150 Most Recent Posts

Thread AuthorPostersPost AuthorForumThread/Post Link
TomyJ7TomyJHome Built TrikesShenanigans
dthorn8dthornHarley Tri Glide2024 Tri Glide front axle nut torqu...
dthorn8rhino 2Harley Tri Glide2024 Tri Glide front axle nut torqu...
MDO101rhino 2Harley Freewheeler /...What Did You Do To Your Freewheeler...
TomyJ7Jack KlarichHome Built TrikesShenanigans
Vin4Jack KlarichHarley Tri GlideCold Engine Revs High When Starting
MDO101Jack KlarichHarley Freewheeler /...What Did You Do To Your Freewheeler...
dthorn8Rogue1Harley Tri Glide2024 Tri Glide front axle nut torqu...
MDO101DK Custom ProductsHarley Freewheeler /...What Did You Do To Your Freewheeler...
diferg3Motorcycle MikeChampion TrikeChampion irs banging noise on bumps
Kneesinbreeze5My TurnHarley Freewheeler /...Hiway pegs without installing crash...
MDO101LD-OrdieHarley Freewheeler /...What Did You Do To Your Freewheeler...
diferg3difergChampion TrikeChampion irs banging noise on bumps
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
dthorn8Dan SCHarley Tri Glide2024 Tri Glide front axle nut torqu...
Vin4Dan SCHarley Tri GlideCold Engine Revs High When Starting
Rogue15Dan SCHarley Tri GlideOil pressure gauge.
HDUSA113ol' schoolNew Member Introduct...New to Trike Talk
diferg11ol' schoolNew Member Introduct...Hello from Southeast Georgia U.S.A
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
scuzzi4scuzziHarley Tri GlideTri Glide extended reach seat
DK Custom Products362New Orleans KevinHarley Tri GlideWhat did you do to Your Tri-Glide T...
Vin4rhino 2Harley Tri GlideCold Engine Revs High When Starting
diferg3Marc HChampion TrikeChampion irs banging noise on bumps
Vin4VinHarley Tri GlideCold Engine Revs High When Starting
Frisco5Marc HCalifornia Sidecar T...Side pod door open signal
TomyJ7TomyJHome Built TrikesShenanigans
diferg3Motorcycle MikeChampion TrikeChampion irs banging noise on bumps
diferg3difergChampion TrikeChampion irs banging noise on bumps
diferg11Uncle FesterNew Member Introduct...Hello from Southeast Georgia U.S.A
JohnnyVDA13Uncle FesterNew Member Introduct...Hello I am from Belgium
jef_nik20002jef_nik2000Lehman TrikeMonarch 2 center cap removal proced...
jef_nik20002Papa ZookLehman TrikeMonarch 2 center cap removal proced...
jef_nik20002jef_nik2000Lehman TrikeMonarch 2 center cap removal proced...
jef_nik20002Papa ZookLehman TrikeMonarch 2 center cap removal proced...
Tritek4stancotreauLehman TrikeAvoid buying a Lehman?
Rogue15Jack KlarichHarley Tri GlideOil pressure gauge.
jef_nik20002jef_nik2000Lehman TrikeMonarch 2 center cap removal proced...
Tritek4Papa ZookLehman TrikeAvoid buying a Lehman?
gfaltersack8DK Custom ProductsHarley Tri GlideDK Customs remote oil filter kit in...
Kneesinbreeze5Noodles107Harley Freewheeler /...Hiway pegs without installing crash...
Rogue15Old Road DogHarley Tri GlideOil pressure gauge.
Tritek4TritekLehman TrikeAvoid buying a Lehman?
Burnerboy11rhino 2Can Am Spyder Trike...How many of you ride a Can Am spyde...
JohnnyVDA13Phu CatNew Member Introduct...Hello I am from Belgium
ZZMACH114BrokenBackJackHarley Tri GlideNew Member Hello from NH
diferg11BrokenBackJackNew Member Introduct...Hello from Southeast Georgia U.S.A
JohnnyVDA13BrokenBackJackNew Member Introduct...Hello I am from Belgium
JohnnyVDA13Papa ZookNew Member Introduct...Hello I am from Belgium
