Clutch Switch Issue

[MDGeorge]

UPDATE: Adjustments done. Radio works.
Backup lights and running lights do not.

Honda Tech has called CSC.
CSC has referred to their engineers.

Pfff.

[John Luciano]

Back up lights, you have back up lights?

[MDGeorge]

LOL.
Yep

[cavie]

I appreciate your input. Thanks.

If it were the side stand, would it not cut the ignition off?

Depends on the builder. Since the kick stand was going away he may have decided to use that part of the wiring to power the stereo and didn't know what he was doing.

[MDGeorge]

FIGURED IT OUT...
The ancillary ground from the kit was not grounded.


That's it.
Everything works.

[driver10]

if you have taken your top shelter off check to see if the antenna is plugged in good. sounds like when your standing still it is making contact but when your moving it is not.

[cmore]

UPDATE: Adjustments done. Radio works. Backup lights and running lights do not. Honda Tech has called CSC. CSC has referred to their engineers. Pfff.

So MDGeorge, the side stand switch was your problem with the audio sound? If I remember mine would not run if the side stand switch was set wrong. I had to adjust mine to or it would die when I put it in gear (if I remember right ). Mine starts and goes down the road fine.

[davi5894]

FIGURED IT OUT...

The ancillary ground from the kit was not grounded.

That's it.

Everything works.

Where is the ancillary ground location?

[HPSC]

Where is the ancillary ground location?

This thread just helped me greatly. I had the same exact issue and bike. (2012 GL18 CSC Viper).

The ground wire I needed was the white wire from CSC Body (harness on left side with backup wiring). My issue was battery was replaced and white wire was on battery positive instead of negative.

[rhino 2]

This thread just helped me greatly. I had the same exact issue and bike. (2012 GL18 CSC Viper).

The ground wire I needed was the white wire from CSC Body (harness on left side with backup wiring). My issue was battery was replaced and white wire was on battery positive instead of negative.

Shawn.........Welcome To Trike-Talk..............

[Gorilla]

This thread just helped me greatly. I had the same exact issue and bike. (2012 GL18 CSC Viper).

The ground wire I needed was the white wire from CSC Body (harness on left side with backup wiring). My issue was battery was replaced and white wire was on battery positive instead of negative.

Shawn welcome aboard. we are here to share our knowledge.