What did you do to Your Tri-Glide Today?

[desertclassic]

Tell me about the oil filter relocation, please.

Sorry I haven't got back to you about the install. My grandson had heart surgery and I have a bit busy and didn't get the exhaust back on yet.

The install is not hard, but takes a little effort to put it together. The most difficult for me was hoses on the filter adapter. Just a little close for old hands. After installing the bottom hose, I made a trip into the kitchen and borrowed the dishwashing liquid. Just a drop around the connector threads made it easy. Don't over do it, don't want bubbles in the oil. I was also doing the floorboard extensions so I got those things out of the way and it made life easier. I hope to get the exhaust on this week and run this thing up.

The grandson is doing great and should be home in about 2 weeks. That will take us out of the caretaker mode for the other grandchildren. Man it was not this hard when our kids were small. Jim

- - - Updated - - -

I was going to do the filter relocation and cooler also on my 2014 and my dealer said a no no for warranty ! So be cautious if you are concerned about Harley warranty . Ebert

I do know that could be an issue at some dealers. The guys here in Las Cruces have never been a issue and are excited to see the final product. They were super impressed with the tank and comfort lift.

I have bought 4 different bikes from the dealer and sent them 11 buyers. I do believe that it helps to have a good relationship with the dealer. Jim

[rhino 2]

I was going to do the filter relocation and cooler also on my 2014 and my dealer said a no no for warranty ! So be cautious if you are concerned about Harley warranty . Ebert

Don't ask -Don't tell.... Ive said this many times before... Just by asking the dealer if this will void the warranty ; Will void the warranty.....

[DK Custom Products]

Finished my once a year thorough wash, wax and shine on the Tri-Glide. Took it outside to take some pics, and it was cloudy....took a few anyway, and put it back inside.

It's going to rain tomorrow, so I will be riding the Softail, keeping the TG inside until a sunny day.

It won't be this clean again for another year, and I want to get some good pics.


Here's a few pics I took today-










Kevin

[consitter]

Wow, that thing looks beautiful!!

I really like how the custom pinstriping stands out. Especially the writing on the tank.

[Texan]

Installed my 1 1/2" tank lift and rear tank lift kit this weekend. Wish I'd gotten the 2" kit now that I got it finished, but really like the look. Think this is the first time I've been able to clean the rocker boxes on a stock bike.

8~\o

[bronxbill]

Installed the RJS Originals polished Stainless wheel inserts. Contrasts well against the powder coated wheels

Before After

[clint44]

I like what you did with your rear wheels,Bill,especially the three spoke spinners. Where did you find those?

[1dn5up]

Nice touch Bill, definetly inhances the wheel--I liiiike it.👍

[MB1953]

Finished my once a year thorough wash, wax and shine on the Tri-Glide. Took it outside to take some pics, and it was cloudy....took a few anyway, and put it back inside.

It's going to rain tomorrow, so I will be riding the Softail, keeping the TG inside until a sunny day.

It won't be this clean again for another year, and I want to get some good pics.


Here's a few pics I took today-










Kevin

Looking good, Kevin! What header are you running?

[DK Custom Products]

Looking good, Kevin! What header are you running?

Thank you!

Power Duals, they are a 2-1-2 header. You can see more on them HERE

Kevin

[bronxbill]

I like what you did with your rear wheels,Bill,especially the three spoke spinners. Where did you find those?

Clint, they are a stock Kuryakyn item

[graygoat]

Got all the bugs off! Then put on the HD rear fender chrome trim. Ordered the new DK air deflectors & floorboard extensions. When I put the extensions on I will remove the heel shifter ( just can't get to liking that thing after 2000 miles). Ordered a Kury spacer and will move the toe shifter to the outside and see how I like that.

[Zammy]

Took the trike in for the 5K checkup and fluid changes, also ordered the new DK air deflectors, should have the bike back tomorrow, waiting for the email from DK that the deflectors shipped.

[Zammy]

Wards fans up and running yesterday.

[graygoat]

Finally a nice day here today, rode about 60 miles. When I got home my DK air deflectors and floor board extensions were here. GREAT SERVICE from DK! So I put them all on. Only issue was the 2 top bolts on the left side floorboard were a bitch to get out. Moco must have used some type of gray/white thread locker and torqued the hell out of them. Had to tap them with a hammer and took all I could do to get them out with a short breaker bar. Install went much easier! My Kury heel shift eliminator also came today, so I am toe shift only now. Test ride tomorrow!

[graygoat]

Got a 50 mile test ride in today. Really like the floor board extensions (knees are more comfortable). Windy here today, but do think I have less chin whisker lift with the air deflector/tank lift combo. Well satisfied.

[rhino 2]

I got tired of the slop in the shift lever rod, So last night i took the rod and lever off by removing the allen bolt [1/4 in +3/8] the bolt was pretty well grooved where it clamps on the trans shaft. So today i got a new one from my local hardware store, Aren't too many of them around anymore....
Now the rod is tight as a drum....

[clint44]

I got tired of the slop in the shift lever rod, So last night i took the rod and lever off by removing the allen bolt [1/4 in +3/8] the bolt was pretty well grooved where it clamps on the trans shaft. So today i got a new one from my local hardware store, Aren't too many of them around anymore....
Now the rod is tight as a drum....

Ours was a little sloppy too and I wanted something a little more spiffy.
http://www.arlenness.com/images/19_913_02L.jpg

[dartref]

First 1000 mile service over the weekend, just in time to get it back and let it sit while the rains come this week.

[DK Custom Products]

Mary and I rode into Memphis this evening. It was a nice 100 mile round trip ride, a really good break from too many hours at the computer and turning wrenches for the last week!

Went to see the movie "A Story Worth Living". It was pretty good...not as much motorcycle riding as I thought it would be, but still pretty good.

Here's a trailer of it-





Kevin