Frisco5FriscoCalifornia Sidecar T...Side pod door open signal
ctdair9Jd1aHarley Tri GlideHot Rotors After New Pads
Frisco5FriscoCalifornia Sidecar T...Side pod door open signal
JohnnyVDA13Jack KlarichNew Member Introduct...Hello I am from Belgium
diferg11Jack KlarichNew Member Introduct...Hello from Southeast Georgia U.S.A
ZZMACH114SullyHarley Tri GlideNew Member Hello from NH
diferg11SullyNew Member Introduct...Hello from Southeast Georgia U.S.A
Kneesinbreeze5pigfoot63Harley Freewheeler /...Hiway pegs without installing crash...
AriNV14KneesinbreezeNew Member Introduct...New to trike
Burnerboy11KneesinbreezeCan Am Spyder Trike...How many of you ride a Can Am spyde...
TXFIRE766BurnerboyHonda TrikesNew to Trikes and needing a convers...
smokey_mountain2BurnerboyAccessoriesJ&S Moto conversion to Trike Li...
Frisco5BurnerboyCalifornia Sidecar T...Side pod door open signal
Frisco5ol' schoolCalifornia Sidecar T...Side pod door open signal
ZZMACH114trike ladyHarley Tri GlideNew Member Hello from NH
JohnnyVDA13trike ladyNew Member Introduct...Hello I am from Belgium
diferg11trike ladyNew Member Introduct...Hello from Southeast Georgia U.S.A
diferg11rhino 2New Member Introduct...Hello from Southeast Georgia U.S.A
diferg11GorillaNew Member Introduct...Hello from Southeast Georgia U.S.A
ZZMACH114Marc HHarley Tri GlideNew Member Hello from NH
Frisco5Marc HCalifornia Sidecar T...Side pod door open signal
DK Custom Products3621dn5upHarley Tri GlideWhat did you do to Your Tri-Glide T...
diferg11Marc HNew Member Introduct...Hello from Southeast Georgia U.S.A
diferg11ZammyNew Member Introduct...Hello from Southeast Georgia U.S.A
Bloke10Marc HNew Member Introduct...Hello from Uttoxeter UK
JohnnyVDA13Marc HNew Member Introduct...Hello I am from Belgium
Kneesinbreeze5ZammyHarley Freewheeler /...Hiway pegs without installing crash...
diferg11difergNew Member Introduct...Hello from Southeast Georgia U.S.A
Phill Griggs2ZammyTrike TravelPIE-PIE & PIE
DK Custom Products362ZammyHarley Tri GlideWhat did you do to Your Tri-Glide T...
Bloke10ZammyNew Member Introduct...Hello from Uttoxeter UK
JohnnyVDA13ZammyNew Member Introduct...Hello I am from Belgium
Frisco5rhino 2California Sidecar T...Side pod door open signal
Frisco5FriscoCalifornia Sidecar T...Side pod door open signal
Rogue15rhino 2Harley Tri GlideOil pressure gauge.
JohnnyVDA13hardwickbvNew Member Introduct...Hello I am from Belgium
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
ZZMACH114hardwickbvHarley Tri GlideNew Member Hello from NH
Kneesinbreeze5KneesinbreezeHarley Freewheeler /...Hiway pegs without installing crash...
Rogue15rhino 2Harley Tri GlideOil pressure gauge.
ctdair1ctdairHarley Tri GlideFixed Switch
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
Rogue15Old Road DogHarley Tri GlideOil pressure gauge.
Davep13GorillaNew Member Introduct...Hello from the mountains
ZZMACH114GorillaHarley Tri GlideNew Member Hello from NH
HDUSA113GorillaNew Member Introduct...New to Trike Talk
JohnnyVDA13GorillaNew Member Introduct...Hello I am from Belgium
Bloke10GorillaNew Member Introduct...Hello from Uttoxeter UK
Sunman7GoldWingrGregHonda TrikesF1 Warning Light
ZZMACH11ZZMACH1Harley Tri GlideRinehart VS Vance & Hines for M...
DK Custom Products362rhino 2Harley Tri GlideWhat did you do to Your Tri-Glide T...
Bloke10rhino 2New Member Introduct...Hello from Uttoxeter UK
