Something Pet Carrier owners may want to try. I tack welded the mounting nuts to the flat bars. Drilled a taper in the flat bar opposite the nuts with a 1" drill. Replaced bolts with round head, hex drive ones. I use Blue Loctight on the bolt threads. I have several thousand miles on my carrier with this mounting without any problems. Makes mounting and removing the carrier a lot easier.
Remember--It is never the issue but rather how we react to the issue is the issue.
http://www.buggy.com/
07 VTX 1800 w/Champion Trike Conversion
[SIGPIC][/SIGPIC]
Please let me know when the hard cover is available.
I'm also working on trim to cover the interior felt lining edge where it meets the fiberglass body. I'll let you know what I come up with.
My dog seen one of these while riding in the cage.She gave me one dirty look.
I have two black ones in stock of the original pet cruisers---we have a new style now so can make a deal with someone on these two
Motorcycle Trike Pet Carrier
Remember--It is never the issue but rather how we react to the issue is the issue.
http://www.buggy.com/
07 VTX 1800 w/Champion Trike Conversion
[SIGPIC][/SIGPIC]
I forgot to tell you that I put fender washers between the round head, hex drive bolts and the carrier plywood floor.
Any thoughts on helping me out with the shipping damages to my carrier?
Al Guild
Griffin, Ga. 30224
Remember--It is never the issue but rather how we react to the issue is the issue.
http://www.buggy.com/
07 VTX 1800 w/Champion Trike Conversion
[SIGPIC][/SIGPIC]