Today I added the floor board extenders and the Comfort lift, not very had at all to install, great directions and video. Went for a 50 mile ride and what a differance, less bumps and much eaiser to steer. Thanks DK
Today I added the floor board extenders and the Comfort lift, not very had at all to install, great directions and video. Went for a 50 mile ride and what a differance, less bumps and much eaiser to steer. Thanks DK
Last edited by DK Custom Products; 02-23-2020 at 05:45 PM.
Those fairing bags are the bomb for sure. Put them on my '17 CVO Limited in September 2016. Then I transferred them to my '18 TG and now my '20 TG. They are great for holding small items. Kevin I've not tried them for glasses but I don't think they are quite big enough. I'll have to check that out. In any case it's no problem finding things to fit in them. Wouldn't want to be without.
Yesterday and today I've been working on my new Aluma TK1 trailer. I picked the trailer up last Monday, February 17th, and the weather has been sucky since then. But yesterday I did get the chock installed - a Wheel Dock. Yeah I know it's probably overkill but I really, really like the Wheel Dock and wanted it in the trailer. Then I installed some X-Track rails along the side so I can tie it down to keep it from any possibility of moving side to side. I'll try and get some photos in the next few days.
Just add A few new parts like.
S&S TC3 Oil Pump & Cam plate Kit S&S 557 Cam Kit S&S Hydraulic Cam Chain Tensioner S&S CAM BEARING S&S Complete Push rod Kit Cometic AFM Series Cam Cover Gasket
and finally replaced the header pipe with Vance Hines power duals form Keven. Thanks man!
Now all I need is a nice day to brake it all in!!!
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.
I completed the installation of the Wheel Dock chock and the X-Track rails in my new Aluma TK1 trailer over the weekend. Yesterday it was raining all day so today I had an opportunity to take it out for a shake down cruise over city streets, two lane county roads and oh yes, interstates. I am really impressed with the quality of this trailer and how well it pulls. I hardly know it's back there. And my wife is the one who noticed that it was less than half the price of our most recent (in April 2007) Bushtec pull behind trailer. In any case our trailer pulling with the motorcycle / trike are over and we're entering a new era where we'll pull the trike to our destination . . . that is when we're going on a destination ride and plan to stay in the area.
Here are a few photos:
Yeah, I know . . . it's probably overkill with the chock and strapping. But I don't want nuthin' falling off there, lol.
Well that is a fine looking trailer and trike. You are going to love the TK1. Looks just like mine except I don't have the X track yet, but I think I will add them. I did mount my spare up front on the tongue about 1/2 inch from the box.
I saw a lot of post a couple of years ago where some guys said the side mounted tire throws a lot of rain water coming off the tow vehicle up on the side of the trike. Congrats on the fine looking combo!
BTW, what size and type screws/nuts etc. did you use on the X Track install. That is a lot of hole drilling.
16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.
Screws are 1/4-20 x 1. I used a fender washer and lock washer also. Yeah it is a lot of holes - 48 per each track. Yikes.
CORRECTION: 24 screws per each 2 foot long rail. 48 screws in all.
Thanks for the info about the spare tire. I just mounted it where I saw some photos on the Aluma website. If it's a problem I can definitely move it.
So I was thinking about Zook doing the rake kit on my Tri in April. I got the bug up my b$tt to see if he could swap out the bars for a set of the Khrome Worx 2+2 sweeps ... don’t care if the wires are internal or not, more into the function. Randy is looking into what it’s gonna take.
I figured while he had the faring off ... what the hay... might as well get it all done at once. I was worried about scheduling it, but, as usual, Randy was very accommodating.
He’s so good at customer service. Even when the customer is a pain like me
Vintage 09' Vivid Black, Boyesen X force intake, DK Customs DIY external breather, PV tuner, Mighty Mite love Jugs,Titanium Wrapped Header pipe, Khrome Werks 2+2 Wide Sweepers, DK 2" tank lift deluxe, Air Deflectors, Rear Bumper, Fender Chrome trim, Kuri. Rear lights, 9" LRS recurve flat top wind screen, LED headlight and spots, Hubcaps rear wheels
Ultrafxr, very nice looking trailer/trike. I really like the look of the mudflaps.
"No matter what you ride, give respect to get respect"
2016 Billet Silver/Black Tri Glide
Yesterday the ride to and from work was in the balmy 50's.
This morning, it was 40 degrees...not bad, except it start sleeting about halfway here. brrr.
Just went out and covered my seat cause now it is up to a whopping 41 degrees, but it has started raining. Rain should stop before heading home later today.
Kevin
I went out in the garage & LOOKED at mine. Have not got to ride it yet !!! We brought it home in the trailer. Then the couple days it was clear but cold, I was sick. Now I'm better & it is 34* & snowing. crap Their saying maybe 2"
2020 TriGlide Tahitian Teal aka (Hawaiian Hussy). Avon frt & Comfortred rear tires. ProAction frt & rear susp. RZ seat. DK floorboard extension & rear axle retainer kit with EBS, HD pull -back bars. Custom Dynamics front turn signals & Vent grill. All ,HD "Edge Cut " accessories.