JohnnyVDA13rhino 2New Member Introduct...Hello I am from Belgium
JohnnyVDA13ol' schoolNew Member Introduct...Hello I am from Belgium
Rogue15Rogue1Harley Tri GlideOil pressure gauge.
JohnnyVDA13JohnnyVDANew Member Introduct...Hello I am from Belgium
Bloke10Jack KlarichNew Member Introduct...Hello from Uttoxeter UK
Bloke10SullyNew Member Introduct...Hello from Uttoxeter UK
Bloke10ol' schoolNew Member Introduct...Hello from Uttoxeter UK
Bloke10hardwickbvNew Member Introduct...Hello from Uttoxeter UK
Bloke10trike ladyNew Member Introduct...Hello from Uttoxeter UK
Burnerboy11BurnerboyCan Am Spyder Trike...How many of you ride a Can Am spyde...
Phill Griggs2Phill GriggsTrike TravelPIE-PIE & PIE
ZZMACH13Longbeard71Harley Tri GlideLooking for Dynajet Power Vision mo...
DK Custom Products3621dn5upHarley Tri GlideWhat did you do to Your Tri-Glide T...
Bloke10BlokeNew Member Introduct...Hello from Uttoxeter UK
Papa Zook2Jack KlarichHarley Tri Glide2024 Harley Trikes Lineup - Laidlaw...
ZZMACH12Jack KlarichHarley Tri GlideElectric Fans on 2014 Tri Glide
ZZMACH13Jack KlarichHarley Tri GlideLooking for Dynajet Power Vision mo...
Davep6Jack KlarichHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
MDO101Jack KlarichHarley Freewheeler /...What Did You Do To Your Freewheeler...
Smitty9013Marc HSidecar ForumSmall crack down the rabbit hole
HDUSA113Marc HNew Member Introduct...New to Trike Talk
DK Custom Products362rhino 2Harley Tri GlideWhat did you do to Your Tri-Glide T...
HDUSA113ZammyNew Member Introduct...New to Trike Talk
Oldman-TriGlide10ZammyHarley Tri GlideEnclosed Trailer Size
Smitty9013ZammySidecar ForumSmall crack down the rabbit hole
TomyJ7TomyJHome Built TrikesShenanigans
HDUSA113Uncle FesterNew Member Introduct...New to Trike Talk
ZZMACH114Uncle FesterHarley Tri GlideNew Member Hello from NH
ZZMACH114stancotreauHarley Tri GlideNew Member Hello from NH
Davep6rhino 2Harley Tri GlideTRI GLIDE AIR FILTER QUESTION
Davep6DavepHarley Tri GlideTRI GLIDE AIR FILTER QUESTION
Smitty9013Smitty901Sidecar ForumSmall crack down the rabbit hole
ZZMACH114TrampasHarley Tri GlideNew Member Hello from NH
Oldman-TriGlide10CasperHarley Tri GlideEnclosed Trailer Size
HDUSA113Jack KlarichNew Member Introduct...New to Trike Talk
ZZMACH114Jack KlarichHarley Tri GlideNew Member Hello from NH
ZZMACH114Bill J. from AustinHarley Tri GlideNew Member Hello from NH
Bill J. from Austin3Bill J. from AustinHarley Freewheeler /...16" front rim?
Bill J. from Austin3Bill J. from AustinHarley Freewheeler /...16" front rim?
ZZMACH114rhino 2Harley Tri GlideNew Member Hello from NH
ZZMACH114DCR2013Harley Tri GlideNew Member Hello from NH
Bill J. from Austin3RKplus10Harley Freewheeler /...16" front rim?
Bill J. from Austin3Papa ZookHarley Freewheeler /...16" front rim?
ZZMACH13ZZMACH1Harley Tri GlideLooking for Dynajet Power Vision mo...
Bill J. from Austin3Bill J. from AustinHarley Freewheeler /...16" front rim?
HDUSA113cycle7447New Member Introduct...New to Trike Talk
HDUSA113hardwickbvNew Member Introduct...New to Trike Talk
ZZMACH114ZZMACH1Harley Tri GlideNew Member Hello from NH
ZZMACH12ZZMACH1Harley Tri GlideElectric Fans on 2014 Tri Glide
Likes Likes:  3,204
Thanks Thanks:  186
Page 104 of 194 FirstFirst ... 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 ... LastLast
Results 2,061 to 2,080 of 3878

