What did you do to Your Tri-Glide Today?

[Jack Klarich]

I take it that the free battery location is the same as on tie tri. I made 2 loop pulls using crimp terminals. Then secured one to + and the other to - . Pull out old bat , install new . No finger pinching required .

Yes it is under the seat, the grab strap on the battery had slipped all the way under the battery and was trapped, we live off a really bad bumpy road, that I am sure jarred the battery loose

I got it out and fixed the strap and made sure the battery was secured and cleaned and tightened it also

[1dn5up]

Yes it is under the seat, the grab strap on the battery had slipped all the way under the battery and was trapped, we live off a really bad bumpy road, that I am sure jarred the battery loose

I got it out and fixed the strap and made sure the battery was secured and cleaned and tightened it also

After thought , I should have made a strap around it with a velcro strip be fore install . Oh well , next time .

[New Orleans Kevin]

50 miles to get home from somewhere 13 miles away 😜

[Rogue1]

I took the Tri Glide over 100 miles an hour. There's a new bypass on highway 64 that goes around Asheboro. It's been open for three or four years now. There's a stretch of about a mile and a half of gently rolling hills and really straight.

When I reached that point in the highway I was already doing 70 so it wasn't a big jump. Four lane with no traffic in either direction. My right wrist just rolled back and I said let's see what it'll do. When I reached 101 I rolled off the throttle. I'm not surprised at the speed but I'm very surprised at the lack of vibration and the smooth ride at that speed.

I felt no more vibration than I did at 30 or 50 miles an hour. No distortion in the mirrors and just as smooth as could be. I use the dynamic bead balancing system in the wheels and it really works. I was quite pleased.

[rhino 2]

I took the Tri Glide over 100 miles an hour. There's a new bypass on highway 64 that goes around Asheboro. It's been open for three or four years now. There's a stretch of about a mile and a half of gently rolling hills and really straight. When I reached that point in the highway I was already doing 70 so it wasn't a big jump. Four lane with no traffic in either direction. My right wrist just rolled back and I said let's see what it'll do. When I reached 101 I rolled off the throttle. I'm not surprised at the speed but I'm very surprised at the lack of vibration and the smooth ride at that speed. I felt no more vibration than I did at 30 or 50 miles an hour. No distortion in the mirrors and just as smooth as could be. I use the dynamic bead balancing system in the wheels and it really works. I was quite pleased.

The most I had my Triglide up to was about 90/95….Then my need for speed was over come by my fear of death 💀 …Then I backed off to 70/75 And even at those speeds things can and do come up way too fast…And can bite you.!That said it is nice to see how much guts the 114 has..

[Rogue1]

The most I had my Triglide up to was about 90/95….Then my need for speed was over come by my fear of death 💀 …Then I backed off to 70/75 And even at those speeds things can and do come up way too fast…And can bite you.!That said it is nice to see how much guts the 114 has..

I don't have a need for speed either. This was just a one time thing. Shit hits the fan pretty quick at that speed. I have 32000 adult miles on the bike. But I have to say it was pretty cool.

[Zammy]

Today was knuckle busting work on the chrome day, we're about 2 miles inland from the salt water but have to really keep after it.

[DK Custom Products]

Today was knuckle busting work on the chrome day, we're about 2 miles inland from the salt water but have to really keep after it.

Looking Great!

Almost worth it to ride out, buy you both dinner, to have that level of cleaning done to my ride.

Kevin

[New Orleans Kevin]

Today was knuckle busting work on the chrome day, we're about 2 miles inland from the salt water but have to really keep after it.

Try some of this next time on the chrome.

https://www.amazon.com/Wizards-Metal.../dp/B005ZGSCYA

[PosseRider]

lunch ride with 2 others on back roads of Ohio. over 200 miles. 1st ride this year . Back held up but sore today. Thanks Steve

[rhino 2]

I Changed the batteries in the PODS…..Last week I had a message scroll across the screen twice that I’ve never seen before….??? and it said Low POD battery……Put in new batteries and all is good..👍

[Zammy]

We had really nice weather yesterday and had a good 111 mile breakfast run. However by the time we got home the love bugs were out , what a mess, it took both of us an hour to clean those buggers off. It looks like we will put the bike away for about 2 weeks till they're done with mating season.

[rhino 2]

The temps went up to 85º, Today so i

Opened all the vents on my Leather Motorcycle Jacket...And all the vents on the trike....First time they been open since Dec..It really helps to cool me down especially at speed..

[1dn5up]

We had really nice weather yesterday and had a good 111 mile breakfast run. However by the time we got home the love bugs were out , what a mess, it took both of us an hour to clean those buggers off. It looks like we will put the bike away for about 2 weeks till they're done with mating season.

I thought that supper slippery nano coating was to make the bugs just slide off

[rhino 2]

I thought that supper slippery nano coating was to make the bugs just slide off

Only at speeds in excess of 101 miles an hour..And riding in the opposite direction of the sun..!🌞

[Zammy]

Frank, those little buggers are very acidic and will ruin even a good paint job if you don't get them off right away. When we're riding 50 mph on the back roads you don't realize how many your taking for a ride. I've got a good coat of sealer on the front surfaces but they're still tough to get off.

[1dn5up]

Frank, those little buggers are very acidic and will ruin even a good paint job if you don't get them off right away. When we're riding 50 mph on the back roads you don't realize how many your taking for a ride. I've got a good coat of sealer on the front surfaces but they're still tough to get off.

Then all those setting fire on the hood after a super protected ceramic treatment comercials are bogus !

Ill stick to old DuPont #7 .

[New Orleans Kevin]

Changed out the air filter to a clean one , then cleaned the other one.