Pinch Bolts On EZ Steer Kit Missing

[gr8phun]

Have a 2013 Hannigan Kit installed by dealer in Jan this year
With an EZ Steer kit installed with a 6.0 or 6.5 degree rake

Missing two of four pinch bolts on the bottom that hold the forks

1.) What size are the bolts..............Just Got'em at Ace M8X125
2.) torque
3.)Do I need to adjust the lenght on the Forks

[Blackwillow]

You absolutely need to get back to your dealer on this. Am having issues with my dealer on install and hoping the manufacturer is coming to my rescue to resolve these issues. I went for a ride yesterday and found a young couple pulled over their passenger tire front missing ( no bolts in sight) and on the side of a serious down grade they just had, after a brief conversation just had a break job done less then a week ago. Me thinks the Mech did not torque the lug bolts. These kids got real lucky where they ended up, could have been much worse.

[gr8phun]

went to Ace Hardware

The bolts are M8X125
Got them

Looks like the lower pinch bolts should be torqued to 21 lbf-ft

[gr8phun]

Run a M8X125 nut on the bolts to clean up the threads

Put the bolts in and torqued them up

If I crash and burn it will either be because of the new bolts or
the Belly pan