Thread: What did you do to Your Tri-Glide Today?

  1. #2061
    1250+ Posts
    Gold Club Member
    ultrafxr's Avatar
    Join Date
    Aug 2017
    Location
    Lakeland, TN
    Posts
    1,447

    Default

    Quote Originally Posted by MDF48 View Post
    Yeah I thought it might have been a SAC medallion. I was in the USAF from May of 1968 to May of 1972. I was in the Air Force Security Service, which back then had nothing to do with police or MP security. It was all overseas except for a couple of places state side. Electronic spying basically during the cold war days.

    It was very interesting, but I was copying morse code everyday for 8 hours and it really got on your nerves at times. I was really thinking of reenlisting if they would let me cross train but my AFSC at that time was critical and they wanted me to stay with USAFSS. I told the Captain that was trying to get me to stay (nice guy) that I would grow a beak and peck sh** with birds before I would copy code 4 more years.

    I was at Homestead my last 10 months and made friends with some local families that were well known in the area. I came real close to staying in Homestead as a civilian but ended up coming back to Jackson MS and going into Law Enforcement for the next 35 years. My best friend went in at the same time I did but he ended up in electronics and worked on ECM equipment on B-52's. He was stationed in Quam and later at Barksdale AFB.
    Small world Mike. My wife is from Jackson, MS. We met when I was stationed at the SAC base in Columbus, MS, and she was in college there. And I too got to spend time in Guam and Okinawa as well. SAC was transitioning back them and moving north with fewer bases so I got to spend my last tour in Izmir, Turkey. Really enjoyed it over there.

  2. #2062
    250+ Posts
    Join Date
    Feb 2016
    Location
    Pelham AL USA
    Posts
    296

    Default HA HA Small World Indeed

    Quote Originally Posted by ultrafxr View Post
    Small world Mike. My wife is from Jackson, MS. We met when I was stationed at the SAC base in Columbus, MS, and she was in college there. And I too got to spend time in Guam and Okinawa as well. SAC was transitioning back them and moving north with fewer bases so I got to spend my last tour in Izmir, Turkey. Really enjoyed it over there.
    Well you are right, it is a small world at times. You are another guy that met his wife while stationed in Columbus. Were you in training there? Now for the other small word item. I spent 18 months from December of 69- April of 71 at Karamursel Air station, Karamursel Turkey. I then spent my last 9 months at a Navy site called Card Sound while stationed at Homestead AFB. the Card Sound site was located south of Homestead. My best friend was also stationed at CAFB before going to Quam.

    I remember getting to watch several B-52 (BUFF's) taking off during an ORI one time at CAFB. It was an impressive and loud display of American air power.

    BTW, I was born and raised in Jackson, Clinton and lived in Madison for many years. Also, our Son finished school in Mechanical Engineering at MS State while his now wife was attending MUW, or the "W" as it was known.
    16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.

  3. #2063
    1250+ Posts
    Gold Club Member
    ultrafxr's Avatar
    Join Date
    Aug 2017
    Location
    Lakeland, TN
    Posts
    1,447

    Default

    Quote Originally Posted by MDF48 View Post
    Well you are right, it is a small world at times. You are another guy that met his wife while stationed in Columbus. Were you in training there? Now for the other small word item. I spent 18 months from December of 69- April of 71 at Karamursel Air station, Karamursel Turkey. I then spent my last 9 months at a Navy site called Card Sound while stationed at Homestead AFB. the Card Sound site was located south of Homestead. My best friend was also stationed at CAFB before going to Quam.

    I remember getting to watch several B-52 (BUFF's) taking off during an ORI one time at CAFB. It was an impressive and loud display of American air power.

    BTW, I was born and raised in Jackson, Clinton and lived in Madison for many years. Also, our Son finished school in Mechanical Engineering at MS State while his now wife was attending MUW, or the "W" as it was known.
    Hi Mike. I can't PM you here on the board but feel free to email me at: harleyjerry@att.net and we can continue this trip down memory lane, lol.

  4. #2064
    250+ Posts
    Join Date
    Feb 2016
    Location
    Pelham AL USA
    Posts
    296

    Default Yes.

