150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
Jack Klarich1Jack KlarichGeneral Harley ChatExhaust Heat Shield
BigN693Jack KlarichEnabled TrikersFull length floorboards
JTJersey5Noodles107Harley Freewheeler /...Removing Trim Around Oil Cooler
ctdair8Old Road DogHarley Tri GlideHot Rotors After New Pads
ctdair8Old Road DogHarley Tri GlideHot Rotors After New Pads
Phu Cat4Phu CatGeneral DiscussionIs there a TV commercial
TXFIRE765GoldWingrGregHonda TrikesNew to Trikes and needing a convers...
paid4c431GoldWingrGregHonda TrikesDifference in touring between two w...
Donnimac4GoldWingrGregHonda TrikesLehman Monarch II
paid4c410GoldWingrGregHonda TrikesService for differential on a Motor...
DrCrazyTrain2powerhaulicHarley Freewheeler /...True Dual Header
520fd2NotgrownupFor Sale & WTB C...FS: Trike Mid-Step
Yannick25vwbug72501VW Powered TrikesWil-Mac trike kit
520fd2520fdFor Sale & WTB C...FS: Trike Mid-Step
Bear22012Jack KlarichNew Member Introduct...New member
Phu Cat4rhino 2General DiscussionIs there a TV commercial
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
scaldedchevy3Papa ZookLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
hogmemberisold2cScjhbGeneral DiscussionHow many carry spare headlight bulb...
Phu Cat4cScjhbGeneral DiscussionIs there a TV commercial
DrCrazyTrain2DrCrazyTrainHarley Freewheeler /...True Dual Header
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
New Orleans Kevin6MykneesbehurtinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
DK Custom Products362Jack KlarichHarley Tri GlideWhat did you do to Your Tri-Glide T...
ctdair8MykneesbehurtinHarley Tri GlideHot Rotors After New Pads
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
Seaweed6Jack KlarichHarley Tri GlideLower Fairing Vents
14TG6Jack KlarichHarley Tri GlideInstalled Genuine HD Armrest kit
ctdair8Jack KlarichHarley Tri GlideHot Rotors After New Pads
Phu Cat4trike ladyGeneral DiscussionIs there a TV commercial
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
scaldedchevy3Papa ZookLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
AriNV6Papa ZookRider Safety Discuss...Maybe silly but serious question, s...
Phu Cat4Phu CatGeneral DiscussionIs there a TV commercial
TwoBye1TwoByeFor Sale & WTB C...GL1500 Tall windshield
scaldedchevy3MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
Gernerwa11SullyNew Member Introduct...New Member from Bellingham, WA
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
Jack Klarich2Jack KlarichGeneral DiscussionGreat Day for a ride today
Gernerwa11Jack KlarichNew Member Introduct...New Member from Bellingham, WA
Gernerwa11Jack KlarichNew Member Introduct...New Member from Bellingham, WA
Jarhead17753Jack KlarichHarley Freewheeler /...paint job
hogmemberisold2hogmemberisoldGeneral DiscussionHow many carry spare headlight bulb...
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG6Papa ZookHarley Tri GlideInstalled Genuine HD Armrest kit
AriNV6Papa ZookRider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6pawsRider Safety Discuss...Maybe silly but serious question, s...
B SMITH10rhino 2Harley Tri GlideTrailering Tri Glide
B SMITH10DK Custom ProductsHarley Tri GlideTrailering Tri Glide
AriNV6Pegasus1300Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
TomyJ16TomyJHome Built TrikesRebel RT
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
AriNV13Jack KlarichNew Member Introduct...New to trike
steelpony55553Jack KlarichDetailingCeramic coating
AriNV6Jack KlarichRider Safety Discuss...Maybe silly but serious question, s...
JTJersey5Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
AriNV6cycle7447Rider Safety Discuss...Maybe silly but serious question, s...
AriNV6AriNVRider Safety Discuss...Maybe silly but serious question, s...
steelpony55553AriNVDetailingCeramic coating
AriNV13AriNVNew Member Introduct...New to trike
JTJersey5Old Road DogHarley Freewheeler /...Removing Trim Around Oil Cooler
paid4c410VulcanscottHonda TrikesService for differential on a Motor...
DK Custom Products362New Orleans KevinHarley Tri GlideWhat did you do to Your Tri-Glide T...
AriNV13Pegasus1300New Member Introduct...New to trike
Jarhead17753GorillaHarley Freewheeler /...paint job
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
TomyJ8Jack KlarichSidecar ForumHackHer
JTJersey5Jack KlarichHarley Freewheeler /...Removing Trim Around Oil Cooler
AriNV4Jack KlarichCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
ISP-FL2ISP-FLThe Knife EnthusiestBenchmade Warranty
