Can anyone with a Motortrike IRS tell me what size of wrench I need to bleed the brakes. Have not done any brake work on this trike except according to the installer, I was told the front pads were worn and should be replaced. They had lotsa life left but thought lets start fresh.
Any way the pedal seems spongeey and after two pumps I notice a difference so thought I would bleed them to make sure.
There appears to be 3 bleed screws per side me thinks I want to start with the upper one first then make my way down. Let me know your thoughts on this as I would like to make sure I have max breaking power.