    Quote Originally Posted by ultrafxr View Post
    Hi Mike. I can't PM you here on the board but feel free to email me at: harleyjerry@att.net and we can continue this trip down memory lane, lol.
    Yes, I meant to tell you in the last post we probably needed to get it out of this thread and in another forum...just forgot to do it. Will email you.
    16 TGU Mysterious Red / Velocity Red. FM Ceramic Head pipe and FM E-Series tunable exhaust. PV Target Tune-AT WB Tuner. DK Outlaw 606 AC with EBS, Ward’s FCS fans. DK Custom Oil filter/Cooler relocation kit, Comfort Lift and 14 inch shocks. DK tank lift, wind deflectors, floorboard extenders, and tour pak relocator. Chrome TGU wheels. Bad Ass Lights tail lights. Lighted controls and Krome Works 2+2 narrow handle bars.

  5. #2065
    150+ Posts
    Join Date
    Jul 2019
    Location
    marquette mi
    Posts
    177

    Default

    Picked up a trunk guard and highway peg mounts. Guys at the dealer looked bored 3 guys wanted to help, nobody was out -4 and wind will do that up here

  6. #2066
    1250+ Posts
    Gold Club Member
    ultrafxr's Avatar
    Join Date
    Aug 2017
    Location
    Lakeland, TN
    Posts
    1,447

    Default

    Quote Originally Posted by seniorsgt View Post
    Picked up a trunk guard and highway peg mounts. Guys at the dealer looked bored 3 guys wanted to help, nobody was out -4 and wind will do that up here
    When I was up your way last summer I saw that I had lost the plastic cover over the water pump on my 2018 Tri-Glide. Now I doubt that it is really necessary but I thought it was there to protect from flying debris that might damage the pump or coolant lines so I wanted to get it replaced. Bald Eagle H-D there in Marquette is the ONLY dealer in the U P so I made it a point to stop there after leaving Ishpeming. When I inquired about the part they of course did not have it in stock. But they did have a new Tri-Glide on the floor and the parts guy without being asked said he would take the part off his TG and sell it to me. Now that is customer service. Wish all dealers were like that.

  7. #2067
    100+ Posts PTR's Avatar
    Join Date
    Oct 2019
    Location
    DeBary , fl , usa
    Posts
    106

    Default

    Quote Originally Posted by ultrafxr View Post
    When I was up your way last summer I saw that I had lost the plastic cover over the water pump on my 2018 Tri-Glide. Now I doubt that it is really necessary but I thought it was there to protect from flying debris that might damage the pump or coolant lines so I wanted to get it replaced. Bald Eagle H-D there in Marquette is the ONLY dealer in the U P so I made it a point to stop there after leaving Ishpeming. When I inquired about the part they of course did not have it in stock. But they did have a new Tri-Glide on the floor and the parts guy without being asked said he would take the part off his TG and sell it to me. Now that is customer service. Wish all dealers were like that.
    Now that kind of service is REALLY hard to find. I will try that at my local stealer and see what happens.

  8. #2068
    150+ Posts
    Join Date
    Jul 2019
    Location
    marquette mi
    Posts
    177

    Default

    Quote Originally Posted by ultrafxr View Post
    When I was up your way last summer I saw that I had lost the plastic cover over the water pump on my 2018 Tri-Glide. Now I doubt that it is really necessary but I thought it was there to protect from flying debris that might damage the pump or coolant lines so I wanted to get it replaced. Bald Eagle H-D there in Marquette is the ONLY dealer in the U P so I made it a point to stop there after leaving Ishpeming. When I inquired about the part they of course did not have it in stock. But they did have a new Tri-Glide on the floor and the parts guy without being asked said he would take the part off his TG and sell it to me. Now that is customer service. Wish all dealers were like that.
    the dealer has been good all I could get when I got the bike was fender bras,back rest and 1000 mile oil change. sounds like coming off the price isn't a thing a lot of them do.

    you came thru all our road construction, round-a-bouts everywhere

  9. #2069
    1250+ Posts
    Gold Club Member
    ultrafxr's Avatar
    Join Date
    Aug 2017
    Location
    Lakeland, TN
    Posts
    1,447

    Default

    Quote Originally Posted by seniorsgt View Post
    the dealer has been good all I could get when I got the bike was fender bras,back rest and 1000 mile oil change. sounds like coming off the price isn't a thing a lot of them do.

    you came thru all our road construction, round-a-bouts everywhere
    Yes I did and I remember it all too well.

