What did you do to Your Tri-Glide Today?

[ultrafxr]

I went out in the garage & LOOKED at mine. Have not got to ride it yet !!! We brought it home in the trailer. Then the couple days it was clear but cold, I was sick. Now I'm better & it is 34* & snowing. crap Their saying maybe 2"

Yuck. Keep it up there please!

Heck I've only got 228 miles on mine and 130 of that was the ride home from the dealer where I purchased it on December 31, 2019. Got to take it out one time before my knee replacement surgery a week later. And it took me several weeks before I was able to get on it and I've only been out for a couple short rides due to the cold and rainy weather. Soon, very soon it'll be much nicer and we'll be on the road again.

And Bill I hope it warms up enough for you to ride your new TG very soon.

[PosseRider]

Hope it is Sooner than Later, Jerry. Glad you are doing well after the surgery. Cya in K-ville even if I have to tow it from Ohio. I van break it in down there.

[ultrafxr]

Hope it is Sooner than Later, Jerry. Glad you are doing well after the surgery. Cya in K-ville even if I have to tow it from Ohio. I van break it in down there.

[FuzzyWuzHe]

I completed the installation of the Wheel Dock chock and the X-Track rails in my new Aluma TK1 trailer over the weekend. Yesterday it was raining all day so today I had an opportunity to take it out for a shake down cruise over city streets, two lane county roads and oh yes, interstates. I am really impressed with the quality of this trailer and how well it pulls. I hardly know it's back there. And my wife is the one who noticed that it was less than half the price of our most recent (in April 2007) Bushtec pull behind trailer. In any case our trailer pulling with the motorcycle / trike are over and we're entering a new era where we'll pull the trike to our destination . . . that is when we're going on a destination ride and plan to stay in the area.

Here are a few photos:

Attachment 83761Attachment 83763Attachment 83762Attachment 83764Attachment 83765

Yeah, I know . . . it's probably overkill with the chock and strapping. But I don't want nuthin' falling off there, lol.

Sweet rig ... always liked the TK1 ... light weight and well built ... my home made is well built, but not so light ... LOL.

[DK Custom Products]

Started snowing on me on the ride home a few minutes ago. Gonna be in the low 20's tonight. Pretty sure I'm going to hitch a ride in the truck tomorrow with Mary.

Kevin

[ultrafxr]

Started snowing on me on the ride home a few minutes ago. Gonna be in the low 20's tonight. Pretty sure I'm going to hitch a ride in the truck tomorrow with Mary.

Kevin

Good thinking.

[TonkaDriver]

Finished the spring cleaning and installation of the ProAction Shocks and reverse motor. I have only been able to put a couple of miles on them. Next Monday or Tuesday I am going to Attack the Cut-off to see how they really feel. Should be fun.

Kurt

[prariepilot]

Been snowing for the last 18 hours. Not much to do but think about the approaching riding season for us northerners! But, progress is being made in the "upgrades" on Big Red ('13 TG)! Ordered the Pro Action Shocks and Bearing Retainer Plates kit from DK this morning.

Yes, Progress!

[prariepilot]

Been snowing for the last 18 hours. Not much to do but think about the approaching riding season for us northerners! But, progress is being made in the "upgrades" on Big Red ('13 TG)! Ordered the Pro Action Shocks and Bearing Retainer Plates kit from DK this morning.

Yes, Progress!

Talk about Progress! An email came in from DK Custom Products at 12:13pm stating my order had been shipped! Maybe four hours from time of order to shipping email. Pro-Action Shocks setup for my '13 TG and the Bearing Retainer Plates Kit. Talk about service! There's not another aftermarket motorcycle parts supplier that responds to its customers like DK does. Thanks to Kevin and Devin and the rest of all y'all that make things happen at DK!

[FuzzyWuzHe]

Talk about Progress! An email came in from DK Custom Products at 12:13pm stating my order had been shipped! Maybe four hours from time of order to shipping email. Pro-Action Shocks setup for my '13 TG and the Bearing Retainer Plates Kit. Talk about service! There's not another aftermarket motorcycle parts supplier that responds to its customers like DK does. Thanks to Kevin and Devin and the rest of all y'all that make things happen at DK!

Them guys are lightening fast ... always amazes me.

[DK Custom Products]

Finished the spring cleaning and installation of the ProAction Shocks and reverse motor. I have only been able to put a couple of miles on them. Next Monday or Tuesday I am going to Attack the Cut-off to see how they really feel. Should be fun.

Kurt

That Cut-off is truly a unique road. Looking forward to hearing how you like it with the new set-up.

Kevin

[cowboy472]

Ha Jerry it time for a new Avatar with that sharp looking Machine!

[ultrafxr]

Ha Jerry it time for a new Avatar with that sharp looking Machine!

I agree. But I can’t figure out how to change it.

[hardwickbv]

Picked up the 17 TG from the shop, took it in because the reverse quit working.

They rebuilt the reverse motor under extended warranty.

Brought it home put it in the barn and changed fluids in all 3 holes, cleaned the outlaw oil filter, removed the tank and replaced the spark plugs.

Tomorrow I will install ThunderVolt 50 Black Spark Plug Wires that I picked up from DK Custom after Christmas.

Also need to put my EBS with DK Custom Catch Can back on.

Have the Kuryakyn bags to put on the lowers and Ciro Bat Wing lights to install but probably going to wait for warmer weather for that.

Bob

[MDO]

Picked up the 17 TG from the shop, took it in because the reverse quit working.

They rebuilt the reverse motor under extended warranty.

Brought it home put it in the barn and changed fluids in all 3 holes, cleaned the outlaw oil filter, removed the tank and replaced the spark plugs.

Tomorrow I will install ThunderVolt 50 Black Spark Plug Wires that I picked up from DK Custom after Christmas.

Also need to put my EBS with DK Custom Catch Can back on.

Have the Kuryakyn bags to put on the lowers and Ciro Bat Wing lights to install but probably going to wait for warmer weather for that.

Bob

Sounds great...you are gonna love those spark plug wires. They are 1 of the best upgrades I made.

[ultrafxr]

Whoo hoo. It got up to the low 70s here today and the DW and I went for a 150 mile lunch ride with out local HOG Chapter. Great to be in the wind . . . and I mean that literally as the wind was gusting to over 30 mph . . . but it was fun. And my new right knee was just fine . . . much better than before the surgery.

[FuzzyWuzHe]

Built a mount for the Zumo that fits on the Ciro Dash mount and can be powered from the USB port ... just incase ...

[Rider70]

New Rekluse clutch, DK comfort lifts and 14” Pro Action shocks.

All set set for the 1200 mi ride to DAYTONA😄😄9

OMG. rides like butter now. What a difference. Was going with legend but contacted DK and they gave me solid reasons why, legends are great for two wheel, trikes are a different animal, and that coil over shocks would be better, not to mention much less $$. So glad I listened. Bumps? What bumps?

The Rekluse is amazing. No more clutching exercise in traffic.

Labor done by my favorite techs. My two sons who will be riding with me To Bike Week. 😁

[PosseRider]

Whoo hoo. It got up to the low 70s here today and the DW and I went for a 150 mile lunch ride with out local HOG Chapter. Great to be in the wind . . . and I mean that literally as the wind was gusting to over 30 mph . . . but it was fun. And my new right knee was just fine . . . much better than before the surgery.

You were lucky. Finally got to ride the Teal. Only 52 here with STRONG winds. We did about 80 miles, I was going for 100 but Janiene got too cold. Maybe another day this week,although more wet stuff in the forecast. Not sure about the shocks. Stopped once & wound them down a bit. Believe I spoiled Janiene with the Pro shocks. Going to adjust again. If it does not warm,she said we will trailer down. 1300 from here.

[hardwickbv]

Installed the ThunderVolt 50 Black Spark Plug Wires.

Got the tank back on then went for a ride to get some gas. Really can tell the difference in the response I get when I roll the throttle on.

Another great product sold by DK Custom!!!

Put my EBS with DK Custom Catch Can back on then was able to get the Kuryakyn bags to put on the lowers.

Still have the Ciro Bat Wing lights to install, may get those on tomorrow.

Bob