woody13Rmitchell55Maggie Valley Gather...Maggie Valley 2024
New Orleans Kevin6ISP-FLHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
woody13PosseRiderMaggie Valley Gather...Maggie Valley 2024
ctdair8ctdairHarley Tri GlideHot Rotors After New Pads
New Orleans Kevin6NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
New Orleans Kevin6PanheadSteveHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac4DonnimacHonda TrikesLehman Monarch II
Donnimac4DonnimacHonda TrikesLehman Monarch II
ken g9rhino 2Harley Tri Glidereverse not working
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
ken g9520fdHarley Tri Glidereverse not working
520fd2520fdFor Sale & WTB C...FS: Trike Mid-Step
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey5rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
myhonda614TGHarley Tri GlideKuryakyn filler pad
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
ken g9ken gHarley Tri Glidereverse not working
JTJersey5rhino 2Harley Freewheeler /...Removing Trim Around Oil Cooler
JTJersey5JTJerseyHarley Freewheeler /...Removing Trim Around Oil Cooler
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
myhonda614TGHarley Tri GlideKuryakyn filler pad
AriNV4AriNVCan Am Spyder Trike...I'm a total newbie ... Is the Spyde...
TFNC12AriNVNew Member Introduct...Just saying hello
Jarhead17753Jarhead1775Harley Freewheeler /...paint job
AriNV13AriNVNew Member Introduct...New to trike
AriNV13AriNVNew Member Introduct...New to trike
myhonda6Rogue1Harley Tri GlideKuryakyn filler pad
woody13woodyMaggie Valley Gather...Maggie Valley 2024
myhonda6NotgrownupHarley Tri GlideKuryakyn filler pad
New Orleans Kevin6NotgrownupHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Donnimac4MickHonda TrikesLehman Monarch II
Gernerwa11trike ladyNew Member Introduct...New Member from Bellingham, WA
myhonda6Rmitchell55Harley Tri GlideKuryakyn filler pad
Gernerwa11GorillaNew Member Introduct...New Member from Bellingham, WA
Yannick25GorillaVW Powered TrikesWil-Mac trike kit
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
Donnimac4GorillaHonda TrikesLehman Monarch II
Gernerwa11rhino 2New Member Introduct...New Member from Bellingham, WA
Gernerwa11Marc HNew Member Introduct...New Member from Bellingham, WA
Gernerwa11Uncle FesterNew Member Introduct...New Member from Bellingham, WA
MDO100ZammyHarley Freewheeler /...What Did You Do To Your Freewheeler...
Gernerwa11ZammyNew Member Introduct...New Member from Bellingham, WA
AriNV13Phu CatNew Member Introduct...New to trike
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Jjhooker22DeathBySnuSnuVW Powered TrikesSide shifter assembly for 1980 WilM...
Rodnok12ol' schoolNew Member Introduct...Hello Honda Trike owners!
AriNV13ol' schoolNew Member Introduct...New to trike
TFNC12ol' schoolNew Member Introduct...Just saying hello
AriNV13hardwickbvNew Member Introduct...New to trike
whiskeyneat10ol' schoolNew Member Introduct...Howdy"
Gernerwa11hardwickbvNew Member Introduct...New Member from Bellingham, WA
Gernerwa11ol' schoolNew Member Introduct...New Member from Bellingham, WA
scaldedchevy3MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
Jjhooker22Jjhooker2VW Powered TrikesSide shifter assembly for 1980 WilM...
Jack Klarich2TomyJTires, Wheels, Brake...Motorcycle Tire Reference
New Orleans Kevin6JTJerseyHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
Jjhooker22DeathBySnuSnuVW Powered TrikesSide shifter assembly for 1980 WilM...
Gernerwa11GernerwaNew Member Introduct...New Member from Bellingham, WA
New Orleans Kevin6New Orleans KevinHarley Tri Glide2021 114 Triglide Stage 2 Feuling 4...
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy3scaldedchevyLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
scaldedchevy3MickLehman Trike2004 Gold Wing Lehman Monarch 2 Sho...
ken g9OLBLUHarley Tri Glidereverse not working
Jjhooker22Jjhooker2VW Powered TrikesSide shifter assembly for 1980 WilM...
Yannick25Jjhooker2VW Powered TrikesWil-Mac trike kit
Yannick25Jjhooker2VW Powered TrikesWil-Mac trike kit
myhonda6SeaweedHarley Tri GlideKuryakyn filler pad
Donnimac4DonnimacHonda TrikesLehman Monarch II
ken g9rhino 2Harley Tri Glidereverse not working
BigN693GorillaEnabled TrikersFull length floorboards
woody13Marc HMaggie Valley Gather...Maggie Valley 2024
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
14TG614TGHarley Tri GlideInstalled Genuine HD Armrest kit
Likes Likes:  0
Thanks Thanks:  0
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 25

Thread: Options and why

  1. #1
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Options and why

    Some on here have experience on the Harley Tri-Glide from 2009, some like me, only two years. (2011 model)<O
    We all have done things to them for our own reasons, I would like this thread to discuss what you have done for what reason and if it worked for you or not. Would not like this thread used for someone to knock someone else's choices of modifications'.<O
    Bumper: It came on mine as a dealer installed before they put on the floor to sale. I like it and recommend it as an option.<O
    Retractable cord on tour box lid: It also was already on mine when I looked at it. I think I will make myself some sort of solid support for it soon as I carry a bag on it while traveling.<O
    Luggage rack on Tour Box: I like these for looks and I use it allot. I also installed it with longer hardware and larger washers. Ran my bolts through lid organizer on lid inside to help hold it on.<O
    Tour Box lid organizer: I used the old one from my 05 Ultra. I think I will remove and use the ones that go around inside edge of bottom section of tour box.<O></O>
    Tour Box light kit: Turns large lights into stop / brake lights. Came from dealer that way and good option.<O
    Head Pipes: I bought a stock pipe that had CAT cut out. I wrapped completely with good header pipe wrap. Lessened radiated heat from pipe and CAT on right side. Would go this route again myself. Allows me to run stock slip-ons that gives me a sound a little louder than stock and not too loud to interfere with enjoyment of long days in saddle.<O
    Adjustable Back Rest for rider: This I like and use. Liked the old one on my Ultra better but it went with bike. Seemed to have more adjustment and wife liked the pocket in it.<O
    Air Cleaner. Put a free flowing one on.<O
    Crotch Cooler: Easy, good modification.<O
    Tank Protector: Bra mounted at rear of tank<O
    Tuner: Put a Power Vision on bike. As I am no tuner, took a while but I was able to get allot of improvement from motor. Seemed to wake it up in allot of areas. Also like the fact that I can mount the head on bike and use the gauge features. Also no need for PC Lap Top which I do not own.<O
    Bagger Bar: Mounted one to use to hold a large older style GPS and the head for tuner. No room for that stuff on stock bars with reverse buttons.<O
    Clarks very tall windshield: I prefer to look through shield. I find this shield being taller and wider than stock gives us both better wind and rain protection.
    Overall, really like the scooter. Yes, different than a two wheeler but still like it.<O
    At this time: Have mounted the Wards Parts Werks fans to bike. Have not been able to test in high heat yet as weather has been overcast and rain. Showing real promise.<O
    Dennis Swan<O
    <O

  2. #2
    850+ Posts rwhgme's Avatar
    Join Date
    Sep 2010
    Location
    Shawnee,Ks
    Posts
    872

    Default Re: Options and why

    Kuryakan Passenger armrests for my wife and
    lockable lowers with a cup holder for me!

  3. #3
    9750+ Posts Rod69's Avatar
    Join Date
    Dec 2011
    Location
    Lawrenceville Il. USA
    Posts
    9,689

    Default Re: Options and why

    Had retractable tour pack tether on, wife opened tour pack other day wind caught it, thether broke and now have new tour pack lid ordered. Broke at the front hinge.
    Bumper came on trike also: like it.
    Had 30 tooth sprocket put on: like
    Put Fatshots on: like
    Have Street Sleeper II on, more air: like
    Put Woods 555 cams in for needed power: really like
    Have tank bra: needed for scratches
    Have film on fenders and side pods: Didn't like scuff marks
    Put fender bras on, left film on fenders to protect paint: like
    Put matching floor board, grips, brake pad and so on.
    Put lifts on from Dennis, saving fatshots; really like!!!
    Lowered and tinted shield, like to see over it
    Passenger pegs for wife: wife likes
    Live to ride everywhere.
    Tour pack and trunk pouches: like
    winshield pouches; like
    Have more small stuff that everybody else has.
    Thanks for the Post Dennis.
    Rod69 Illinois TOI #900
    Joan71 Illinois TOI #901

  4. #4
    600+ Posts 427dave's Avatar
    Join Date
    Jan 2011
    Location
    The Villages, FL
    Posts
    641

    Default Re: Options and why

    1. Magnetic doors for lowers, no fussing with snaps

    2. V&H Power Duals header with stock mufflers

    3. Kuryakan vertical LED run/brake/turn lights on each side of trunk lid, more light is good

    4. Run/brake/turn light conversion to tour pak lights see above

    5. Arlen Ness K&N air cleaner, more air is good

    6. TTS tuner, makes it run better

    7. Dennis' lift kit, very good, no longer hit mufflers and handles better

    8. Dennis' tour pak relocator. wife likes more room and I can use backrest 2 up

    9. Other additional chrome, chrome is for safety.

    10. Rear bumper for looks and use.

    11. Windshield pouches, more storage easy to get to. Great for sunglasses etc.

    12. Eglidegoodies.com ultra brace tour pak metal arm for holding up tour pak lid.

    13. Cup holders for me and wife. One on handlebar other is mounted between speaker and tour pak for her.

    14. GPS with RAM mount, $99 dollar Garmin. Use a zip lock bag for waterproof kit. Had it on two other bikes.

    15. Kuryakan mud flaps.

    16. MT90 rear tire mounted on front reversed. More tread on pavement, handles better.

    17. Chrome rack mounted to tour pak. Can carry more stuff

    18. Adjustable rider backrest. Even use it with passenger. Absolute must for my back.
    Rear lift kit, and tour pak relocation, Road Zepplin Air seat, Chrome front forks, SE 120 ST engine, Headers by V&H, Stock mufflers, SE 259E cams, TTS tuner and SE Air Cleaner, 58 mm Throttle Body, Tank lift, Wind Deflectors, DIY Crankcase Breather, Floorboard Ext.

    Amateur Radio : W4WNG

  5. #5
    100+ Posts ttanthony's Avatar
    Join Date
    Jul 2012
    Location
    Dandridge, TN
    Posts
    126

    Default Re: Options and why

    Can you explain more about your lift Kit and tour pak relocator

  6. DKCustoms postbit
  7. #6
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Re: Options and why

    The folks with cup holder between speaker and TB / Have they worked out alright? Wife needs one.
    The lowers with magnet hold, have you also a cup holder mounted there? I had the frame mounted from Harley, not a fan of it, seemed to splill more than it held.
    Dennis

  8. #7
    1000+ Posts screwball's Avatar
    Join Date
    Apr 2011
    Location
    Santa Clarita, SoCa & Bullhead City, Az
    Posts
    1,175

    Default Re: Options and why

    Both trikes:

    1. Rush / Reinhardt slip-ons to make them louder... we like loud
    2. Harley Stage 1 intakes to compensate for the freer flowing mufflers
    3. Harley Re-map, generic upgrade, or what ever you call it to compensate for 1 and 2
    4. Shortie windshields because they look bitchen and we don't care about 'buffeting'
    5. Floor board extensions to move our legs farther from the rear exhaust header
    6. Extended break and shift levers to help with #5
    7. Adjustable back rests cause we are old
    8. Bumpers because they came with the trikes
    9. Huge foam hand grips, same reason as #7
    10. Oil Temp gages. I'm an engineer and I just gotta know
    11. Headphone jacks for the stereo so we won't bother anyone else riding with us
    12. Almost forgot clutch spring from a 96" engine so wife can pull the lever with her neuropathy
    http://www.triketalk.com/forum/custo...epic4494_1.gif
    Why 3 wheels?

    because 2 isn't enough and 4 is too many
    We are really Steve & Vesta Brown
    Her: 2014 Tri-Glide Me: 2015 Freewheeler
    Vietnam Vet 1967-68 U.S. Air Force

  9. #8
    500+ Posts Skeet7373's Avatar
    Join Date
    Feb 2012
    Location
    Dickson, TN
    Posts
    509

    Default Re: Options and why

    Quote Originally Posted by iaff84 View Post
    The folks with cup holder between speaker and TB / Have they worked out alright? Wife needs one.
    The lowers with magnet hold, have you also a cup holder mounted there? I had the frame mounted from Harley, not a fan of it, seemed to splill more than it held.
    Dennis
    Dennis, if she likes a 20 oz or 32 oz cup with lid, straw and protectors, the Butler cup is working great for me. I have mine mounted on the right side handlebar. It angles up so it clears the tank with no issues. Keeps ice in the cup for 4+ hours if ice from home, not the thin ice like at MickDee's. They make a mount for the back seat for a passenger. Butler - The Extreme Mug Holding System by Glass Act

  10. #9
    1750+ Posts Trent's Avatar
    Join Date
    Jul 2011
    Location
    Meridian, ID. USA
    Posts
    1,383

    Default Re: Options and why

    I have most everything that all of you above have..and then some...I put the new heavy duty chrome hinges on the tour pac lid the other day..did it myself.. kind scary drilling out the old rivets...but I did it and what a difference in the stability of the lid. No more rattling and shaking around and tighter fit when latched. I highly reccomend 'em. I am sure they added at least another 10 HP and improved the handling in the curves too. And they look much better than the old ones.

  11. #10
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Re: Options and why

    Quote Originally Posted by Trent View Post
    I have most everything that all of you above have..and then some...I put the new heavy duty chrome hinges on the tour pac lid the other day..did it myself.. kind scary drilling out the old rivets...but I did it and what a difference in the stability of the lid. No more rattling and shaking around and tighter fit when latched. I highly reccomend 'em. I am sure they added at least another 10 HP and improved the handling in the curves too. And they look much better than the old ones.
    Trent,
    We all know speed cost, just hard to figure how much we need to spend!
    Guess we can find it with allot of add ons
    Skeet, thanks for info.

  12. #11
    1750+ Posts Trent's Avatar
    Join Date
    Jul 2011
    Location
    Meridian, ID. USA
    Posts
    1,383

    Default Re: Options and why

    Haha!!! Well,,the parts guy at my dealer showed me a new thing coming out next month, and he said as soon as they saw it, they all thought of me. It is a heavier duty tourpac lock with a lid on it to keep the crap out. He told me I get the first one that comes in. Cant wait to install it and increase my fuel milage and higher end torque. It looks really good too.

  13. #12
    TheBobs
    Guest

    Default Re: Options and why

    Watch out for the retractable tourpac tether. If it starts to fray, it WILL fail. Mine did and I was very fortunate not to have any cracks.
    In addition to the stuff everybody already mentioned:
    I have hog trough drink holders on the lower fairings. Both sides. They were very handy on my cross country trip.
    Jerry's front fender mud flap, also very useful on my cross country trip.
    Russell Day Long seat, my feelings about it are well documented in a few threads!
    Mirror riser extensions. They are a must to help see over the top of the shoulders.
    Mustang passenger back rest. Longer arms make it a comfortable backrest.
    Wardspartswerks FCS fans. They rock!

    Wants:
    Bumper
    Jagg 10row fan assist oil cooler
    BAL-3 or similar LED tail lights
    LED fender light and turn signals
    Motolight LED caliper mounted driving lights.
    Better speakers and an amp

  14. #13
    50+ Posts
    Join Date
    Apr 2011
    Location
    CenCal
    Posts
    56

    Default Re: Options and why

    Some cosmetic and some performance related (the bike was a dog as delivered from the factory) on my ’09.

    1. Clear View 8” smoked windscreen. I can see over it but am still out of the wind.
    2. Bumper and rack on tour pack to improve looks.
    3. Decatted head pipe (mine’s a CA model).
    4. Vance & Hines mufflers with quiet inserts for stereo friendly sound.
    5. Stage 1 air filter and custom fuel map.
    6. Adjustable back rest. Pricey but it works.
    7. 1¼” lift brackets. Best mod so far.
    8. Air horn.
    9. Bushtec trailer hitch and harness.
    10. Redline V-Twin transmission oil with shockproof®. Not really a mod but a definite improvement.

    I'd like to change the bars to help with my bum shoulder.

  15. #14
    600+ Posts 427dave's Avatar
    Join Date
    Jan 2011
    Location
    The Villages, FL
    Posts
    641

    Default Re: Options and why

    Quote Originally Posted by iaff84 View Post
    The folks with cup holder between speaker and TB / Have they worked out alright? Wife needs one.
    The lowers with magnet hold, have you also a cup holder mounted there? I had the frame mounted from Harley, not a fan of it, seemed to splill more than it held.
    Dennis

    Kurakan cup holder between the tour pak and speaker has worked out great for passenger. I do not have a cup holder on my magnetic lower doors. That would not work as they hinge from the bottom. I have a cup holder mounted to the handle bars, can't remember brand but it works good on the reverse control side.
    Rear lift kit, and tour pak relocation, Road Zepplin Air seat, Chrome front forks, SE 120 ST engine, Headers by V&H, Stock mufflers, SE 259E cams, TTS tuner and SE Air Cleaner, 58 mm Throttle Body, Tank lift, Wind Deflectors, DIY Crankcase Breather, Floorboard Ext.

    Amateur Radio : W4WNG

  16. #15
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Re: Options and why

    As "trip" season is over for wife this year, I will look at these holders for her over winter.
    As I have a bagger bar now, guess I have plenty of room for my holder.
    Forgot to mention I also have Jerry's front fender mud flap.
    Thanks.


  17. DKCustoms postbit
  18. #16
    150+ Posts greyfang's Avatar
    Join Date
    Nov 2010
    Location
    Loveland, Colorado
    Posts
    197

    Default Re: Options and why

    Fuel moto's four item kit- ceramic coated headpipe, dyno tuned mufflers, stage 1 air box, and the PC V tuner. 1.25 rear lift kit and the tour box lift kit from Dennis. 10 inch Windvest wind shield. All mods very satisfied with although a 9 inch shield may have been a bit better. I can see over it but have to sit straight up. Probably better for my posture anyway lol.

  19. #17
    800+ Posts
    Join Date
    Aug 2011
    Location
    Evansville, IN
    Posts
    799

    Default Re: Options and why

    Quote Originally Posted by iaff84 View Post
    ...Forgot to mention I also have Jerry's front fender mud flap...
    Can you help me with some info about Jerry's mudflaps?
    As much as I don't really like mudflaps, one look at my oil cooler after a spit of rain made me realize that it doesn't matter if I like flaps or not, the TG needs them. Thanks for any help

  20. #18
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Re: Options and why

    Quote Originally Posted by 92fxsts View Post
    Can you help me with some info about Jerry's mudflaps?
    As much as I don't really like mudflaps, one look at my oil cooler after a spit of rain made me realize that it doesn't matter if I like flaps or not, the TG needs them. Thanks for any help
    Jerry will have to chime in here, have not heard from him in some time.
    Dennis

  21. #19
    800+ Posts
    Join Date
    Aug 2011
    Location
    Evansville, IN
    Posts
    799

    Default Re: Options and why

    Thanks for that info Dennis, maybe I could send a PM to Jerry. Could you tell me his user name on this forum.
    Thanks, Tom

  22. #20
    1000+ Posts
    Join Date
    Mar 2011
    Location
    Muncie, Indiana
    Posts
    1,057

    Default Re: Options and why

    Quote Originally Posted by 92fxsts View Post
    Thanks for that info Dennis, maybe I could send a PM to Jerry. Could you tell me his user name on this forum.
    Thanks, Tom
    Sorry, can not remember.

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Exhaust Options
    By hdchaplain in forum Harley Trike Conversions
    Replies: 12
    Last Post: 11-08-2013, 09:38 AM
  2. CSC Daytona options?
    By hobbs in forum California Sidecar Trikes
    Owners Forum
    Replies: 12
    Last Post: 11-06-2013, 03:05 PM
  3. Frankenstein Exhaust Options
    By Foodog2 in forum Harley Trike Conversions
    Replies: 6
    Last Post: 03-21-2013, 04:10 PM
  4. Cooling options
    By gamechngr in forum Harley Trike Conversions
    Replies: 12
    Last Post: 09-05-2012, 02:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •