ELLYN, IL. USA
    Posts
    2,648

    Default Re: Engine heat tri glide

    eagle1, my clutch is adjusted to factory specs. I only had this problem once more a few years later - again only after the temps reached 300*. It wasn't as bad as the first time, but it still started to creep with the clutch pulled in. No other times.
    I understand the engine is suppose to dis-engage when the clutch is pulled in, but it diden't.
    I have spoken to a couple of other riders that had the same thing happen to them, so I'm not the only one.

    I just have to keep from getting into that position from now on.

  16. #15
    50+ Posts
    Join Date
    Apr 2012
    Location
    GA and FL
    Posts
    58

    Default Re: Engine heat tri glide

    Snow, as you'll read further on opinions differ on this but first thing I'd do is install a fairing mounted oil temp gauge in place of the silly air temp gauge. As Screwball noted it's easy to let yourself become obsessed with it and miss the ride so I try not to do that, but I'm into knowing what's going on with my engine-especially with heat. By simple interpolating I figure that cylinder head temp must run about 25* hotter than oil temp. EITMS is designed to kick in at 284* CHT I believe, and when it kicks in on mine at a light I'm usually showing about 260 on oil temp. Screwball is dead right on the best policy being just to stay out of traffic but sometimes for me it's unavoidable. After my mods so far I almost never see more than 230-240 oil temp now under any conditions until I get caught in traffic. Then all bets are off. Kind of a funny thing and I'll bet Screwball will know exactly what I'm talking about here, but my oil temp is a little like my blood sugar. Once it gets up high it tends to stay that way even after you reverse the variables that got it high to start with. So yes, absolutely try to stay out of traffic.


    Quote Originally Posted by Bikerbozo View Post
    Keep in mind, if sitting in traffic, the HD engines are designed to stop firing on the rear cylinder to cut down on heat. I learned this on the Cross Bronx Expressway years ago. Yes, as bad as the name implies. Didn't know why idle speed dropped so low until HD mechanic told me about it. Synthetic oil is a must also.
    +1 on the synthetic oil and do make sure your EITMS is enabled. I was so proud of mine because it was never coming on, so I figured the stock trike wasn't running too hot. Then I find out that for some reason it comes disabled from the factory, and my dealer never turned it on either. Make sure it is enabled. Procedure is in the OM and is very simple, if not a little counterintuitive.

    Quote Originally Posted by Lakeman View Post
    I was told by an H-D mechanic who left the H-D dealer to go it on his own not to shut it down when it is hot but to get some air moving, if you can't I guess you would have to shut down. I have the H-D parade fan and an UltraCool 18 row oil cooler with 2 high capacity fans. In HOT weather and in traffic it will run 230* to 250* max.
    Lakeman, how do you like that Ultracool cooler? I have only heard from people that have the Jagg. Did you do a before-after test to see how much heat it cuts out?

    Quote Originally Posted by Minnesota Dick View Post
    This what I have done to combat the heat problem on 2012 Triglide.

    1- took off the lowers
    2- installed floor board extenders
    3- installed 3 1/2 inch jackpot mufflers
    4- installed fuel moto air cleaner
    5- intalled a tune from fuel moto with the power vision tuner
    6- opened up the bat wings to let the air flow thru

    I have the Jackpot HTC Ceramic headpipes on order.

    The trike run real good and most of the heat seems to be reduced alot. The mufflers have a great sound not to load and nice and deep rumble to them. I a happy camper so far.

    I've done almost exactly the same things with mine and it helped tremendously on mine too. Next up is a good fan-assisted oil cooler, then I will feel like I've done about all I can do. After that, what it is will just have to be what it is...

    Good Luck, snow!

    I promise the end result is worth the effort.

  17. DKCustoms postbit
  18. #16
    Class Clown Bikerbozo's Avatar
    Join Date
    Jun 2010
    Location
    Coram, NY USA
    Posts
    4,338

    Default Re: Engine heat tri glide

    Almost forgot a clutch issue I ran across years ago. Metal expands when it is hot. My clutch cable was lengthening just enough that I could feel the extra play in it. Made stopping a lot harder since it wouldn't release clutch completely. And living near NYC, if I think of avoiding traffic...fugedaboudit!

  19. #17
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Re: Engine heat tri glide

    I have never been a "parade fan" fan. (a mouth full) But I started hearing about this small dual fan setup designed and built by a guy named Jason Ward. He designed and built it, then perfected it on and for his own Harley. After getting it right, offered to make for others, building them himself and the quality shows in finished product. Got mine a week ago. I had stopped using the trike for my short in-town trips just because of high temps after having to wait on traffic lights and trains. Now after riding till it warms up some, turn on fans and so far, great. I have even let bike idle waiting on trains and it will not raise head temp. Over the next few weeks I should be able to get it out on highways combined with stop and go traffic for an all day test.
    You hardly notice them installed and with motor running, you do not hear them.
    No interest in this company, just nice to report something good that was developed and made by a fellow rider that has so far done what it states it will do and makes them himself. (the American way)
    Dennis Swan
    TESTIMONIALS - WARDS PARTS WERKS
    Link to show you the fans in action with a bike at idle.

  20. #18
    TheBobs
    Guest

    Default Re: Engine heat tri glide

    +1 Dennis. I can vouch for their quality and cooling effectiveness. THEY WORK

  21. #19
    2500+ Posts GARYD's Avatar
    Join Date
    Oct 2011
    Location
    GLEN ELLYN, IL. USA
    Posts
    2,648

    Default Re: Engine heat tri glide

    Interesting set up, but doesn't that rear fan throw engine heat right onto your left leg?

  22. #20
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Re: Engine heat tri glide

    Quote Originally Posted by GARYD View Post
    Interesting set up, but doesn't that rear fan throw engine heat right onto your left leg?
    It blows across to the right side. To date, I feel little of it and it may be being caught by the crotch cooler I have installed.<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o></o>
    Around town so far, a lot better. I hope in the next few days to get time to test all day and at different speeds. Rain here now, want a good hot day.<o></o>
    What I can say, I let bike idle today till it had "head temp" reading of 260, turned on fans, went down to 225 and stayed in that area. the bike idled for 30 minutes, I never would be able to do that regardless of other things added and I still had some oil pressure which before at idle and hot would all but disappear.<o></o>
    As a note, as I run the power vision tuner, I re-flashed bike with stock tune from Harley (bought July 2010) and never had any other tunes downloaded from them. So bike is stock except I have removed CAT from stock pipe and wrapped and have an aftermarket A/C on it, stock mufflers. Just wanted to see how it would handle a basic stock T Glide.<o></o>
    Dennis

Page 1 of 2 1 2 LastLast

Similar Threads

  1. +1.5 Oil Pan to Reduce Engine Heat
    By hdruss in forum Harley Trike Conversions
    Replies: 24
    Last Post: 11-28-2012, 10:32 AM
  2. OMG - suing Harley for engine heat!
    By Maria in forum Harley Tri Glide
    Replies: 17
    Last Post: 09-13-2011, 08:47 AM
  3. Engine heat?
    By Carbon_One in forum Stallion Trikes
    Replies: 9
    Last Post: 10-08-2010, 09:55 AM
  4. Help - the heat from the engine is awful!
    By trikermary in forum Harley Tri Glide
    Replies: 48
    Last Post: 07-27-2009, 12:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •