Do I have to pull the clutch to replace the compensator

[engprosinc]

I am considering changing the compensator on an 05 HD Ultra trike with a SE 103 twin. Do I have to pull the clutch, too?

I've seen a YouTube video where the mechanic didn't have to pull the clutch, only the adjuster. If so, I just might decide to do the install myself and save some money, too.

 

[trikermutha]

Depends how stretched out your chain is and the compensator..you Still may need to pull the clutch. Once you open up the primary you will find out fast.

 

[cc]

I did not pull my clutch when I replaced mine 20,000 miles ago.

 

[Gorilla]

Better check the fitment I do not believe the SE compensator will fit your 05. It is designed for the 06 dyna and 07 and newer

 

[msocko3]

Better check the fitment I do not believe the SE compensator will fit your 05. It is designed for the 06 dyna and 07 and newer

You are 100% correct, the SE compensator will only fit 06 to present Dyna & 07 to present Touring. The old style compensator doesn't have the issues the newer ones do.

 

[engprosinc]

Better check the fitment I do not believe the SE compensator will fit your 05. It is designed for the 06 dyna and 07 and newer

Yes, I believe you are correct.
I assumed my 103 was a complete SE engine, but instead the HD stock engine was bored out, the cams and heads were replaced to create the 103. It appears as if I have a hybrid on my hands. I don't know if that is good or bad...maybe a mix of both.
There is no compression release that I can see, so I doubt if they were installed.
The trike goes to the shop today for them to look see. All I know it will most likely cost alot of $.
Thanks for your reply.