  10. #2070
    850+ Posts Rmitchell55's Avatar
    Join Date
    Dec 2012
    Location
    Santee
    Posts
    894

    Default

    I got my Target Tune Kit from Fuelmoto on Tuesday, so Wednesday morning started pulling the exhaust pipe off. I had purchased a used head pipe and ripped out the cat. converter and welded in 18 mm bungs in preps for installing the wide band O2 sensors. Install sensors and tried to install the pipe, Oh Crap it don't fit. The O2 sensor are much longer than the stock ones. The front one I was able to weld in another bung just a couple inches lower and the rear one I had to change the angle. Got those welded in Thursday morning and got the rest of the wiring done. Sent the map that I had been using off to DynoJet and got it back late yesterday. got it downloaded to my computer and loaded on the Power Vision. So tomorrow going out for a couple of auto tuning runs
    Ray
    2017 Harley Triglide
    Tijuana Border

  11. #2071
    100+ Posts PTR's Avatar
    Join Date
    Oct 2019
    Location
    DeBary , fl , usa
    Posts
    106

    Default

    Today I put new low dust rear brake pads on the Black CVO TG. I plan on finishing the wiring for the third brake light on the Black CVO TG and put low dust brake pads on the White CVO TG by the end of the day if time allows.

  12. #2072
    100+ Posts TrainingWheels's Avatar
    Join Date
    Aug 2019
    Location
    Amarillo, Texas, USA
    Posts
    119

    Default

    Made appointment for next week to get 10" bars put on:-) I added them to my 2015t Ultra Classic and loved them

  13. #2073
    13000+ Posts FuzzyWuzHe's Avatar
    Join Date
    Dec 2014
    Location
    Grand Junction, Co. USA
    Posts
    13,241

    Default

    Quote Originally Posted by Rmitchell55 View Post
    I got my Target Tune Kit from Fuelmoto on Tuesday, so Wednesday morning started pulling the exhaust pipe off. I had purchased a used head pipe and ripped out the cat. converter and welded in 18 mm bungs in preps for installing the wide band O2 sensors. Install sensors and tried to install the pipe, Oh Crap it don't fit. The O2 sensor are much longer than the stock ones. The front one I was able to weld in another bung just a couple inches lower and the rear one I had to change the angle. Got those welded in Thursday morning and got the rest of the wiring done. Sent the map that I had been using off to DynoJet and got it back late yesterday. got it downloaded to my computer and loaded on the Power Vision. So tomorrow going out for a couple of auto tuning runs
    Be interested to see results ... My standard auto tuning is pretty good, but always wonder if I should go with the wide band.

  14. #2074
    13000+ Posts FuzzyWuzHe's Avatar
    Join Date
    Dec 2014
    Location
    Grand Junction, Co. USA
    Posts
    13,241

    Default F4, Sheepskin and Flags

    Decent Day, overcast but like 50*.

    First I touched up all the little chips on the Jeep ... getting ready to do the ceramic on it.

    Next, I did the install on the F4 windshield.

    Name:  F4 Cockpit.jpg
Views: 276
Size:  294.9 KB

    Looks like a stock one, but, it's thicker and soooo much clearer.

    Then I notched the sheepskin to accept the back rest. First I pulled the sheepskin back towards the rear until I could "see" the opening for the backrest. Marked the opening with a Sharpy.

    Name:  Sheap Skin Line.jpg
Views: 284
Size:  361.6 KB

    Next I took it off and put it on a board and notched the skin from the back.

    Name:  Sheap Skin Hole.jpg
Views: 283
Size:  233.8 KB

    Back on the trike with the Backrest installed.

    Name:  Sheap Skinn Front.jpg
Views: 277
Size:  357.6 KB

    A couple pics showing the ends "tucked in" ... shouldn't go anywhere.

    Left

    Name:  Sheap Skin Left.jpg
Views: 281
Size:  417.0 KB

    Right, sorry about the fat finger on the edge of the lens.

    Name:  Sheap Skin Right.jpg
Views: 280
Size:  290.8 KB

    More in next post.

  15. #2075
    13000+ Posts FuzzyWuzHe's Avatar
    Join Date
    Dec 2014
    Location
    Grand Junction, Co. USA
    Posts
    13,241

    Default Flags

    Then I did the flag Badging. Been too cold to do these since I got them.

