My front wheel on my 09' ABS stallion does not sit square on the ground. It is tilted slightly to the right side. This appears to be caused by the rear suspension not being equal or balanced. For example, the frame just in front of the rear tire is 1/2" lower to the ground on the right side then it is on the left side. It is hardly noticeable from the rear, but there is no doubt that the front wheel is not flat on the ground. The tire is starting to show a bit more wear along the right side edge then the left side. (the trike has 6500 miles on it.) I am sure that handling is being effected, tire wear, as well as safety, and it bugs me. <br /><br />
<br /><br />
Some history: My trike has new ladder bars that were installed at the factory just before I took possession. I have checked the spring settings on all shocks and they are set equally. The air ride was repaired for being leaky at the factory, and holds air perfectly now.<br />
<br />
I have a lift in my garage and visually everything appears normal: nothing bent or broken that I can see.
<br /><br />
<br /><br />
I am very mechanical and fix anything with a little guidance from someone in the know. <br /><br />
<br /><br />
I am no suspension expert, and can take it that route if I have to.<br /><br />
<br /><br />
What is causing this?<br /><br />
<br /><br />
What do I need to do the level out my trike?<br /><br />
<br /><br />
Thank you.