    Tank Right.

    Name:  Flag Tank Right.jpg
Views: 276
Size:  310.6 KB

    Tank Left

    Name:  Flag Tank Left.jpg
Views: 282
Size:  334.7 KB

    Rear

    Name:  Flag Rear.jpg
Views: 273
Size:  426.2 KB

    Front

    Name:  Flag Front.jpg
Views: 287
Size:  275.1 KB

  16. #2076
    100+ Posts PTR's Avatar
    Join Date
    Oct 2019
    Location
    DeBary , fl , usa
    Posts
    106

    Default

    I finally finished hooking up the 3rd brake light wiring.

  17. #2077
    Contributing Member ROAD DOG's Avatar
    Join Date
    Jan 2009
    Location
    MA,
    Posts
    1,006

    Default Stage 3

    Anybody do a stage 3 on there M8 ? I did a stage 2 did not think much improvement ? I ordered a stage 3 Saturday , going to install myself ? I no I will loose my warranty B F D they would find a reason to not warranty it anyway .

  18. #2078
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Quote Originally Posted by FuzzyWuzHe View Post
    Be interested to see results ... My standard auto tuning is pretty good, but always wonder if I should go with the wide band.
    The Target Tune made a pretty significant improvement over a good standard auto tune on my Sportster....but I've never felt the need to get that extra on the Tri Glide. Well, it would be nice, but never felt it was worth it, but that's just me. If one was looking to eek out every bit they could, it is the way to go. HERE are more details on it. Gotta have the wide band bungs in the header too.

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  19. #2079
    Sponsor
    TrikeTalk Sponsor
    DK Custom Products's Avatar
    Join Date
    Jun 2013
    Location
    Red Banks, MS
    Posts
    9,134

    Default

    Quote Originally Posted by ROAD DOG View Post
    Anybody do a stage 3 on there M8 ? I did a stage 2 did not think much improvement ? I ordered a stage 3 Saturday , going to install myself ? I no I will loose my warranty B F D they would find a reason to not warranty it anyway .
    Most folks that are not happy with their Stage I or Stage II is because the Stage I is a mediocre one...ie. not a Performance Stage I.

    The Stage I is the basis for all future upgrades. Got to have a good foundation to build on.

    Here's a LINK to some useful info on the subject.

    We see it all the time...folks who have done a Stage I AND a Stage II and are not getting as much of a power increase as folks who do a Performance Stage I.

    LINK to more important info on the subject.

    Kevin
    www.DKCustom.com

    Gear Up & Ride in! DK Custom 4th Annual Open House, June 8th. 🏍️ Click HERE For The Lowdown.

    Call: 662-252-8828 Text: 662-420-4891
    Email: Support@DKCustomProducts.com


  20. #2080
    13000+ Posts FuzzyWuzHe's Avatar
    Join Date
    Dec 2014
    Location
    Grand Junction, Co. USA
    Posts
    13,241

    Default

    Quote Originally Posted by DK Custom Products View Post
    The Target Tune made a pretty significant improvement over a good standard auto tune on my Sportster....but I've never felt the need to get that extra on the Tri Glide. Well, it would be nice, but never felt it was worth it, but that's just me. If one was looking to eek out every bit they could, it is the way to go. HERE are more details on it. Gotta have the wide band bungs in the header too.

    Kevin
    Hmmmmm ... not sure I'm up to pulling the exhaust again ... LOL ... then weld new bungs ... spend more $$$ ... FBG runs pretty well now and the maps are updated ... oil is gonna get cooler ... the rocker lockers will make her sound like a Gold Wing ... life is good.

Similar Threads

  1. Purchased New Tri Glide Today
    By Marv1 in forum Harley Tri Glide
    Replies: 51
    Last Post: 12-11-2021, 04:56 PM
  2. I sat on one today
    By werewolf in forum Can Am Spyder Trikes
    Replies: 7
    Last Post: 11-11-2013, 01:30 PM
  3. Low mileage 2010 tri glide trike street glide
    By jwkhd1 in forum Harley Tri Glide
    Replies: 15
    Last Post: 09-20-2012, 07:54 AM
  4. Got it today
    By hitime in forum General Discussion
    Replies: 8
    Last Post: 09-06-2009, 06:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •